Guide to securing ForgeRock® Directory Services deployments.

Preface

ForgeRock Identity Platform™ serves as the basis for our simple and comprehensive Identity and Access Management solution. We help our customers deepen their relationships with their customers, and improve the productivity and connectivity of their employees and partners. For more information about ForgeRock and about the platform, see https://www.forgerock.com.

The ForgeRock Common REST API works across the platform to provide common ways to access web resources and collections of resources.

This guide helps you to reduce risk and mitigate threats to directory service security.

A guide to securing directory services can go wrong for many reasons, including at least the following:

  • The author fails to understand or to properly explain the subject.

  • The reader fails to understand or to act on what is written.

  • Bugs exist in the directory's security-related features.

The author of this guide aim to understand before attempting explain directory security.

The reader would do well to gain grounding in securing services and systems, and in applying and designing processes that prevent or mitigate threats, before reading the guide with a critical eye and a grain of salt. This is not a guide to getting started with security.

In reading and following the instructions in this guide, you will learn how to:

  • Identify common threats to directory service security

  • Understand the features designed to make directory services more secure

  • Use operating system features to improve security

  • Use Java features to improve security, and keep Java software up to date

  • Use web container security features to protect the DSML and REST to LDAP gateways

  • Make installation of ForgeRock Directory Services software more secure after setup

  • Manage ForgeRock Directory Services certificates and private keys

  • Secure connections from client applications to ForgeRock Directory Services

  • Configure secure authentication mechanisms

  • Secure directory administration and render administration more subject to audit

  • Secure access from client applications to directory data

  • Protect directory data within the server and on disk

  • Encourage best practices by client application developers

  • Use ForgeRock Directory Services features to monitor directory security

  • Test directory services for security before deployment

1. Accessing Documentation Online

ForgeRock publishes comprehensive documentation online:

  • The ForgeRock Knowledge Base offers a large and increasing number of up-to-date, practical articles that help you deploy and manage ForgeRock software.

    While many articles are visible to community members, ForgeRock customers have access to much more, including advanced information for customers using ForgeRock software in a mission-critical capacity.

  • ForgeRock product documentation, such as this document, aims to be technically accurate and complete with respect to the software documented. It is visible to everyone and covers all product features and examples of how to use them.

2. Using the ForgeRock.org Site

The ForgeRock.org site has links to source code for ForgeRock open source software, as well as links to the ForgeRock forums and technical blogs.

If you are a ForgeRock customer, raise a support ticket instead of using the forums. ForgeRock support professionals will get in touch to help you.

3. Getting Support and Contacting ForgeRock

ForgeRock provides support services, professional services, training through ForgeRock University, and partner services to assist you in setting up and maintaining your deployments. For a general overview of these services, see https://www.forgerock.com.

ForgeRock has staff members around the globe who support our international customers and partners. For details on ForgeRock's support offering, including support plans and service level agreements (SLAs), visit https://www.forgerock.com/support.

Chapter 1. Threats to Directory Services

In this chapter you will review common threats to secure directory services, which you can mitigate by following the instructions in this guide.

1.1. Insecure Client Applications

Directory services are well suited as a central, distributed store for identity data and credentials.

Standard access protocols, and delegated access and data management mean you might not know which client applications use your services. Some client applications might not behave securely, however. Be sure to encourage secure client application behavior:

  • Prevent insecure connections.

    Have applications connect with LDAPS and HTTPS, and make sure that you restrict the protocol versions and cipher suites for negotiating secure connections to those with no known vulnerabilities. For details, see "Securing Network Connections".

  • Accept only secure management of sensitive data.

    Nothing in LDAPv3 or HTTP prevents a client application from sending credentials and other sensitive account data in cleartext. You can configure the directory to discourage the practice, however.

    As much as possible, require that applications connect with LDAPS and HTTPS.

    For public directory server information, such as root DSE attributes and LDAP schema, allow applications to read anonymously over LDAP, and to request a StartTLS extended operation over LDAP, but set ACIs to deny other operations.

  • Encourage secure authentication.

    For details, see "Securing Authentication".

  • Encourage best practices for client applications, such as those described above and scrubbing input to avoid injection vulnerabilities.

    Best practices are described in "Best Practices for Client Applications".

1.2. Abusive Client Applications

In addition to the threats described in "Insecure Client Applications", client applications can abuse directory services.

Abuse can be innocent, where poorly constructed or incorrectly configured clients waste server resources. In such cases, you might help the owner fix the problem.

Abuse can be intentional, as in a denial-of-service attack. In such cases, you must aim to protect the directory service itself.

Unreasonable requests from client applications include the following:

  • Unindexed searches that would require the directory to evaluate all entries.

    Unindexed searches are not allowed by default for normal accounts, adjustable with the unindexed-search privilege.

    The access log records attempts to perform unindexed searches.

  • Excessive use of overly broad persistent searches, particularly by clients that do not process the results quickly.

    Review requests before setting ACIs to grant access to use the persistent search control. Client applications might alternatively read the external change log, as described in "Change Notification For Your Applications" in the Administration Guide. See also "To Limit Concurrent Persistent Searches" in the Administration Guide.

  • Extremely large requests, for example to update directory entries with large values.

    By default, requests larger than 5 MB are refused, according to the connection handler setting, max-request-size.

  • Requests that make excessive demands on server resources.

    Set resource limits as described in "Setting Resource Limits".

  • Requests to read entire large group entries only to check membership.

    Encourage client applications to read the isMemberOf attribute on the account instead.

1.3. Weak Passwords and Bad Password Management

Despite efforts to improve how people manage passwords, users have more passwords than ever before, and many use weak passwords. In addition to consolidating identity providers, and using modern access management protocols like OAuth 2.0 to avoid password proliferation, you can ensure the safety of passwords that you cannot eliminate.

As a central source of authentication credentials, directory services provide excellent password management capabilities. OpenDJ servers have flexible password policy settings, and a wide range of safe password storage options. Be sure that the passwords stored in your directory service are appropriately strong and securely stored.

For details, see "Configuring Password Policy" and "Enforcing Strong Passwords and Strong Password Storage".

Manage passwords for server administration securely as well. Passwords supplied to directory server tools can be provided in files, interactively, through environment variables, or as system property values. Choose the approach that is most appropriate and secure for your deployment.

Also make sure that directory administrators manage their passwords well. To avoid password proliferation for directory administrators, consider assigning administration privileges and granting access to existing accounts for delegated administrative operations. For details, see "Securing Directory Administration" and "Securing Access to Directory Data".

1.4. Misconfiguration

With the power to administer directory services comes the responsibility to make sure the configuration is correct. Misconfiguration can arise from bad or mistaken configuration decisions, and from poor change management.

Bad configuration decisions can result in problems such as the following:

  • A particular feature stops working.

    Depending on the configuration applied, features can stop working in obvious or subtle ways.

    For example, if a configuration change prevents the server from making LDAPS connections, many applications will no longer be able to connect, and so the problem will be detected immediately. If the configuration change simply allows insecure TLS protocol versions or cipher suites for LDAPS connections, some applications will negotiate insecure TLS, but they will appear to continue to work properly.

  • Access policy is not correctly enforced.

    Incorrect parameters for secure connections and incorrect ACIs can lead to overly permissive access to directory data, and potentially to a security breach.

  • The server fails to restart.

    Although failure to start a server is not directly a threat to security, it can affect dependent identity and access management systems.

    Generally a result of editing the server configuration LDIF incorrectly, this problem can usually be avoided by using configuration tools instead, such as dsconfig and dsreplication. A server that started correctly saves a copy of the configuration in config/config.ldif.startok. You can compare this with config/config.ldif if the server fails to restart.

To guard against bad configuration decisions, implement good change management:

  • For all enabled features, understand why they are enabled and what your configuration choices mean.

    This implies review of configuration settings, including default settings that you accept.

  • Validate configuration decisions with thorough testing.

    For details, see "Testing Secure Deployments".

  • Maintain a record of your configurations and the changes applied.

    For example, use a filtered directory audit log and version control software for any configuration scripts and to record changes to configuration files.

    Make sure you also maintain a record of external changes on the system, such as changes to operating system configuration, and updates to software such as the JVM that introduce security changes.

  • Strongly encourage owners of applications that change ACIs, collective attributes, and similar settings in directory data to also follow good change management practices.

1.5. Unauthorized Access

Data theft can occur from outside the directory service when access policies are too permissive, and when the credentials to gain access are too easily cracked. It can occur from inside when the data is not protected, when administrative roles are too permissive, and when administrative credentials are poorly managed.

To protect against unauthorized access over the network, see the suggestions in "Insecure Client Applications", "Weak Passwords and Bad Password Management", and "Securing Access to Directory Data".

To protect against unauthorized access from those inside the organization who might gain access to directory files, see the suggestions in "Protecting Directory Files", and "Securing Directory Administration". Encrypt backup files as described in "Protect OpenDJ Server Files".

1.6. Poor Risk Management

In addition to the risks associated poor configuration management outlined in "Misconfiguration", threats can arise when plans fail to account for outside risks.

Develop appropriate answers to at least the following questions:

  • What happens when a server or an entire data center becomes unavailable?

  • How do you remedy a serious security issue in the service, either in the directory service software or the underlying systems?

  • How do you validate mitigation plans and remedial actions?

  • How do client applications deal with the directory service being offline?

    If client applications require always-on directory services, how do your operations ensure high availability, even when a server or data center goes offline?

For a critical directory service, you must test both normal, expected operation as described in "Testing Secure Deployments", and procedures to recover from disaster.

Chapter 2. About Security Features

An important part of understanding how to make directory services secure is understanding directory server security features. In this short introduction to security features you will learn the basics of how OpenDJ software handles the following:

  • Encryption and digests

  • Connection management

  • Cryptographic key management

  • Authentication

  • Authorization

  • Monitoring and logging

2.1. Storing Encrypted Data or Digests

When OpenDJ servers must store sensitive data, and simply protecting the data on the file system is not sufficient, they can either store encrypted data or a digest:

  • Encryption turns source data into a reversible code. Good design makes it extremely hard to recover the data from the code without the decryption key.

    Encryption in the directory uses keys and cryptographic algorithms to convert source data into encrypted codes and back again. Given the decryption key and the details of the algorithm, converting an encrypted code back to source data is straightforward, though it can be computationally intensive.

    OpenDJ software does not implement its own versions of all encryption algorithms. Instead, it often relies on cryptographic algorithms provided by the underlying JVM. An OpenDJ server does manage access to encryption keys, however. An important part of server configuration concerns key management, as described below.

  • A digest (also called a hash) is a non-reversible code generated from source data using a one-way hash function. (A hash function is one that converts input of arbitrary size into output of fixed size.) Good one-way hash design design makes it impossible to retrieve the source data even if you have access to the hash function.

    The hash function does make it easy to check whether a given value matches the original. Convert the value into a digest with the same hash function. If the new digest matches the original digest, then the values are also identical.

In OpenDJ software, two types of encryption keys are used:

  1. Symmetric keys, also called secret keys because they must be kept secret.

    A single symmetric key is used for both encryption and decryption.

  2. Asymmetric key pairs, consisting of a sharable public key and a secret private key.

    Either key can be used for encryption and the other for decryption.

An OpenDJ server uses encryption in a number of ways. For example, the server can encrypt backend databases and backup files on disk. It can also encrypt password values. Another important use of encryption is to make network connections secure. For details about encryption keys, see "About Certificates, Private Keys, and Secret Keys". For information about symmetric key distribution, see "Cryptographic Key Management", and "How Secret Keys are Distributed".

An OpenDJ server uses digests in a number of ways. For example, the server can store salted password hashes instead of encrypted passwords, making the original passwords extremely hard to recover even given access to the values that are stored. (In this context, salt is random data used as additional input to a hash function to increase the difficulty of cracking the passwords by applying the hash function to common passwords and looking for matches.) It also uses digests for authentication as described in "Authenticating Using Digest MD5".

2.2. Connection Management

OpenDJ server management of incoming client connections is built on connection handlers. Each connection handler is responsible for accepting client connections, reading requests, and sending responses. Connection handlers are specific to the protocol used. In other words, the connection handlers for LDAP and HTTP are different.

When you configure a connection handler, you specify whether it secures incoming connections, and the security protocols and cipher suites that can be used to negotiate a secure connection. In practice, separate connection handlers are often set up for cleartext (LDAP, HTTP) and secure (LDAPS, HTTPS) traffic. (A cleartext LDAP connection handler can support the StartTLS LDAP extended operation to initiate security after the connection is established, but for security from the moment the connection is established, you configure a separate LDAPS connection handler with use-ssl: true in its configuration.)

When you configure a connection handler that secures incoming connections from the network, you specify a key manager provider and a trust manager provider. A key manager provider handles the key material that is used to authenticate a secure connection to its peer. This means providing access to the server certificate when negotiating a secure connection. A trust manager provider determines whether to trust a certificate presented by the peer. This involves determining whether to trust the client certificate issuer. For client certificates signed by a well-known CA, the decision to trust the issuer can be delegated to the JVM, which comes with its own set of trusted CA certificates. If the issuer is not well-known, its trusted certificate must be stored in a truststore, which is a keystore handled by a trust manager provider.

Configuration of outgoing connections depends on the feature, but generally includes a mechanism for securing the connection. Make sure you have a way of securing all connections that carry sensitive information.

For details on securing connections, see "Securing Network Connections".

2.3. Cryptographic Key Management

An OpenDJ server uses cryptographic mechanisms for more than setting up secure connections:

  • Encrypted backup files must be decrypted when restored.

  • Passwords can be protected by encryption rather than hashing.

  • Database backends can be encrypted for data confidentiality and integrity.

  • Servers in a replication topology must authenticate to and trust each other.

For all operations where data is stored in encrypted form, the secret key for encryption must be distributed to all replicas that need to decrypt the data.

Trust between servers for administrative and replication connections depends on a public key infrastructure involving instance key pairs. (This type of infrastructure is explained in more detail in "Public Key Infrastructure (PKI)".) Each server has an asymmetric key pair, its instance key pair, where the public key certificate is self-signed by default.

When you configure replication, which establishes trust between the servers, they exchange and trust each others' instance key certificates. This enables servers to secure subsequent network connections for replication, and also to distribute secret keys. Each secret key is encrypted with each server's public key, stored in the administrative data for the server, and replicated in encrypted form across the topology. When a server needs the private key for decryption or further encryption, it decrypts its copy with its own private instance key. For details about how secret keys are stored in the administrative data, see "How Secret Keys are Distributed".

The component that enables this replication-based secret key distribution mechanism is called the OpenDJ Crypto Manager. Beyond its role in secret key distribution, the Crypto Manager provides a common interface for performing compression, decompression, hashing, encryption, and other kinds of cryptographic operations.

You can configure the following Crypto Manager features with the dsconfig command:

  • How keys are protected (wrapped) when stored in the administrative data.

  • The alias of the key pair to use for securing administrative and replication connections.

  • The protocols and cipher suites that can be negotiated for securing administrative and replication connections.

  • Cipher key lengths, algorithms, and other advanced properties.

2.4. Authentication

Authentication is the act of confirming the identity of a principal, such as a user, application, or device. The main reason for authentication is to control access based on the identity of the principal.

Servers should require authentication before allowing access to any information that is not public.

Authentication mechanisms depend on the access protocol. HTTP has a number of mechanisms, such as HTTP Basic. LDAP has other mechanisms, such as anonymous bind and external SASL. For details on supported mechanisms, see "Securing Authentication".

2.5. Authorization

Authorization is the act of determining whether to grant or to deny a principal access to a resource.

An OpenDJ server authorizes access based these mechanisms:

  • Access control instructions (ACI)

    Access control instructions apply to directory data, providing fine-grained control over what a user or group member is authorized to do in terms of LDAP operations. Most access control instructions specify scopes (targets) to which they apply such that an administrative user who has all access to dc=example,dc=com need not have any access to dc=example,dc=org.

  • Administrative privileges

    Privileges control the administrative tasks that users can perform, such as bypassing the access control mechanism, performing backup and restore operations, making changes to the configuration, and other tasks.

    By default, privileges restrict administrative access to directory root users, though any user can be assigned a privilege. Privileges apply to an OpenDJ server, and do not have a scope.

  • Global access control policies

    Global access control policies provide coarse-grained access control suitable for use on proxy servers, where the lack of local access to directory data makes ACIs a poor fit.

Note

Access control instructions (ACI) and global access control policies rely on different access control handlers, which implement different access control models. ACIs rely on the DSEE-compatible access control handler. (DSEE refers to Sun Java System Directory Server Enterprise Edition.) Global access control policies rely on the policy-based access control handler. A server can only use one handler at a time.

Take the following constraints into consideration:

  • When the policy-based handler is configured, ACIs have no effect.

  • When the DSEE-compatible handler is configured, global access control policies have no effect.

  • When a server is set up as a directory server, it uses the DSEE-compatible access control handler, with ACIs in directory data and global ACIs in the configuration.

  • When a server is set up as a directory proxy server, it uses the policy-based access control policy handler, and global access control policies.

  • Once the server has been set up, the choice of access control handler cannot be changed with the dsconfig command.

ACIs are set as attributes on directory entries, either in the user data where they can apply to that data, or in the directory configuration where they can apply for an entire server.

Many ACIs can be defined. Each ACI specifies:

  • The target the ACI applies to.

  • The permissions that the ACI grants or denies.

  • The subjects that specify who the ACI applies to, depending on when, where, and how they connected.

ACI evaluation only allows access that is explicitly granted. Without ACIs, no regular users are allowed any access to directory data. (OpenDJ servers have default global settings that allow minimal access.) If access is denied according to an applicable ACI, then the denial takes precedence over any access granted. Only if all applicable ACIs grant access is the access allowed.

Global access control policies are similar to ACIs, but are implemented as entries in the server configuration, rather than attributes on entries. Global access control policies can only allow access, not deny it. This constraint makes them easier to read and to change in isolation.

For details and instructions on using ACIs with directory servers, or global access control policies with proxy servers, see "Securing Access to Directory Data".

Administrative privileges provide access control for server administration independently from ACIs and access control policies. Even if a principal is granted access through applicable ACIs and policies, administrative access is still prevented if the principal does not have the requisite privilege.

Privileges are also stored as attributes on directory entries.

For details and instructions on using privileges, see "Securing Directory Administration".

2.6. Monitoring and Logging

Once directory services are properly deployed and configured, they must be monitored for evidence of threats and other problems. Interfaces for monitoring include the following:

  • Remote monitoring facilities that clients applications can access over the network including JMX and SNMP connection handlers, and the cn=monitor directory backend that is exposed over LDAP and HTTP.

  • Alerts to notify administrators of significant problems or notable events over JMX or by email.

  • Account status notifications to send users alerts by email, or to log error messages when an account state changes.

  • Logging facilities, including local log files for access, debugging, entry change auditing, and errors, and ForgeRock Common Audit event handlers for both local logging and sending access event messages to a variety of remote logging and reporting systems.

For details, see "Monitoring Directory Security".

Chapter 3. Securing the Operating System

When you deploy ForgeRock Directory Services software, secure the host system to limit the risk that someone with access to the system can get more access than they should.

This chapter covers basic precautions to take when preparing the operating system where you deploy ForgeRock Directory Services software:

  • Apply system patches and upgrades in a timely manner

  • Turn off unnecessary system features, services, and accounts

  • Limit system and administrative access

  • Audit system access

This chapter is not meant to be exhaustive. Familiarize yourself with the specific recommendations for and security features of the host operating systems where you deploy ForgeRock Directory Services software.

3.1. Applying System Patches, Service Packs, and Upgrades

Over the lifetime of a directory services deployment, vulnerabilities and security issues can be discovered in the host operating systems where OpenDJ software is deployed. Some of these issues require upgrades to the host operating system. Others require configuration changes. All updates require proactive planning and careful testing.

For the operating systems used in production, put a plan in place for avoiding and resolving security issues. The plan should answer the following questions:

  • How does your organization become aware of system security issues early?

    This could involve following bug reports, mailing lists, forums, and other sources of information.

  • How do you test security fixes, including configuration changes, patches, service packs, and system updates?

    Validate the changes first in development, then in one or more test environments, then in production in the same way you would validate other changes to the deployment.

  • How do you roll out solutions for security issues?

    In some cases, fixes might involve both changes to the service, and specific actions by those who use the service.

  • What must you communicate about security issues and how you handle them?

Keep in mind that operating system and software providers typically do not communicate what they know about a vulnerability until they have a way to mitigate or fix the problem. Once they do communicate about security issues, however, the information is likely to become public knowledge quickly. Make sure that you can expedite resolution of security issues.

In order to move resolve security issues quickly, make sure that you are ready to validate any changes that must be made. When you validate a change, check that the fix resolves the security issue, and that the system and OpenDJ software continue to function as expected in all the other ways that they are used.

3.2. Enabling Only Required Features, Accounts, and Services

By default, operating systems include many features, accounts, and services that are not required to run and manage OpenDJ software. Each optional feature, account, and service on the system brings a risk of additional vulnerabilities. To reduce the surface of attack, you enable only required features, system accounts, and services, and remove those that are not needed for the deployment.

The features needed to run and manage OpenDJ software securely include the following:

  • A Java runtime environment, required to run OpenDJ software.

    For details, see "Securing the Java Installation".

  • Software to secure access to service management tools, in particular when administrators access the system remotely.

  • Software to secure access for remote transfer of software updates, backup files, and log files.

  • Software to manage system-level authentication, authorization, and accounts.

  • Firewall software, intrusion-detection/intrusion-prevention software.

    Configure the firewall to limit access as much as possible. For example, open the OpenDJ administration connector port only to traffic from the loopback address, and require that administrators first connect to the host over SSH before assuming the OpenDJ administrator identity.

  • Software to allow auditing access to the system.

    Ideally, the audit system runs in a configuration that prevents an attacker from tampering with audit records.

  • System update software to allow updates that you have validated previously.

  • If required for the deployment, system access management software such as SELinux.

  • If the OpenDJ server sends email alerts locally, mail services.

  • If you use SNMP with OpenDJ server software, an SNMP agent.

  • Any other software that is clearly indispensable to the deployment.

Some server operating system distributions have minimal installation options that allow you to choose most of the system features to enable. Other operating system distributions require you to turn off services that you do not use. In either case, validate OpenDJ software and administrative operations with a minimal system.

In addition to limiting what is installed and running on the system, consider configuration options for system hardening to further limit access even to required services.

For each account used to run a necessary service, aim to limit the access granted to the account to what is required to run the service. This reduces the risk that a vulnerability in access to one account affects multiple services across the system.

Make sure that you validate the operating system behavior every time you deploy something that is new or that has changed. When preparing the deployment and when testing changes, maintain a full operating system with OpenDJ software that is not used for any publicly available services, but only for troubleshooting problems that might stem from the system being too minimally configured.

3.3. Limiting System and Administrative Access

In addition to minimizing what the host system does as described in "Enabling Only Required Features, Accounts, and Services", limit access to the system by protecting network ports and reducing access granted to administrative accounts. This further reduces the attack surface and reduces the advantage to be gained from exploiting a vulnerability.

The TCP/IP ports that must be protected are described in "Server Ports". When protecting network ports, notice that some must be open to remote client applications, whereas you can restrict access to administrative ports to the localhost only, assuming administrative access to the host is protected with another protocol such as SSH.

Server Ports
ProtocolsConventional PortsActive by Default?Description

LDAP

389

No

Port for cleartext LDAP requests; also used to request StartTLS for a secure connection.

The reserved LDAP port number is 389.

Interactive setup initially suggests this port number. If the initially suggested port is not free or cannot be used due to lack of privileges, interactive setup adds 1000 to the port number and tries again, repeatedly adding 1000 until a free port is found.

If LDAP is used, leave this port open to client applications.

LDAPS

636

No

Port for secure LDAPS requests.

The standard LDAPS port number is 636.

Interactive setup initially suggests this port number. If the initially suggested port is not free or cannot be used due to lack of privileges, interactive setup adds 1000 to the port number and tries again, repeatedly adding 1000 until a free port is found.

If LDAPS is used, leave this port open to client applications.

HTTP, HTTPS

80, 443

No

Port for HTTP client requests, such as RESTful API calls.

The standard HTTP port number is 80. The standard HTTPS port number is 443.

Interactive setup initially suggests 8080 and 8443 instead. If an initially suggested port is not free or cannot be used due to lack of privileges, interactive setup adds 1000 to the port number and tries again, repeatedly adding 1000 until a free port is found.

If HTTP or HTTPS is used, leave this port open to client applications.

For production deployments, use HTTPS instead of HTTP.

Server administration

4444

Yes

Port for administrative requests, such as requests from the dsconfig command.

Interactive setup initially suggests 4444. If an initially suggested port is not free or cannot be used due to lack of privileges, interactive setup adds 1000 to the port number and tries again, repeatedly adding 1000 until a free port is found.

Initial setup secures access to this port.

Directory data replication

8989

No

Port for replication requests, using the OpenDJ-specific replication protocol.

Interactive setup initially suggests 8989. If an initially suggested port is not free or cannot be used due to lack of privileges, interactive setup adds 1000 to the port number and tries again, repeatedly adding 1000 until a free port is found.

If replication is used, leave this port open to other replicas.

For production deployments, secure access to this port.

JMX

1689

No

Port for Java Management eXtension requests (1689), and JMX RMI requests.

The default setting for the JMX RMI port is 0, meaning the service chooses a port of its own. This can be configured using the JMX connection handler rmi-port setting

If used in production deployments, secure access to this port.

SNMP

161, 162

No

Reserved ports are 161 for regular SNMP requests and 162 for traps.

If used in production deployments, secure access to these ports.


When setting up system accounts to manage directory services, set up a separate account as described in "Setting Up a System Account for an OpenDJ Server". Prevent other system accounts from accessing OpenDJ files as further described in "Protect OpenDJ Server Files". Configure the system to prevent users from logging in as the OpenDJ system account user, and from performing other operations besides managing directory services when using the OpenDJ system account.

3.4. Auditing System Access

OpenDJ logs provide a record of directory service events, but they do not record system-level events. Use the auditing features of the host operating system to record access that is not recorded in OpenDJ logs.

System audit logs make it possible to uncover system-level security policy violations, such as unauthorized access to OpenDJ files, that would not be visible in OpenDJ logs and monitoring information.

In addition to configuring system audit logging, consider how you will prevent or at least detect tampering. A malicious user violating security policy is likely to try to remove evidence of how security was compromised.

Chapter 4. Securing the Java Installation

This chapter describes how to use:

  • The strongest cryptography provided by the Java runtime environment

  • The latest Java security updates

4.1. Using Unlimited Strength Cryptography

Due to export control restrictions, some Java environments, such as the Oracle JRE, ship with a policy that allows only limited strength cryptography. This can prevent an OpenDJ server from being able to use some encryption algorithms at full strength.

Assuming your operations are in a location where unlimited strength cryptography is allowed, you can install an unlimited strength policy. For example, Oracle provides an unlimited strength JCE policy extension that unlocks the full cryptographic strength supported by their JVM.

The policy files and download links are specific to the JVM. You can find the appropriate versions online.

Installing the policy generally involves copying a jar file into the $JAVA_HOME/lib/security/ directory of the JVM. Read the instructions closely, taking care to copy the files to the correct directory, which is different for the JRE and JDK, as the JDK contains the JRE.

Each time you update the Java environment, you must copy the policy file again.

4.2. Using Java Security Updates

Security updates are regularly released for the Java runtime environment.

Make sure that your operational plans provide for deploying Java security updates to systems where you run OpenDJ software.

When you install an OpenDJ server, the path to the Java runtime environment is saved in the configuration. The server continues to use that Java version until you change the configuration as described below.

To Apply Java Security Updates

Follow these steps each time an update to the Java runtime environment changes the Java home path where the runtime environment is installed:

  1. (Optional) If the previous Java update used an unlimited strength cryptography policy, install the policy for the updated Java runtime environment as described in "Using Unlimited Strength Cryptography".

  2. (Optional) If an OpenDJ server relies on any CA certificates that were added to the Java runtime environment truststore, $JAVA_HOME/Home/jre/lib/security/cacerts, for the previous update, add them to the truststore for the update Java runtime environment.

  3. Edit the default.java-home setting in the file config/java.properties to use the new path.

    The setting should reflect the updated Java home:

    default.java-home=/path/to/updated/java/jre
  4. Restart the OpenDJ server to use the updated Java runtime environment:

    $ stop-ds --restart
       

Chapter 5. Securing Web Applications

The OpenDJ DSML gateway and OpenDJ REST to LDAP gateway are web applications that run in application servers such as Apache Tomcat or Jetty. In this chapter you will learn to:

  • Find application server documentation for configuring TLS and security settings

  • Review DSML gateway settings to enforce increased security

  • Review REST to LDAP gateway settings to enforce increased security

This chapter does not address security for OpenDJ connection handlers, such as the HTTP connection handler which supports REST to LDAP. Instead, see "Securing Network Connections".

5.1. Finding Application Server Security Documentation

Security settings are covered in the documentation for supported application servers.

The documentation to use depends on the version of the application server. Adapt the following links for the version you use:

Apache Tomcat documentation

For instructions on setting up HTTPS, see SSL/TLS Configuration HOW-TO.

For other security-related settings, see Security Considerations.

The links above are for Tomcat 8.

Jetty documentation

For instructions on setting up HTTPS, see Configuring SSL/TLS.

For other security-related settings, see Configuring Security.

The links above are for the current version of Jetty, which at the time of this writing is Jetty 9.

5.2. DSML Gateway Settings

Make sure the application server protects traffic to the gateway with HTTPS.

In addition, review the following settings:

ldap.port

Use an LDAP port that supports StartTLS or LDAPS.

Using StartTLS or LDAPS is particularly important if the gateway ever sends credentials over LDAP.

ldap.usessl

If ldap.usestarttls is not used, set this to true.

ldap.usestarttls

If ldap.usessl is not used, set this to true.

ldap.trustall

Make sure this is set to false.

ldap.truststore.path

If the Java runtime environment's truststore does not include the appropriate trusted certificates to validate the signature on the LDAP server certificates, set this to a truststore with the appropriate trusted certificates.

For details on importing a trusted certificate, see "Managing Certificates and Private Keys".

ldap.truststore.password

If ldap.truststore.path is set, and the truststore requires a password, set this appropriately.

For details on DSML gateway settings, see "DSML Client Access" in the Administration Guide.

5.3. REST to LDAP Gateway Settings

Make sure the application server protects traffic to the gateway with HTTPS.

In addition, review the following settings in the gateway configuration file, config.json:

security/keyManager

If the LDAP server expects the gateway to supply its certificate for client authentication when setting up TLS, set this to use a keystore with the gateway's certificate and private key.

Also set related properties as necessary.

For details on working with key pairs and setting up keystores, see "Managing Certificates and Private Keys". The information is focused on OpenDJ servers, but you can adapt it for use with the gateway.

security/trustManager

If the Java runtime environment's truststore does not include the appropriate trusted certificates to validate the signature on the LDAP server certificates, set this to use a truststore with the appropriate trusted certificates.

Also set related properties as necessary.

For details on importing a trusted certificate, see "Managing Certificates and Private Keys".

ldapConnectionFactories/bind/connectionSecurity

Use ssl or startTLS.

ldapConnectionFactories/bind/sslCertAlias

If the LDAP server expects the gateway to supply its certificate for client authentication when setting up TLS, set this to the certificate alias used when configuring the keystore for the property security/keyManager.

ldapConnectionFactories/primaryLdapServers/port, ldapConnectionFactories/secondaryLdapServers/port

Use an LDAP port that supports StartTLS or LDAPS.

Using StartTLS or LDAPS is particularly important if the gateway ever sends credentials over LDAP.

authorization/resolver

Check the endpointUrl of the resolver to make sure that OAuth 2.0 tokens are sent over HTTPS.

For details on REST to LDAP gateway settings, see "REST to LDAP Configuration" in the Reference.

Chapter 6. Securing the Server Installation

This chapter explains and demonstrates how to set up an OpenDJ server so as to minimize risk. Apply the suggestions in this chapter when you install an OpenDJ server for testing or production use.

In this chapter you will learn to:

  • Set up a special system account for the OpenDJ server

  • Protect access to server files

  • Enable only directory services that are actually used

  • Use appropriate log configuration

  • Use appropriate global access control settings

  • Use and store passwords appropriately

6.1. Setting Up a System Account for an OpenDJ Server

Do not run an OpenDJ server as the system superuser (root). When applications run as superuser, the system effectively does not control their actions. When running the server as superuser, a bug in the server could affect other applications or the system itself.

After setting up a system account for the server, and using that account only to run the server, you can use system controls to limit user access.

The user running the server must have access to use the configured ports. Make sure you configure the system to let the user access privileged ports such as 389 and 636 if necessary. Make sure you configure the firewall to permit access to the server ports.

The user running the server must have access to all server files, including configuration files, data files, log files, keystores, truststores and their password files, and other files. By default, OpenDJ software lets users in the same group as the user running the server read server files, though not directory data files.

The user running the server does not, however, need access to login from a remote system or to perform actions unrelated to the directory service.

Set up the user account to prevent other users from reading configuration files. On UNIX, set an appropriate umask such as 027 to prevent users in other groups from accessing server files. On Windows, use file access control to do the same. Do consider letting all users to run command-line tools. What a user can do with tools depends on server access control mechanisms. For details, see "Setting Appropriate File Permissions".

You can create a UNIX service script to start the server at system startup and stop the server at system shutdown by using the create-rc-script command. For details see create-rc-script(1) in the Reference.

You can use the windows-service command to register an OpenDJ server as a Windows service. For details, see windows-service(1) in the Reference.

6.2. Protect OpenDJ Server Files

By default, OpenDJ servers do not encrypt server files or directory data. The only attribute values stored in encrypted or digest form are passwords. For instructions on encrypting entries and index content, see "Encrypting Directory Data" in the Administration Guide. For instructions on encrypting change log content, see "To Encrypt External Change Log Data" in the Administration Guide.

If you set up an appropriate user account for the server as described in "Setting Up a System Account for an OpenDJ Server", and unpacked the server files as that user, then the system should prevent other users from having overly permissive access to server files.

Included in the files that the server does not encrypt are LDIF exports of directory data. LDIF export files are readable and writable depending on the UNIX umask or Windows file access control settings for the user who runs the command to export the LDIF. The export-ldif command can compress the LDIF, but does not have an option for encrypting LDIF.

Directory backup archives can be encrypted, but are not encrypted by default. Backup archive file permissions depend on the UNIX umask or Windows file access control settings. When using the backup command, run an online backup and supply the --encrypt option as shown in the following example:

$ backup \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword - \
 --backupAll \
 --backupDirectory /path/to/opendj/bak \
 --encrypt \
 --start 0
Password for user 'cn=Directory Manager':
Backup task <datestamp> scheduled to start...
 

The server uses its Crypto Manager configuration to determine how to encrypt the backup archive data. The --encrypt option is not available for offline back up. If you back up server data offline, plan to protect the files separately.

6.3. Only Enable Necessary Services

By default, an OpenDJ server enables an LDAP connection handler and an administration connector. If the LDAP connection handler is not used, either because only LDAPS is used or because applications access directory data only over HTTPS, then set the LDAP connection handler property to enabled:false by using the dsconfig set-connection-handler-prop command.

Likewise, if you have enabled other connection handlers that are not used, you can also disable them by using the dsconfig command. Use the status command to check which connection handlers are enabled.

6.4. Configure Logging Appropriately

By default, an OpenDJ server writes log messages to files when an error is encountered and when the server is accessed. Access logs tend to be much more intensively updated than error logs. You can also configure debug logging, generally too verbose for continuous use in production, and audit logging, which uses the access log mechanism to record changes. Debug and audit logs are not enabled by default. For details, see "Server Logs" in the Administration Guide.

The default OpenDJ server error log levels and log rotation and retention policies are set to prevent the logs from harming performance or filling up the disk while still making it possible to perform basic troubleshooting. If you must set a more verbose error log level or if you must activate debug logging on a production system for more advanced troubleshooting, be aware that extra logging can negatively impact performance and generate large files on heavily used servers. When finished troubleshooting, reset the log configuration for more conservative logging.

The audit log of an OpenDJ server is not for security audits. Instead it records changes in LDIF. The audit log is intended to help you as server administrator to diagnose problems in the way applications change directory data. For change notification as a service, use the external change log instead. For details about the external change log, see "Change Notification For Your Applications" in the Administration Guide.

6.5. Reconsider Default Global Access Control

Global ACIs or access policies are defined in the server configuration. Global access settings apply together with ACIs in the user data.

You can set up a server to apply the recommendations in this section by using the setup command option, --productionMode.

When you set up a server without using the --productionMode option, default global access control settings allow applications to:

  • Read the root DSE

  • Read server LDAP schema

  • Read directory data anonymously

  • Modify one's own entry

  • Request extended operations and operations with certain controls

For details, see "Default Global ACIs" in the Administration Guide.

If the default global access control settings do not match your requirements, make sure you change them on each server as the server configuration data is not replicated. Global ACIs have the same syntax as ACIs in the directory data. Global access policies are entries in the server configuration. For details about access control settings, see "Configuring Privileges and Access Control" in the Administration Guide.

Default global access control settings can and often do change between releases. Review the release notes when upgrading to a new release. For details, see "Compatibility" in the Release Notes.

Generally it is appropriate to allow anonymous applications to read the root DSE, and to request the StartTLS extended operation over a cleartext connection, even if read access to most directory data requires authorization. The operational attributes on the root DSE indicate the server capabilities, allowing applications to discover interactively how to use the server. The StartTLS extended operation lets an application initiate a secure session starting on a port that does not require encryption.

Authenticated applications should be allowed to read schema operational attributes. LDAP schema operational attributes describe the data stored in the directory. An application that can read schema attributes and check that changes to directory data respect the LDAP schema before sending an update request.

To Minimize Global ACIs

Follow these steps to minimize global ACIs:

  1. Remove existing global ACIs to prevent all access.

    $ dsconfig \
     set-access-control-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --reset global-aci \
     --trustAll \
     --no-prompt
       
  2. Allow limited global access for essential operations.

    This example allows the following limited access:

    • Authenticated users can request the ForgeRock Transaction ID control, which has OID 1.3.6.1.4.1.36733.2.1.5.1.

      Other components in the ForgeRock platform use this control to share transaction IDs for common access logging.

      If you do not use common access logging, you can skip adding the global ACI for Transaction ID control access.

    • Anonymous users can request the Get Symmetric Key extended operation, which has OID 1.3.6.1.4.1.26027.1.6.3, and the StartTLS extended operation, which has OID 1.3.6.1.4.1.1466.20037.

      An OpenDJ server requires Get Symmetric Key extended operation access to create and share secret keys for encryption.

      Directory client applications must be able to use the StartTLS operation to initiate a secure connection with an LDAP connection handler. This must be available to anonymous users so that applications can initiate a secure connection before sending bind credentials to authenticate, for example.

      If the directory deployment does not support StartTLS, then remove || 1.3.6.1.4.1.1466.20037 from the global ACI for Anonymous extended operation access.

    • Anonymous and authenticated users can read information about the LDAP features that OpenDJ servers support according to the global ACI named User-Visible Root DSE Operational Attributes.

      This exposes metadata publicly for the following attributes:

      namingContexts

      The base DNs for user data

      supportedAuthPasswordSchemes

      Supported authPassword storage schemes for pre-encoded passwords

      supportedControl

      Supported LDAP controls by OID

      supportedExtension

      Supported LDAP extended operations by OID

      supportedFeatures

      Supported optional LDAP features by OID

      supportedLDAPVersion

      Supported LDAP versions

      supportedSASLMechanisms

      Supported SASL mechanisms

      supportedTLSCiphers

      Supported cipher suites for transport layer security

      supportedTLSProtocols

      Supported protocols for transport layer security

      vendorName

      Name of the LDAP server implementer

      vendorVersion

      Version of the LDAP server implementation

    $ dsconfig \
     set-access-control-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --add global-aci:"(targetcontrol=\"1.3.6.1.4.1.36733.2.1.5.1\")\
     (version 3.0; acl \"Transaction ID control access\"; allow(read)\
     userdn=\"ldap:///all\";)" \
     --add global-aci:"(extop=\"1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.1466.20037\") \
     (version 3.0; acl \"Anonymous extended operation access\";\
     allow(read) userdn=\"ldap:///anyone\";)" \
     --add global-aci:"(target=\"ldap:///\")(targetscope=\"base\")\
     (targetattr=\"objectClass||namingContexts||supportedAuthPasswordSchemes\
     ||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion\
     ||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||\
     vendorName||vendorVersion\")(version 3.0;\
     acl \"User-Visible Root DSE Operational Attributes\";\
     allow (read,search,compare) userdn=\"ldap:///anyone\";)" \
     --add global-aci:"(target=\"ldap:///cn=schema\")(targetscope=\"base\")\
     (targetattr=\"objectClass||attributeTypes||dITContentRules||dITStructureRules\
     ||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses\")\
     (version 3.0; acl \"User-Visible Schema Operational Attributes\";\
     allow (read,search,compare) userdn=\"ldap:///all\";)" \
     --trustAll \
     --no-prompt
       
  3. Add or update global ACIs as required by known client applications.

    Work with your partners and with client application documentation for details.

    For example, ForgeRock Access Management servers might require access to update schema definitions under cn=schema, and to use the Persistent Search control.

    The following capabilities are useful with the REST to LDAP gateway:

    Access to Read Entry controls

    By default, the OpenDJ REST to LDAP gateway uses the Pre-Read (OID: 1.3.6.1.1.13.1) and Post-Read (OID: 1.3.6.1.1.13.2) controls to read an entry before it is deleted, or to read an entry after it is added or modified.

    To determine whether access to request the controls is required by the deployment, check the configuration for readOnUpdatePolicy as described in "Gateway REST2LDAP Configuration File" in the Reference.

    Access to the Subtree Delete control

    By default, the OpenDJ REST to LDAP gateway uses the LDAP Subtree Delete (OID: 1.2.840.113556.1.4.805) control for delete operations.

    To determine whether access to request the controls is required by the deployment, check the configuration for useSubtreeDelete as described in "Gateway REST2LDAP Configuration File" in the Reference.

    Access to the Permissive Modify control

    By default, the OpenDJ REST to LDAP gateway uses the LDAP Permissive Modify (OID: 1.2.840.113556.1.4.1413) control for LDAP modify operations resulting from patch and update operations.

    To determine whether access to request the controls is required by the deployment, check the configuration for usePermissiveModify as described in "Gateway REST2LDAP Configuration File" in the Reference.

    The following example adds control access for OpenDJ REST to LDAP gateway with a default configuration:

    $ dsconfig \
     set-access-control-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --add global-aci:"(targetcontrol=\"1.3.6.1.1.13.1||1.3.6.1.1.13.2\
     ||1.2.840.113556.1.4.805||1.2.840.113556.1.4.1413\")\
     (version 3.0; acl \"REST to LDAP control access\"; allow(read) userdn=\"ldap:///all\";)" \
     --trustAll \
     --no-prompt
       

6.6. Use Appropriate Password Storage and Password Policies

Make sure you keep passwords secret in production. The server configuration includes files that hold passwords. Command-line tools allow users to provide password credentials. Passwords are also stored in directory data. This section looks at how to protect passwords in each situation.

6.6.1. Passwords in Configuration Files

An OpenDJ server stores passwords in configuration files.

The config.ldif file stores hashes of the passwords for root DN users, such as cn=Directory Manager. Likewise for replicated servers the admin-backend.ldif file stores a password hash for the global administrator, such as cn=admin,cn=Administrators,cn=admin data. By default the password storage algorithm is Salted SHA512, a salted form of the 512-bit SHA-2 message digest algorithm. Permissions on the current copy of the file make it readable and writable only by the user running the server. A backup copy of the version used for the latest successful server startup, config.ldif.startok, can be readable to other users depending on the UNIX umask or Windows access control. Use a storage scheme that protects the passwords in server configuration files.

By default, an OpenDJ server stores passwords for keystores and truststores in configuration files with .pin extensions. These files contain the cleartext, randomly generated passwords. Keep the PIN files readable and writable only by the user running the server. Alternatively, you can use the dsconfig command to configure the server to store keystore and truststore passwords in environment variables or Java properties if your procedures make these methods more secure in production. The settings to change are those of the Key Manager Providers and Trust Manager Providers.

6.6.2. Passwords as Command-Line Arguments

OpenDJ commands supply credentials for any operations that are not anonymous. Password credentials can be supplied as arguments such as the --bindPassword password option shown in many of the examples in the documentation. The passwords for keystores and truststores are handled in the same way. This is not recommended in production as the password appears in the command. Passwords can also be supplied interactively by using a - in the commands, as in --bindPassword -. The following example demonstrates a password supplied interactively:

$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword - \
 --baseDN cn=config \
 "(cn=Directory Manager)" \
 userPassword
Password for user 'cn=Directory Manager':
dn: cn=Directory Manager,cn=Root DNs,cn=config
userPassword: {PBKDF2}10000:<hash>
  

Notice that the password appears neither in the shell history, nor in the terminal session.

When using scripts where the password cannot be supplied interactively, passwords can be read from files. For example, the --bindPasswordFile file option takes a file that should be readable only by the user running the command. It is also possible to set passwords in the tools.properties file for the user. This file is located in the user's home directory, on UNIX ~/.opendj/tools.properties, and on Windows, typically C:\Documents and Settings\username\.opendj\tools.properties, though the location can depend on the Java runtime environment used. Here as well, make sure that the file is readable only by the user. Alternatively use other approaches that work with scripts such as Java properties or environment variables, depending on what method is most secure in production.

6.6.3. Passwords in Directory Data

An OpenDJ server encodes users' passwords before storing them. A variety of built-in password storage schemes are available, using either one-way (hash) or reversible algorithms. The default storage schemes use one-way algorithms to make it computationally difficult to recover the cleartext password values even when given full access to the files containing stored password values.

For details see "Configuring Password Storage".

In an OpenDJ server, password policies govern password storage schemes, valid password values, password term duration, account lockout, and others. For example you can configure password policies that prevent users from setting weak passwords and from reusing passwords. OpenDJ software provides a wide range of alternatives. For details, see "Configuring Password Policy" in the Administration Guide.

6.7. Set Up Servers in Production Mode

OpenDJ server configurations can be hardened for production environments as part of the installation process. When installing the server, use the setup command option, --productionMode.

Setting up a server in hardened production mode leads to the following settings:

  • The default backend database for directory servers, userRoot, uses data confidentiality to encrypt potentially sensitive data on disk.

    As described in "Encrypting Directory Data" in the Administration Guide, if you configure data confidentiality before replication, the destination server's keys disappear when you configure replication. The destination server can no longer decrypt any of its data. (When you initialize replication, a source server initializes a destination server. The dsreplication initialize command references the destination server with its --hostDestination and --portDestination options.)

    When you install multiple directory servers that you will configure as replicas, either import data after installation, or import data for only one replica that you then use to initialize other replicas. In the latter case, leave the database empty for all other replicas.

  • Global access control allows only the following access:

    • Anonymous users can request the StartTLS extended operation, and the Get Symmetric Key extended operation. The Get Symmetric Key extended operation is an OpenDJ-specific operation for internal use. An OpenDJ server requires Get Symmetric Key extended operation access to create and share secret keys for encryption.

    • Anonymous users can read the root DSE operational attributes that describe server capabilities, including among other information, what security protocols and cipher suites the server supports.

    • Authenticated users can read the LDAP directory schema.

    • Authenticated users can request the LDAP Password Modify extended operation, the Who am I? extended operation, and the Cancel extended operation.

    • Authenticated users can request the Pre-Read and Post-Read controls, the Subtree Delete control, and the Permissive Modify control. These controls are used by the REST to LDAP gateway.

      Authenticated users can also request the ForgeRock Transaction ID control. This is a ForgeRock-specific control for internal use that permits transmission of transaction IDs through platform components for use as a key to correlation of Common Audit events.

    For a longer explanation of these settings, see "Reconsider Default Global Access Control".

  • The protocol version and cipher suites for securing connections are restricted to those using strong encryption.

    The protocol version is restricted to TLSv1.2.

    The cipher suites used when negotiating a secure connection call for a server certificate using an elliptic curve (EC) key algorithm or an RSA key algorithm. If you provide your own keystore when setting up the server in production mode, make sure that the certificate key algorithm is EC or RSA. Otherwise the server will not be able to negotiate secure connections. For details and examples, see "To Restrict Protocols and Cipher Suites".

  • The Crypto Manager requires encrypted communication between servers.

    The Crypto Manager is described in "Cryptographic Key Management".

  • The anonymous HTTP authorization mechanism for REST access is disabled.

    As a result, REST access does not permit anonymous requests.

  • OpenDJ native file-based access loggers and the replication error logger have UNIX/Linux file permissions set to 600 (only the server account has read-write access to log files). This setting does not affect Common Audit loggers, such as the JSON file-based audit loggers.

    Adjust system settings to ensure appropriate access to files. For additional information and recommendations on setting the UNIX/Linux umask appropriately and on setting ACLs on Windows systems, see "Setting Appropriate File Permissions".

  • The random password generator generates 10-character alphanumeric passwords.

  • The default password policy for normal users requires passwords at least 8 characters in length, and prevents use of common passwords.

    The default password policy for root DN users requires passwords at least 8 characters in length, prevents use of common passwords, and requires that authentication be secure to avoid exposing credentials over the network.

  • The CRAM-MD5 and DIGEST-MD5 SASL mechanisms are disabled.

Chapter 7. Managing Certificates and Private Keys

Encryption makes it possible to protect sensitive data. ForgeRock Directory Services software depends on encryption to negotiate secure network connections, and to keep directory data confidential. Encryption in turn depends on keys. This chapter covers the OpenDJ server features for managing keys.

In this chapter you will learn:

  • How an OpenDJ server uses encryption keys

  • Where keys are stored

  • How an OpenDJ server gets access to keys

  • How an OpenDJ server distributes secret keys for data confidentiality

  • How to prepare keys for secure communications

  • How to store keys in key store files

  • How to store keys in cryptographic devices, such as HSMs

  • How to restrict protocols and cipher suites to enforce better security

Keys can be revoked, and lists of revoked keys can be stored in a directory. The Java runtime environment performs certificate validation as described in "How Keys are Used". For more information about revocation, see "Client Certificate Validation and the Directory".

Once keys are properly stored and managed, you can use them to secure network connections. For details, see "Securing Network Connections".

7.1. About Certificates, Private Keys, and Secret Keys

This section describes how keys are used, stored, accessed, and distributed by an OpenDJ server.

7.1.1. How Keys are Used

This section describes the following:

  • Types of keys and their uses

  • Infrastructure for using public/private key pairs, and how public key ownership is verified

  • How OpenDJ software uses public key certificates

7.1.1.1. Types of Keys

OpenDJ software uses two kinds of keys:

  • Symmetric keys (also known as secret keys)

  • Asymmetric key pairs (public/private key pairs)

These are compared in "Symmetric and Asymmetric Keys".

Symmetric and Asymmetric Keys

Symmetric (Secret) Keys

Asymmetric Key Pairs

Content

Single key, such as a random array of bits

Pair of keys, one public, the other private

Encryption

A single key serves to encrypt and to decrypt.

Data encrypted with a public key can only be decrypted with the private key, and vice versa.

Generation

Easier to generate, can be a random array of bits

Harder to generate a matched pair of keys

Speed

Faster

Slower

Distribution

Must be kept secret.

Each party must have a copy.

Secure channels must be established to exchange secret keys.

Public key can be shared with any party.

Private key must be kept secret by owner.

No secure channel is required to distribute public keys.

Proving that a public key is valid and belongs to the issuer requires a trust network, such as a public key infrastructure (PKI) as described in "Public Key Infrastructure (PKI)".

Uses

Encrypting shared data

OpenDJ servers use secret keys for data confidentiality, and for encrypted backup files.

  • Public key encryption: Encrypt a message with a public key; only the private key owner can decrypt the message.

  • Digital signatures: Sign a message with the private key; any party can verify the signature with the public key.

OpenDJ software uses public/private key pairs to establish secure connections. OpenDJ servers can use public keys to authenticate clients.


7.1.1.2. Public Key Infrastructure (PKI)

A PKI is a set of procedures, roles, and policies required to provide encryption and authentication when using TLS. A PKI makes it possible to trust that a public key belongs to its owner by enabling the following steps:

  1. A party wanting to use public key cryptography generates a key pair with a public key to share with others and a private key to keep secret.

    This party is called the public key owner.

  2. The public key owner sends their public key in a certificate signing request to a certificate authority (CA), or self-signs the certificate.

    The object of a certificate signing request, a public key certificate, is a digital document that proves ownership of the public key as long as its signer's signature can be trusted. The certificate includes the public key and information about it, such as when it is valid and who the owner is, and the digital signature of the issuer (the CA, or the owner themselves for a self-signed certificate).

    In a PKI, a CA is a third party that other parties trust to issued signed certificates to public key owners. As long as the CA can be trusted, the signed certificate proves ownership of the public key. The CA can be trusted because each party has a trusted copy of its signing certificate, or a trusted copy of a certificate used to sign the CA's certificate.

  3. After verifying that the public key does belong to its owner, the issuer digitally signs the owner's certificate, and issues the signed certificate to the owner.

  4. The owner now shares its certificate for public key encryption and signature verification.

  5. Another party wanting to use the certificate must check that the certificate is valid.

    Certificate verification can involve checking a number of things:

    • Whether the current time is in the range of the validity dates.

    • Whether the owner's identifier in the certificate matches some externally verifiable attribute of the owner's, such as the DNS record of the host FQDN or the owner's email address.

    • Whether the issuer signature is a valid signature by a trusted party.

      The owner's certificate is not necessarily directly signed by a trusted CA. Instead, there can be a certificate chain to verify. For example, a CA issued a signing certificate to an intermediary, and the intermediary signed the owner's certificate. Trust can be established for the certificate chain by verifying the intermediary's signature on the owner's certificate, and verifying the CA's signature on the intermediary's certificate.

  6. Ultimately, the chain of verification must:

    • End by determining that the issuer's signature is valid and trusted, proving that the certificate does belong to its owner.

    • Fail at some point, in which case the signature cannot be trusted.

      This does not mean that the certificate is invalid. It does mean, however, that the party who wants to use the public key cannot be certain that it belongs to the owner, and so cannot trust the public key.

      This can happen when the party trying to use the public key does not have a means to trust the issuer who signed the certificate, perhaps because it has no trusted copy of the issuer's certificate. For example, if the certificate is self-signed, but has not been added to the party's truststore, then the signature cannot be trusted.

7.1.1.3. How Certificates are Used

Secure connections between the server and client applications are based on TLS. TLS depends on the use of digital certificates. By default, OpenDJ servers present their certificates to clients to prove their identities as part of the process of establishing a secure connection.

When presented with a certificate, both the OpenDJ server and client applications check that the certificate was signed by a trusted party before accepting it. If either the OpenDJ server or the client application cannot trust the peer certificate, then the attempt to set up a secure connection will fail.

By default, OpenDJ client tools prompt you if they do not recognize the server certificate. Other clients might not prompt you. An OpenDJ server has no one to prompt when a client presents a certificate, so it refuses to set up the connection if it cannot trust the certificate. (Unless you use the Blind Trust Manager Provider, which is recommended only for test purposes.) Because prompting a user to examine and accept a certificate works only for some tools and only in interactive sessions, client applications must be able to verify that OpenDJ directory certificates were signed by a trusted party without user interaction.

By default, an OpenDJ server does not expect client applications to present a certificate when negotiating a secure connection. It is possible and recommended for some applications, however, to require mutual authentication, where the client presents its certificate, too. If a client application presents a certificate, but an OpenDJ server does not recognize the certificate, it rejects the attempt to establish a secure connection.

In practice, this means that an OpenDJ server and client applications must have truststores to verify that they can trust a certificate. The truststores hold trusted certificates. When a peer presents a valid certificate that either matches or was signed by a trusted certificate, then that certificate can be trusted.

Conventionally, certificates are signed by a CA, and the CA certificate is kept in the truststore. The Java runtime environment, for example, has a default truststore holding certificates from many well-known CAs. When an application presents a valid certificate signed by a trusted CA, the application receiving the certificate can verify the certificate locally. If you set up a connection handler with a valid certificate signed by a well-known CA, then many client applications can verify the certificate without further configuration, and proceed to establish a secure connection.

Note

$JAVA_HOME/jre/lib/security/cacerts holds the CA certificates. To read the full list, use the following command:

$ keytool \
 -list \
 -v \
 -keystore $JAVA_HOME/jre/lib/security/cacerts \
 -storepass changeit
    

In summary, if you need a certificate to be recognized automatically, get the certificate signed by a well-known CA. This is the case in production environments where clients contact the service directly and where the list of clients is not known in advance.

Alternatively, you can choose to sign certificates in other ways:

  • Set up your own CA.

  • Use a CA whose signing certificate is not widely distributed.

  • Use self-signed certificates.

In each case, you must add the signing certificates into the truststore of each peer making secure connections.

OpenDJ servers can import CA-signed certificates as part of the installation process, or later using command-line tools as described in "Setting Up Server Certificates". Alternatively, the installation program prepares a self-signed certificate. In addition, you can add a signing certificate to the OpenDJ server truststore using the Java keytool command.

7.1.2. How Keys are Stored and Accessed

OpenDJ servers do not store asymmetric keys and symmetric keys in the same way.

7.1.2.1. How Asymmetric Keys are Stored and Accessed

OpenDJ software stores asymmetric key pairs in keystores, and trusted certificates in truststores. In the OpenDJ server configuration, keystores are referenced by key manager providers. (Except for some ForgeRock Common Audit event handlers that manage their own keystores.) Truststores are referenced by trust manager providers. Components that need access to keys reference key manager providers for their certificates and private keys, and trust manager providers for trusted certificates. This enables, but does not require, reuse as shown in "Asymmetric Key Storage".

Asymmetric Key Storage
Asymmetric Key Storage

Keys used to communicate with clients and other services are stored by default in the files config/keystore and config/truststore. Keys used for directory administration and data replication are stored by default in other files.

OpenDJ server uses one keystore for key pairs to secure adminstration and client connections, and a separate keystore for replication, as shown in "Keystores and Truststores".

Keystores and Truststores
Keystores and Truststores

By default, keystores are found under /path/to/opendj/config:

  • The keystore file holds keys for securing administrative and client connections.

    The key pair for the server has default alias server-cert.

    The cleartext password is stored in keystore.pin. It is also the private key password for server-cert.

    This is where you import trusted certificates for external applications.

  • The ads-truststore file holds the server's key pair for securing replication connections, and other replicas' public key certificates.

    The key pair for the server has default alias ads-certificate.

    The cleartext password is stored in ads-truststore.pin. It is also the private key password for ads-certificate.

    This keystore is synchronized with the certificates under the base DN cn=admin data. Do not change this keystore directly unless you understand the impact on the server configuration.

7.1.2.2. How Symmetric Keys are Stored and Accessed

Symmetric keys, used for features such as data confidentiality and encrypted backup, are managed through the OpenDJ Crypto Manager described in "About Security Features". The Crypto Manager generates symmetric keys when necessary, such as the first time data must be encrypted. It stores symmetric keys under cn=secret keys,cn=admin data, keeping them secret by encrypting them for each server using the server's public key.

7.1.3. How Secret Keys are Distributed

As mentioned in "How Keys are Stored and Accessed", the OpenDJ Crypto Manager stores symmetric keys under cn=secret keys,cn=admin data. As the cn=admin data suffix is replicated, all replicas in the topology have access to the data.

The following LDIF shows an edited example entry for a secret key:

dn: ds-cfg-key-id=<key-id>,cn=secret keys,cn=admin data
objectClass: top
objectClass: ds-cfg-cipher-key
ds-cfg-symmetric-key: <local-server-key-id>:<metadata>:<base64-encoded-encrypted-key>
ds-cfg-symmetric-key: <remote-server-key-id>:<metadata>:<base64-encoded-encrypted-key>
ds-cfg-key-id: <key-id>
  

Notice these features of the entry:

  • The secret key is identified by a key-id.

    This secret key ID is the same on different replicas.

  • The symmetric key is stored encrypted on ds-cfg-symmetric-key.

    The attribute has one value for each replica in the topology.

  • The ds-cfg-symmetric-key attribute values have the following parts:

    *-server-key-id

    This references the public key used to encrypt the value.

    The entry referenced is under cn=instance keys,cn=admin data.

    Each server has entries for other replicas, and can trust their public keys. Each server of course has only its own private key, and needs to be able to determine which ds-cfg-symmetric-key value it can decode to obtain the secret key.

    metadata

    Specifies the mechanism used to encrypt the secret key.

    base64-encoded-encrypted-key

    Holds the base64-encoded representation of the secret key that has been encrypted with the public key for the server, identified by the *-server-key-id.

  • Other attributes, not shown here, define the encryption mechanism.

When a server needs a secret key, it makes a request to the Crypto Manager. If the secret key already exists, the Crypto Manager finds it and returns it. If not, the Crypto Manager generates a secret key and stores the information about it under cn=admin data. Then it returns the secret key.

In this way, data replication distributes the secret key. The Crypto Manager ensures that the distribution is secure.

7.2. Preparing For Secure Communications

This section shows how to prepare the server to use a file-based keystore to manage the keys essential to secure communications. For more information about the keys, see "About Certificates, Private Keys, and Secret Keys".

7.2.1. Importing Certificates

A client that sets up a secure connection with a server must be able to trust the server certificate. A server that uses mutual authentication (checking the client certificate) must be able to trust the client certificate. In either case, this involves finding the signing certificate in a keystore or a truststore.

In some cases, an OpenDJ server acts as a client of external services. For example, REST to LDAP can resolve OAuth 2.0 tokens by sending secure requests to an authorization server. The server can also connect to another LDAP server when using pass-through authentication.

The default Java truststore contains signing certificates from well-known CAs. If the CA certificate is not in the default truststore, or the certificate is self-signed, then you can import it into the server or client keystore as described here.

To Import a Trusted Client Certificate

The following steps demonstrate using the keytool command to add a client application's binary format, self-signed certificate to the OpenDJ server keystore. This enables the OpenDJ server to recognize the self-signed client application certificate.

  1. Import the client certificate:

    $ keytool \
     -import \
     -alias myapp-cert \
     -file myapp-cert.pem \
     -keystore /path/to/opendj/config/keystore \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -storetype PKCS12 \
     -noprompt
    Certificate was added to keystore
        
  2. Restart the server.

    This forces the server to read the updated truststore file:

    $ stop-ds --restart --quiet
        
To Import the Server Certificate

If your client uses a Java truststore, import the OpenDJ server signing certificate using the keytool command.

  1. Export the server certificate from the server keystore.

    The following example shows the keytool command to export the self-signed server certificate in binary format. Notice that the keystore PIN is stored in a file, which is the default setting:

    $ keytool \
     -export \
     -rfc \
     -alias server-cert \
     -file server-cert.pem \
     -keystore /path/to/opendj/config/keystore \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -storetype PKCS12
    Certificate stored in file <server-cert.pem>
        
  2. Import the server certificate into the client truststore:

    $ keytool \
     -import \
     -trustcacerts \
     -alias server-cert \
     -file server-cert.pem \
     -keystore my-keystore \
     -storetype PKCS12 \
     -storepass changeit \
     -noprompt
    Certificate was added to keystore
        
To Import a Trusted CA Certificate

If you use self-signed certificates, or if your CA is not well-known, you can nevertheless import the certificate as a CA certificate into a Java file-based truststore using the keytool command. The application that relies on the truststore can then trust the certificate in the same way it trusts well-known CA certificates.

  • Import the certificate as a CA certificate:

    $ keytool \
     -import \
     -trustcacerts \
     -alias ca-cert \
     -file ca.crt \
     -keystore /path/to/opendj/config/keystore \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -storetype PKCS12 \
     -noprompt
    Certificate was added to keystore
        

7.2.2. Setting Up Server Certificates

When you install the OpenDJ server, you can choose to configure secure connections and either generate a key pair with a self-signed certificate, or import your own keystore. The default PKCS#12 keystore is /path/to/opendj/config/keystore, and the self-signed public key certificate has the alias server-cert. The password for the keystore and the private key is stored in cleartext in the file /path/to/opendj/config/keystore.pin.

If you chose to set up a secure connection as part of the installation process, you can skip this section.

To Set Up a CA-Signed Certificate

This procedure shows how to prepare a new key pair with a CA-signed certificate for use in setting up secure connections.

The high-level steps to perform are the following:

  • Generate a server private key and public key certificate in your keystore.

  • Issue a signing request to the CA, who responds with a CA-signed certificate.

  • Import the CA-signed certificate where appropriate.

  • Set up a key manager provider to use the keystore.

A detailed example follows:

  1. Prepare the password for the keystore.

    By default, an OpenDJ server is configured to hold the password in a file, /path/to/opendj/config/keystore.pin:

    $ touch /path/to/opendj/config/keystore.pin
    $ chmod 600 /path/to/opendj/config/keystore.pin
    # Add keystore and private key password in cleartext on a single line:
    $ vi /path/to/opendj/config/keystore.pin
        
  2. Generate the server key pair (private key and public key certificate) using the Java keytool command.

    One step in verifying the certificate's validity is checking that the subject's FQDN matches the FQDN obtained from DNS.

    The FQDN for the OpenDJ server, visible in the status command output, and under Server Details in the OpenDJ control panel, is set both as a DNSName in the certificate's SubjectAlternativeName list, and also in the CN of the certificate's subject name DN for backwards compatibility:

    $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
        

    Note

    Notice that the -storepass and -keypass options take identical password arguments. An OpenDJ server uses the same password to protect the keystore and the private key.

    If the server can respond on multiple FQDNs, then specify multiple subject alternative names when using the keytool command's -ext option. In the following example the primary FQDN is opendj.example.com and the alternative is ldap.example.com:

    $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com,dns:ldap.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
        

    For an example showing how to use a wildcard certificate, see "To Set Up a Key Pair With a Wildcard Certificate".

  3. Create a certificate signing request file for the generated certificate:

    $ keytool \
     -certreq \
     -alias server-cert \
     -file server-cert.csr \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin
        
  4. Have the CA sign the request (server-cert.csr).

    See the instructions from your CA on how to provide the request.

    The CA returns the signed certificate.

  5. (Optional) If you have set up your own CA and signed the certificate, or are using a CA whose signing certificate is not included in the Java runtime environment, import the CA certificate into the keystore so that it can be trusted.

    Otherwise, when you import the signed certificate from an (unknown) CA, the keytool command fails to import the signed certificate with the message keytool error: java.lang.Exception: Failed to establish chain from reply.

    For an example command, see "To Import a Trusted CA Certificate".

  6. Import the signed certificate from the CA reply into the keystore where you generated the server certificate.

    In this example the certificate from the reply is server-cert.crt:

    $ keytool \
     -import \
     -alias server-cert \
     -file server-cert.crt \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin \
     -noprompt
        
  7. Configure the file-based key manager provider for the keystore that you set up with the keytool command:

    $ dsconfig \
     set-key-manager-provider-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --provider-name "Default Key Manager" \
     --set enabled:true \
     --trustAll \
     --no-prompt
        

    If you stored the keystore password somewhere besides the file, /path/to/opendj/config/keystore.pin, shown in the examples in this procedure, also adjust the key-store-* settings accordingly.

    At this point, the OpenDJ server can use the CA-signed certificate.

  8. If you use a CA certificate that is not known to clients, such as a CA that you set up yourself rather than a well-known CA, import the CA certificate into the client application truststore. For an example command, see "To Import a Trusted CA Certificate".

    Otherwise the client application cannot trust the signature on the server certificate.

To Set Up a Self-Signed Certificate

This procedure shows how to prepare a new key pair with a self-signed certificate for use in setting up secure connections.

The high-level steps to perform are the following:

  • Generate a server private key and public key certificate in your keystore.

  • Self-sign the certificate.

  • Set up a key manager provider to use the keystore.

To replace the existing server key pair with a self-signed certificate and new private key, first, use keytool -delete -alias server-cert to delete the existing keys, then generate a new key pair with the same alias. Either reuse the existing password in keystore.pin, or use a new password as shown in the steps below.

  1. Prepare the password for the keystore.

    By default, an OpenDJ server is configured to hold the password in a file, /path/to/opendj/config/keystore.pin:

    $ touch /path/to/opendj/config/keystore.pin
    $ chmod 600 /path/to/opendj/config/keystore.pin
    # Add keystore and private key password in cleartext on a single line:
    $ vi /path/to/opendj/config/keystore.pin
        
  2. Generate the key pair using the Java keytool command:

    $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
        

    In this example, the OpenDJ server runs on a system with FQDN opendj.example.com. The keystore is created in the OpenDJ config directory.

    Note

    Notice that the -storepass and -keypass options take identical password arguments. An OpenDJ server uses the same password to protect the keystore and the private key.

    If the server can respond on multiple FQDNs, then specify multiple subject alternative names when using the keytool command's -ext option. In the following example the primary FQDN is opendj.example.com and the alternative is ldap.example.com:

    $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com,dns:ldap.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
        

    For an example showing how to use a wildcard certificate, see "To Set Up a Key Pair With a Wildcard Certificate".

  3. Self-sign the server certificate:

    $ keytool \
     -selfcert \
     -alias server-cert \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin
        
  4. Configure the file-based key manager provider to access the keystore with keystore/private key password.

    In this example, the alias is server-cert and the password is in the file, /path/to/opendj/config/keystore.pin.

    If you are replacing a key pair with a self-signed certificate, reusing the server-cert alias and password stored in keystore.pin, then you can skip this step:

    $ dsconfig \
     set-key-manager-provider-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --provider-name "Default Key Manager" \
     --set enabled:true \
     --trustAll \
     --no-prompt
        

    If you stored the keystore password somewhere besides the file, /path/to/opendj/config/keystore.pin, shown in the examples in this procedure, also adjust the key-store-* settings accordingly.

    At this point, the OpenDJ server can use the self-signed certificate, for example, for StartTLS and LDAPS or HTTPS connection handlers.

To Use an Alternative Keystore Implementation

To use an alternative keystore implementation, start with a different keystore type when generating the keypair:

  1. Use one of the keystore types supported by the Java runtime environment:

    Java Keystore

    The basic Java keystore type is JKS:

    $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore.jks \
     -storetype JKS \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
           

    This is the keystore type if you do not specify a -storetype option.

    Java Cryptography Extension Keystore

    The JCEKS type lets you take advantage of additional Java cryptography extensions and stronger protection for private keys:

     $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore.jceks \
     -storetype JCEKS \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
           
    LDAP Keystore

    OpenDJ directory servers implement an OpenDJ security provider for LDAP and LDIF-based keystore services. Its keystore type is LDAP.

    For details, see "Using an LDAP Keystore".

    PKCS#11 device

    A PKCS#11 device, such as an HSM, can be used as a keystore.

    For details, see "Using a Hardware Security Module".

    PKCS#12 Keystore

    The PKCS12 type lets you use a PKCS#12 format file. This is the default for OpenDJ servers. It is a standard format and is interoperable with other systems that do not necessarily depend on a Java runtime environment:

     $ keytool \
     -genkeypair \
     -alias server-cert \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
           
  2. After using an alternate keystore type, make sure that you set up:

    • The key manager provider to open the correct keystore with the correct credentials.

      Any components using that key manager provider to use the correct certificate alias.

7.2.3. Working With Test Key Pairs

This section includes procedures for working with test key pairs. The procedures use the openssl command to perform actions that are not necessarily possible with the Java keytool command. OpenSSL software is available from https://www.openssl.org/.

Important

OpenSSL software is independent from and not associated with the OpenDJ project. The examples shown in this section might not work with your version of OpenSSL. See the openssl documentation for your version.

Examples in this section were originally written with OpenSSL version 1.0.2.

To Set Up a CA Signing Certificate

Follow these steps to set up a CA key pair with a signing certificate:

  1. Generate a private key for the CA:

    $ openssl \
     genpkey \
     -algorithm RSA \
     -out ca.key \
     -pkeyopt rsa_keygen_bits:4096
        
  2. Self-sign a corresponding certificate:

    $ openssl \
     req \
     -new \
     -x509 \
     -days 7300 \
     -subj "/C=FR/O=Example Corp/CN=example.com" \
     -key ca.key \
     -out ca.crt
        

    The signing certificate is ca.crt, and it corresponds to the private key ca.key.

To Sign a Certificate Signing Request

Follow these steps to use a CA signing certificate to sign a certificate signing request (CSR):

  1. If you have not already done so, set up a CA key pair as described in "To Set Up a CA Signing Certificate".

  2. Obtain a CSR file for the certificate to sign.

  3. Create a signed certificate from the CSR.

    The following example preserves the SAN for a server certificate generated using the keytool command and the -ext "san=dns:opendj.example.com" option:

    $ openssl \
     x509 \
     -req \
     -in server-cert.csr \
     -CA ca.crt \
     -CAkey ca.key \
     -CAcreateserial \
     -extfile \
      <(cat /etc/ssl/openssl.cnf \
      <(printf "[SAN]\nsubjectAltName=DNS:opendj.example.com")) \
     -extensions SAN \
     -out server-cert.crt
        

    The following example preserves the SAN for a wildcard certificate as described in "To Set Up a Key Pair With a Wildcard Certificate":

    $ openssl \
     x509 \
     -req \
     -in example.com.csr \
     -CA ca.crt \
     -CAkey ca.key \
     -CAcreateserial \
     -extfile \
      <(cat /etc/ssl/openssl.cnf \
      <(printf "[SAN]\nsubjectAltName=DNS:*.example.com")) \
     -extensions SAN \
     -out example.com.crt
        

    In both examples, the certificates to return to the requestors are the .crt files.

To Set Up a Key Pair With a Wildcard Certificate

A wildcard certificate uses a * to replace the top-level subdomain in the subject FQDN, and can list domains in the subject alternative domain list.

The FQDN for an OpenDJ server, visible in the status command output, and under Server Details in the OpenDJ control panel, must also match a DNSName value or pattern in the certificate's SubjectAlternativeName list.

Follow these steps to set up a key pair with a wildcard certificate:

  1. Generate a private key:

    $ openssl \
     genpkey \
     -algorithm RSA \
     -pkeyopt rsa_keygen_bits:2048 \
     -out example.com.key
        
  2. Generate a certificate signing request for the CA:

    $ openssl \
     req \
     -new \
     -sha256 \
     -key example.com.key \
     -subj "/C=FR/O=Example Corp/CN=*.example.com" \
     -reqexts SAN \
     -config \
      <(cat /etc/ssl/openssl.cnf \
      <(printf "[SAN]\nsubjectAltName=DNS:*.example.com")) \
     -out example.com.csr
        
  3. Get the CA to sign the request and return the certificate.

    For an example of how to do this yourself, see "To Sign a Certificate Signing Request".

  4. (Optional) Convert the results into a PKCS#12 format Java keystore file.

    $ openssl \
     pkcs12 \
     -export \
     -in example.com.crt \
     -inkey example.com.key \
     -name server-cert \
     -CAfile ca.crt \
     -password file:/path/to/opendj/config/keystore.pin \
     -out /path/to/opendj/config/keystore
        

    This keystore can be used for testing the wildcard certificate with an OpenDJ server as in the following example:

    $ ldapsearch \
     --port 1636 \
     --hostname opendj.example.com \
     --baseDN dc=example,dc=com \
     --useSSL \
     "(uid=bjensen)" \
     cn
    The server is using the following certificate:
        Subject DN:  CN=*.example.com, O=Example Corp, C=FR
        Issuer DN:  CN=example.com, O=Example Corp, C=FR
        Validity:  <validity-dates>
    Do you wish to trust this certificate and continue connecting to the server?
    Please enter "yes" or "no":yes
    dn: uid=bjensen,ou=People,dc=example,dc=com
    cn: Barbara Jensen
    cn: Babs Jensen
        

7.3. Using an LDAP Keystore

OpenDJ servers implement an OpenDJ security provider for LDAP and LDIF-based keystore services. Its keystore type is LDAP. This section demonstrates how to work with an LDAP keystore.

Interface Stability: Evolving

An LDAP keystore can store trusted certificates, private keys, and secret keys. It stores key entries in the directory under a base DN that you specify. It protects private and secret keys by encrypting them with the keystore password.

You can store keys in a database backend or in an LDIF file. By storing keys in a database backend, you can take advantage of data replication to distribute the keys securely to all replicas. LDIF storage can be useful for testing purposes.

You can access an LDAP keystore using the Java keytool command, and using similar tools that work with Java keystores. The tool must have access to the security provider implementation in the server libraries, and to a configuration file for connecting to the LDAP or LDIF storage.

LDAP Keystore Base DN

The following command adds a base DN for an LDAP keystore:

$ cat keystore.ldif
dn: ou=keystore,dc=example,dc=com
objectClass: organizationalUnit
objectClass: top
aci: (target = "ldap:///ou=keystore,dc=example,dc=com")(targetattr = "*")
 (version 3.0;acl "Cleartext LDAP to keystore only on localhost";
 deny(all)(ip != "127.0.0.1" and ssf <= "1");)
description: LDAP keystore
ou: keystore

$ ldapmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 keystore.ldif
  

LDAP Keystore Configuration Files

External tools that access an LDAP keystore require a configuration file.

If the LDAP keystore stores keys in the directory, the tools require a configuration file such as the following:

# Configuration file for LDAP keystore using the directory
org.forgerock.opendj.security.keyStoreBaseDn=ou=keystore,dc=example,dc=com
org.forgerock.opendj.security.host=localhost
org.forgerock.opendj.security.port=1389
org.forgerock.opendj.security.bindDn=cn=Directory Manager
org.forgerock.opendj.security.bindPassword=password

The keyStoreBaseDn must exist before it is used. See "LDAP Keystore Base DN".

If the LDAP keystore is backed by an LDIF file, the configuration file must specify the file to use:

# Configuration file for LDAP keystore using LDIF
org.forgerock.opendj.security.ldif=/path/to/keystore.ldif
org.forgerock.opendj.security.keyStoreBaseDn=ou=keystore,dc=example,dc=com
  

LDAP Keystore PIN

The following example sets up a PIN for an LDAP keystore:

$ touch /path/to/opendj/config/ldap.pin
$ chmod 600 /path/to/opendj/config/ldap.pin
# Add a password in cleartext on a single line:
$ vi /path/to/opendj/config/ldap.pin
  

LDAP Keystore: Generate Key Pair

The following example generates a public-private key pair in the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN".

$ keytool \
 -genkeypair \
 -alias "private-key" \
 -ext "san=dns:opendj.example.com" \
 -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin
  

LDAP Keystore: Generate Certificate Signing Request

The following example generates a certificate signing request for a private key in the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN".

$ keytool \
 -certreq \
 -alias "private-key" \
 -file private-key.csr \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin
  

For examples showing how to import a certificate in response from the CA, see "LDAP Keystore: Import Trusted Certificate".


LDAP Keystore: Self-Sign a Private Key

The following example self signs a public key certificate associated with a private key in the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN".

$ keytool \
 -selfcert \
 -alias "private-key" \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin
  

LDAP Keystore: Generate Secret Key

The following example generates an AES secret key in the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN".

$ keytool \
 -genseckey \
 -alias "secret-key" \
 -keyalg AES \
 -keysize 256 \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin
  

LDAP Keystore: Import Trusted Certificate

The following examples import trusted certificates into the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN".

The following example imports a certificate in binary format:

$ keytool \
 -importcert \
 -alias "trusted-cert" \
 -file cert.crt \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin \
 -noprompt
Certificate was added to keystore
  

The following example imports a certificate in PEM format. The only difference compared to the previous command is the certificate file name:

$ keytool \
 -importcert \
 -alias "trusted-cert" \
 -file cert.pem \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin \
 -noprompt
Certificate was added to keystore
  

LDAP Keystore: List Contents

The following example lists the contents of the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN":

$ keytool \
 -list \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin \
 -noprompt
Keystore type: LDAP
Keystore provider: OpenDJ

Your keystore contains 3 entries

private-key, <date>, PrivateKeyEntry,
...
secret-key, <date>, SecretKeyEntry,
trusted-cert, <date>, trustedCertEntry,
...
  

LDAP Keystore: Delete Key

The following example deletes a key from the LDAP keystore.

Notice the classpath settings (with -J) that require access to the server libraries, the reference to a configuration file as described in "LDAP Keystore Configuration Files", and the PIN file created as in "LDAP Keystore PIN":

$ keytool \
 -delete \
 -alias "trusted-cert" \
 -J-cp -J/path/to/opendj/lib/bootstrap-client.jar \
 -providerName OpenDJ \
 -providerClass org.forgerock.opendj.security.OpenDjSecurityProvider \
 -providerArg keystore.conf \
 -storetype LDAP \
 -keystore NONE \
 -storepass:file /path/to/opendj/config/ldap.pin \
 -keypass:file /path/to/opendj/config/ldap.pin \
 -noprompt
  

LDAP Keystore: Create Key Manager Provider

The following example creates a key manager provider for the LDAP keystore:

$ dsconfig \
 create-key-manager-provider \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --provider-name LDAP \
 --type ldap \
 --set enabled:true \
 --set base-dn:ou=keystore,dc=example,dc=com \
 --set key-store-pin-file:/path/to/opendj/config/ldap.pin \
 --trustAll \
 --no-prompt
  

You can reference this key manager provider in connection handler configurations, as shown in the following example:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "LDAPS Connection Handler" \
 --set key-manager-provider:LDAP \
 --set ssl-cert-nickname:private-key \
 --trustAll \
 --no-prompt
  

LDAP Keystore: Create Trust Manager Provider

The following example creates a trust manager provider for the LDAP keystore:

$ dsconfig \
 create-trust-manager-provider \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --provider-name LDAP \
 --type ldap \
 --set enabled:true \
 --set base-dn:ou=keystore,dc=example,dc=com \
 --set trust-store-pin-file:/path/to/opendj/config/ldap.pin \
 --trustAll \
 --no-prompt
  

You can reference this trust manager provider in connection handler configurations, as shown in the following example:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "LDAPS Connection Handler" \
 --set trust-manager-provider:LDAP \
 --trustAll \
 --no-prompt
  

7.4. Using a Hardware Security Module

This section demonstrates how to use a PKCS#11 device, such as a hardware security module (HSM), to store the keys used to secure communications.

OpenDJ servers support key management using a PKCS#11 token store. The PKCS#11 standard defines a cryptographic token interface, a platform-independent API for storing keys in an HSM, for example. HSMs logically and physically protect keys. HSMs can perform cryptographic calculations with the keys, potentially offloading the CPU for this purpose, but also preventing the keys from being accessible to other processes on the system.

Note

An OpenDJ server uses a PKCS#11 keystore to hold PKI key pairs, which are asymmetric keys used to set up secure connections. The OpenDJ Crypto Manager, described in "About Security Features", does not store symmetric keys on a PKCS#11 device. In other words, generated symmetric keys used for encryption and decryption of backup data and confidential data cannot be stored in an HSM.

Using a PKCS#11 device for storing OpenDJ keys involves:

  • Storing the keys on the PKCS#11 device.

    How you store keys in a device such as an HSM depends on the device. For details, see the documentation for your device.

  • Creating an OpenDJ PKCS11 key manager provider to access the device.

    An OpenDJ server accesses a PKCS#11 device using a PIN, which can be provided in the server configuration, in a separate file, or as the value of an environment variable or Java system property. The PIN must be stored as a cleartext value, so take care to protect it in production environments.

  • Configuring other components to use the key manager provider.

    For example, OpenDJ connection handlers and OAuth 2.0 authorization mechanisms requiring SSL mutual authentication can reference the key manager provider in their configurations.

This section demonstrates how to use the SoftHSM PKCS#11 software device for evaluation, development, and testing.

To Prepare an HSM Simulator

This procedure explains how to prepare the SoftHSM PKCS#11 software device for development and testing.

The sun.security.pkcs11.SunPKCS11 provider implementation used here is available in the Oracle Java environment. If you use a different Java implementation, see the documentation for details on how to use PKCS#11 devices with your JVM.

Follow these steps to set up SoftHSM and add a self-signed key pair:

  1. Install SoftHSM, including setting up the configuration and the SOFTHSM2_CONF environment variable.

    For details, see the SoftHSM documentation, using the following hints:

    • Make sure you can write tokens to SoftHSM:

      $ cat $SOFTHSM2_CONF
      # SoftHSM v2 configuration file
      
      # You must be able to write to the token dir when initializing the device:
      directories.tokendir = /path/to/softhsm/tokens
      objectstore.backend = file
      
      # ERROR, WARNING, INFO, DEBUG
      log.level = INFO
           
    • Keep track of the PINs that you enter when initializing the device:

      $ softhsm2-util --init-token --slot 0 --label "My token 1"
      *** SO PIN (4-255 characters) ***
      Please enter SO PIN:
      Please reenter SO PIN:
      *** User PIN (4-255 characters) ***
      Please enter user PIN:
      Please reenter user PIN:
      The token has been initialized.
           

      The SO PIN is to reinitialize the token.

      The user PIN is the one the OpenDJ server needs to access the device.

  2. Generate a key pair on the device:

    1. To use the Java keytool command with the device, you must first create a PKCS#11 configuration file that is used by the security provider implementation:

      $ cat /path/to/softhsm/hsm.conf
      name = SoftHSM
      library = /path/to/softhsm/2.0.0/lib/softhsm/libsofthsm2.so
      slot = 0
      attributes(generate, *, *) = {
         CKA_TOKEN = true
      }
      attributes(generate, CKO_CERTIFICATE, *) = {
         CKA_PRIVATE = false
      }
      attributes(generate, CKO_PUBLIC_KEY, *) = {
         CKA_PRIVATE = false
      }
      attributes(*, CKO_SECRET_KEY, *) = {
         CKA_PRIVATE = false
      }
           

      Notes regarding the configuration file:

      • The format is described in the Java PKCS#11 Reference Guide.

      • The library must point to the libsofthsm2.so library installed with SoftHSM.

      • The slot must be one used when initializing the device.

    2. Using the configuration file, generate the key pair.

      The following example generates a key pair with the alias server-cert that is the default for several OpenDJ connection handlers:

      $ keytool \
       -genkeypair \
       -alias server-cert \
       -keyalg RSA \
       -keysize 2048 \
       -ext "san=dns:opendj.example.com" \
       -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
       -keystore NONE \
       -storetype PKCS11 \
       -providerClass sun.security.pkcs11.SunPKCS11 \
       -providerArg /path/to/softhsm/hsm.conf
      Enter keystore password:
           

      The keystore password is the user PIN.

    3. Self-sign the public key certificate:

      $ keytool \
       -selfcert \
       -alias server-cert \
       -keystore NONE \
       -storetype PKCS11 \
       -providerClass sun.security.pkcs11.SunPKCS11 \
       -providerArg /path/to/softhsm/hsm.conf
      Enter keystore password:
           

      The keystore password is the user PIN.

      Using a CA-signed cert is similar, but not shown here.

To Create a PKCS11 Key Manager Provider

Follow these steps:

  1. Make sure you have the cleartext PIN available.

    With SoftHSM, this is the user PIN set when initializing the slot where you stored the keys.

  2. Make sure that the Java environment can find SoftHSM with its configuration.

    For example, add a provider definition by using an extra Java security properties file as in the following example:

    # Define the additional security provider in the extra file:
    $ cat /path/to/opendj/config/java.security
    # Security provider for accessing SoftHSM:
    security.provider.11=sun.security.pkcs11.SunPKCS11 /path/to/softhsm/hsm.conf
    
    # Use the extra file when starting an OpenDJ server:
    $ grep java.security /path/to/opendj/config/java.properties
    start-ds.java-args=-server -Djava.security.properties=/path/to/opendj/config/java.security
    
    # Restart the OpenDJ server so the changes take effect:
    $ stop-ds --restart
       
  3. Create the PKCS11 key manager provider configuration.

    The following example creates a provider for SoftHSM with a protected file holding the cleartext user PIN on the only line in the file:

    $ touch /path/to/opendj/config/softhsm.pin
    $ chmod 600 /path/to/opendj/config/softhsm.pin
    $ vi /path/to/opendj/config/softhsm.pin
    # Add the user PIN on the first and only line in the file, and save your work.
    $ dsconfig \
     create-key-manager-provider \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --provider-name SoftHSM \
     --type pkcs11 \
     --set enabled:true \
     --set key-store-pin-file:/path/to/opendj/config/softhsm.pin \
     --trustAll \
     --no-prompt
       

    OpenDJ key manager providers also support storing the PIN in the configuration, in an environment variable, or in a Java property.

To Use a PKCS11 Key Manager Provider

Follow these steps:

  1. Set a connection handler or authorization mechanism to use the PKCS11 key manager provider.

    The following example configures the LDAPS connection handler to use the SoftHSM provider:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAPS Connection Handler" \
     --set listen-port:1636 \
     --set enabled:true \
     --set use-ssl:true \
     --set key-manager-provider:SoftHSM \
     --trustAll \
     --no-prompt
       
  2. Verify that the secure connection negotiation works with the HSM configured:

    $ ldapsearch \
     --port 1636 \
     --hostname opendj.example.com \
     --baseDN dc=example,dc=com \
     --useSSL \
     "(uid=bjensen)" \
     cn
    The server is using the following certificate:
        Subject DN:  CN=opendj.example.com, O=Example Corp, C=FR
        Issuer DN:  CN=opendj.example.com, O=Example Corp, C=FR
        Validity:  <validity-period>
    Do you wish to trust this certificate and continue connecting to the server?
    Please enter "yes" or "no":yes
    dn: uid=bjensen,ou=People,dc=example,dc=com
    cn: Barbara Jensen
    cn: Babs Jensen
       

7.5. TLS Protocols and Cipher Suites

When a server and client negotiate a secure connection, they negotiate use of a common protocol and cipher suite. If they cannot negotiate a common protocol and cipher suite, they will fail to set up a secure connection.

Furthermore, researchers continue to find vulnerabilities in protocols and cipher suites. If the server continues to support those protocols and cipher suites, then clients can use them when negotiating connections. Attackers can then exploit the vulnerabilities. It is therefore important to understand how to read and to restrict the list of supported protocols and cipher suites.

OpenDJ servers depend on the underlying JVM to support security protocols and cipher suites. By default, all supported protocols and cipher suites are available. For details, see the documentation for the JVM. For Oracle Java, see the Java Cryptography Architecture Oracle Providers Documentation describing the The SunJSSE Provider.

Bear in mind that support for protocols and cipher suites can be added and removed in Java update releases. The protocols and cipher suites available are also determined by the security policy. For example, see "Using Unlimited Strength Cryptography".

To List Protocols and Cipher Suites
  • To list the protocols and cipher suites that an OpenDJ server supports, read the supportedTLSProtocols and supportedTLSCiphers attributes of the root DSE:

    $ ldapsearch \
     --port 1389 \
     --baseDN "" \
     --searchScope base \
     "(objectclass=*)" \
     supportedTLSCiphers supportedTLSProtocols
       

    A supportedTLSCiphers name, such as TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, identifies the key attributes of the cipher suite:

    TLS

    Specifies the protocol, in this case TLS.

    ECDHE_RSA

    Specifies the key exchange algorithm used to determine how the client and server authenticate during the handshake phase.

    In this example, an elliptic curve variant of the Diffie-Hellman key exchange is used, where a random value chosen by the client is encrypted with the server's RSA public key.

    WITH_AES_256_GCM

    Specifies the bulk encryption algorithm, including the key size or initialization vectors.

    This example specifies the Advanced Encryption Standard (AES) with 256-bit key size and Galois/Counter Mode (GCM) block cipher mode.

    SHA384

    Specifies the message authentication code algorithm used to create the message digest, which is a cryptographic hash of each block in the message stream.

    In this example, the SHA-2 hash function, SHA-384, is used.

    A supportedTLSProtocols name identifies the protocol and version, such as TLSv1.2.

To Restrict Protocols and Cipher Suites

Choosing which protocol versions and cipher suites to allow for negotiating secure connections depends on known vulnerabilities, estimations of what is secure, and what peers support.

The default support is backward-compatible with old clients, meaning that if you do nothing it is possible for a client to use a protocol version that is known to have vulnerabilities, or to negotiate an insecure or very weakly secure connection. To avoid this, limit the protocols and cipher suites that you allow.

You can limit supported protocols and cipher suites by setting the properties, ssl-protocol and ssl-cipher-suite. These are available on connection handlers, and on components that connect to remote services including the global Crypto Manager component used for replication.

This procedure is based on server-side TLS recommendations from the Mozilla Operations Security team taken at the time of this writing. Recommendations evolve. Make sure you use current recommendations when configuring security settings.

The examples in this procedure assume you have installed an unlimited encryption strength policy:

  1. For each cipher suite key algorithm to support, create a key pair using the supported key algorithm.

    The following example adds two key pairs to the default PKCS#12 keystore, with one key using RSA and the other key using elliptic curve.

    $ keytool \
     -genkeypair \
     -alias server-cert-rsa \
     -keyalg RSA \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
    $ keytool \
     -genkeypair \
     -alias server-cert-ec \
     -keyalg EC \
     -ext "san=dns:opendj.example.com" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -keypass:file /path/to/opendj/config/keystore.pin
       
  2. On the components you use, explicitly set the supported protocols and cipher suites.

    The following example adjusts settings for the LDAP and LDAPS connection handlers:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAP Connection Handler" \
     --add ssl-protocol:TLSv1.2 \
     --add ssl-cipher-suite:TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 \
     --add ssl-cipher-suite:TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 \
     --add ssl-cipher-suite:TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 \
     --add ssl-cipher-suite:TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 \
     --add ssl-cipher-suite:TLS_EMPTY_RENEGOTIATION_INFO_SCSV \
     --no-prompt \
     --trustAll
    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAPS Connection Handler" \
     --add ssl-protocol:TLSv1.2 \
     --add ssl-cipher-suite:TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 \
     --add ssl-cipher-suite:TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 \
     --add ssl-cipher-suite:TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 \
     --add ssl-cipher-suite:TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 \
     --add ssl-cipher-suite:TLS_EMPTY_RENEGOTIATION_INFO_SCSV \
     --no-prompt \
     --trustAll
       

    The TLS_ECDHE_EC* cipher suites call for a server certificate with an elliptic curve key algorithm. The TLS_ECDHE_RSA* cipher suites call for a server certificate with an RSA key algorithm.

    The TLS_EMPTY_RENEGOTIATION_INFO_SCSV cipher suite is a renegotiation information extension with a special Signaling Cipher Suite Value (SCSV) to help older clients properly complete a handshake.

  3. On the components you use, set the multivalued property, ssl-cert-nickname, to identify each certificate alias:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAP Connection Handler" \
     --set enabled:true \
     --set listen-port:1389 \
     --set allow-start-tls:true \
     --set ssl-cert-nickname:server-cert-ec \
     --set ssl-cert-nickname:server-cert-rsa \
     --set key-manager-provider:"Default Key Manager" \
     --set trust-manager-provider:"JVM Trust Manager" \
     --trustAll \
     --no-prompt
    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAPS Connection Handler" \
     --set listen-port:1636 \
     --set enabled:true \
     --set use-ssl:true \
     --set ssl-cert-nickname:server-cert-ec \
     --set ssl-cert-nickname:server-cert-rsa \
     --trustAll \
     --no-prompt
       

    When negotiating a secure connection, the server can now use either key.

To Restrict Protocols For Command-Line Tools

You can specify which protocol versions to allow when command-line tools negotiate secure connections with LDAP servers.

The command-line tools depend on a system property, org.opends.ldaps.protocols. This property takes a comma-separated list of protocols. The default is constructed from the list of all protocols the JVM supports, removing protocol names starting with SSL. For example, if support is enabled in the JVM for versions 1, 1.1., and 1.2 of the TLS protocol, then the default is "TLSv1,TLSv1.1,TLSv1.2".

  • Restrict the protocols to use by setting the property in one of the following ways:

    • Set the property by editing the java-args for the command in config/java.properties.

      For example, to restrict the protocol to TLS v1.2 when the status command negotiates a secure administrative connection, edit the corresponding line in config/java.properties:

      status.java-args=-Xms8m -client -Dorg.opends.ldaps.protocols=TLSv1.2
    • Set the property at runtime when running the command.

      The following example restricts the protocol to TLS v1.2 when the status command negotiates a secure administrative connection:

      $ export OPENDJ_JAVA_ARGS="-Dorg.opends.ldaps.protocols=TLSv1.2"
      $ status \
       --bindDN "cn=Directory Manager" \
       --bindPassword password \
       --trustAll
           

Chapter 8. Securing Network Connections

ForgeRock Directory Services software has incoming and outgoing connections. Depending on the deployment, you might need to secure all of these connections. In this chapter you will learn to:

  • Understand what connections to allow, and the conditions where connections must be secured

  • Require HTTPS connections from client applications

  • Require LDAPS connections from client applications

  • Understand TLS for all relevant protocols

  • Understand how OpenDJ software handles client certificate validation

  • Restrict the server resources that client requests are allowed to consume

Securing connections depends on PKI and asymmetric, public/private key pairs. For details, see "Managing Certificates and Private Keys".

This chapter focuses on securing connections. Basic connection handler configuration is covered in "Configuring Connection Handlers" in the Administration Guide.

8.1. Determining Which Connections Must Be Secure

This section reviews incoming and outgoing connections, and offers recommendations that depend on the deployment.

8.1.1. Incoming Connections

Incoming connections are those where clients access ForgeRock Directory Services on the host system. See "Recommendations For Incoming Connections" for suggestions.

Recommendations For Incoming Connections
ProtocolRecommendations

Administration

OpenDJ servers use an Administration Connector to handle connections from administration tools.

Leave the Administration Connector configured to use SSL/TLS unless you are certain that the connections are already secured by some other means.

DSML

DSML support is available through the OpenDJ DSML gateway.

Use HTTPS to protect client connections. For details, see "Securing Web Applications".

HTTP

HTTP connections that are not protected by SSL/TLS use cleartext messages. When you allow a server to establish insecure (cleartext) connections, there is no way to prevent client applications from sending sensitive data. For example, a client could send unprotected credentials in an HTTP Authorization header. Even if the server were to reject the request, the credentials would already be leaked to any eavesdroppers.

HTTP could be allowed instead of HTTPS with anonymous connections if only public information is exposed, and no client applications send credentials or other sensitive information. You can configure the HTTP connection handler to use only the default HTTP Anonymous authorization mechanism, described in "To Set Up HTTP Authorization" in the Administration Guide.

HTTPS

Prefer HTTPS for secure connections over HTTP.

When using an HTTP connection handler, use HTTPS to protect client connections.

Some client applications require a higher level of trust than others, such as clients with additional privileges or access. Client application deployers might find it easier to manage public keys as credentials than to manage user name/password credentials. Client applications can use SSL client authentication.

When using OpenDJ REST to LDAP gateway, use HTTPS to protect client connections. For details, see "Securing Web Applications".

JMX

Secure JMX access with the SSL/TLS related properties, such as use-ssl and others.

LDAP

LDAP connections that are not protected by SSL/TLS use cleartext messages. When you allow a server to establish insecure (cleartext) connections, there is no way to prevent client applications from sending sensitive data. For example, a client could send unprotected credentials in an LDAP simple bind request. Even if the server were to reject the request, the credentials would already be leaked to any eavesdroppers.

If all the LDAP applications are under your control, you can make sure that the only "insecure" requests are anonymous binds, SASL binds, or StartTLS requests. You can also set the global server property reject-unauthenticated-requests to true, as described in "Restricting Client Access" in the Administration Guide, although that setting does not prevent cleartext simple binds.

LDAPS

Prefer LDAPS for secure connections, or make sure that applications use StartTLS after establishing a cleartext LDAP connection and before performing other operations.

Some client applications require a higher level of trust than others, such as clients with additional privileges or access. Client application deployers might find it easier to manage public keys as credentials than to manage user name/password credentials. Client applications can use SSL client authentication, as described in "Authenticating Client Applications With a Certificate".

Replication

Replication is required in all but a few deployments.

If any of the following are true, replication is required:

  • Client applications require highly available access to critical services, such as authentication and updates.

  • Client applications have specific quality of service requirements.

  • Client applications use the directory service to share common data.

  • Directory service downtime, either planned or unplanned, can lead to lost organizational or business opportunities.

  • Backup operations must be performed while the service is online.

  • Update and upgrade operations must be performed while the service is online.

  • Load sometimes exceeds the service that a single server can provide.

  • Global directory services must be available at more than one location.

Configure replication to use secure connections unless you are certain that network connections between replicas are already secured by some other means.

SNMP

Secure SNMP access with settings for security-level and related properties.

SSH

OpenDJ administration tools, such as dsconfig and dsreplication, can connect securely. If the firewall is configured to prevent remote access to the administration connector port, however, then use a secure connection to access the system remotely.

ForgeRock Directory Services are separate and independent from tools for accessing the host system remotely. A recommended choice for UNIX and Linux systems is Secure Shell (SSH).

The user account for running directory services should not be the same user account for connecting remotely. Instead, connect as a another user who can then assume the role of the directory services account. The following example demonstrates this approach:

# Log in to opendj.example.com:
me@my-laptop $ ssh user@opendj.example.com
user@opendj.example.com's password:
# Logged in to opendj.example.com as user.
Last login: ... from ...
# Run dsconfig interactively as opendj:
user@opendj.example.com $ sudo -i -u opendj dsconfig
     

Secure Copy (SCP) uses SSH to transfer files securely. SCP is an appropriate protocol for copying backup data, for example.


For a list of default port numbers associated with the protocols, see "Server Ports".

8.1.2. Outgoing Connections

Outgoing connections are those where ForgeRock Directory Services act as clients of remote services. See "Recommendations For Outgoing Connections" for suggestions.

Recommendations For Outgoing Connections
ClientRecommendations

Common Audit event handlers

Configure ForgeRock Common Audit event handlers to use HTTPS or TLS when connecting to external log services.

For details, see "Common ForgeRock Access Logs" in the Administration Guide.

DSML gateway

The OpenDJ DSML gateway connects to remote LDAP directory servers. Use LDAP and StartTLS or LDAPS to protect the connections.

For details, see "Securing Web Applications".

OAuth 2.0-based HTTP authorization mechanisms

HTTP authorization can be based on OAuth 2.0, where an OpenDJ server resolves OAuth 2.0 tokens as described in "To Set Up HTTP Authorization" in the Administration Guide.

Use HTTPS to protect the connections to OAuth 2.0 authorization servers.

Pass-Through Authentication

When an OpenDJ server is configured to perform pass-through authentication as described in "Configuring Pass-Through Authentication" in the Administration Guide, it connects to remote LDAP directory servers for authentication.

Use LDAP with StartTLS or LDAPS to protect the connections.

Proxy Requests

A directory proxy server uses an LDAP simple bind request to connect to remote directory servers, where the proxy sends its bind DN and bind password.

Use LDAP with StartTLS or LDAPS to protect the bind credentials and to protect other requests to remote directory servers.

Replication

Configure replication to use secure connections unless you are certain that network connections between replicas are already secured by some other means.

REST to LDAP gateway

The OpenDJ REST to LDAP gateway connects to remote LDAP directory servers. Use LDAP with StartTLS or LDAPS to protect the connections.

For details, see "Securing Web Applications".

SMTP account notification and alert handlers

OpenDJ servers can send email account notifications and alerts.

The current implementation does not provide a means to authenticate or to secure SMTP connections when sending mail. Send messages to a mail server on the local host where authentication is not required.

Account notification configuration is described in "Managing Account Status Notification" in the Administration Guide.

Alert configuration is described in "Alert Notifications" in the Administration Guide.


8.2. Requiring HTTPS Connections From Client Applications

This section shows how to configure an OpenDJ server to require HTTPS connections from client applications.

After you make the changes, HTTP clients must connect to the HTTPS port.

For details on configuring OpenDJ DSML gateway and REST to LDAP gateway to require HTTPS, see the documentation for the web application container as described in "Securing Web Applications".

To Set Up HTTPS Access

The following steps demonstrate how to change the default HTTP connection handler configuration to use only HTTPS:

  1. Make sure a server certificate and associated private key are available:

    $ keytool \
     -list \
     -alias server-cert \
     -keystore /path/to/opendj/config/keystore \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -storetype PKCS12
    ...
    server-cert, <date>, PrivateKeyEntry
    ...
        
  2. Disable the HTTP connection handler to prevent (cleartext) HTTP access:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "HTTP Connection Handler" \
     --set enabled:false \
     --trustAll \
     --no-prompt
      
  3. Configure the HTTP connection handler to use HTTPS access.

    The following example shows how to set the port to 8443 and perform TLS using the default server certificate:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "HTTP Connection Handler" \
     --set enabled:true \
     --set listen-port:8443 \
     --set use-ssl:true \
     --set key-manager-provider:"Default Key Manager" \
     --set trust-manager-provider:"JVM Trust Manager" \
     --trustAll \
     --no-prompt
      
  4. (Optional) Enable the HTTP access log.

    • The following command enables JSON-based HTTP access logging as described in "Configuring JSON Access Logs" in the Administration Guide:

      $ dsconfig \
       set-log-publisher-prop \
       --hostname opendj.example.com \
       --port 4444 \
       --bindDN "cn=Directory Manager" \
       --bindPassword password \
       --publisher-name "Json File-Based HTTP Access Logger" \
       --set enabled:true \
       --no-prompt \
       --trustAll
          
    • The following command enables HTTP access logging as described in "Standard HTTP Access Logs" in the Administration Guide:

      $ dsconfig \
       set-log-publisher-prop \
       --hostname opendj.example.com \
       --port 4444 \
       --bindDN "cn=Directory Manager" \
       --bindPassword password \
       --publisher-name "File-Based HTTP Access Logger" \
       --set enabled:true \
       --no-prompt \
       --trustAll
          
  5. (Optional) If the deployment requires SSL client authentication, set the properties ssl-client-auth-policy and trust-manager-provider appropriately.

  6. After you set up the HTTP connection handler, make sure that at least one HTTP endpoint configuration object is enabled.

    For details, see "To Set Up REST Access to User Data" in the Administration Guide or "To Set Up REST Access to Administrative Data" in the Administration Guide.

8.3. Requiring LDAPS Connections From Client Applications

This section shows how to configure an OpenDJ server to require LDAPS connections from client applications, preventing potentially insecure, initially cleartext connections over LDAP by following these procedures:

  1. "To Set Up LDAPS Access"

  2. "To Disable LDAP Access"

After you make the changes, LDAP clients must connect to the LDAPS port.

Note

The standard port number for LDAPS client access is 636. If you install an OpenDJ server as a user who can use port 636 and the port is not yet in use, then 636 is the default port number presented at setup time. If you install as a user who cannot use a port number less than 1024, then the default port number presented at setup time is 1636.

To Set Up LDAPS Access

If LDAPS access was not configured at during setup, follow these steps:

  1. Make sure a server certificate and associated private key are available:

    $ keytool \
     -list \
     -alias server-cert \
     -keystore /path/to/opendj/config/keystore \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -storetype PKCS12
    server-cert, <date>, PrivateKeyEntry
      
  2. Configure the server to activate LDAPS access:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAPS Connection Handler" \
     --set enabled:true \
     --set listen-port:1636 \
     --set use-ssl:true \
     --trustAll \
     --no-prompt
      
  3. (Optional) If the deployment requires SSL client authentication, set the properties ssl-client-auth-policy and trust-manager-provider appropriately.

To Disable LDAP Access

Follow these steps to prevent an OpenDJ server from allowing (cleartext) LDAP access:

  1. Configure the server to disable LDAP access:

    $ dsconfig \
     set-connection-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name "LDAP Connection Handler" \
     --set enabled:false \
     --trustAll \
     --no-prompt
      
  2. Verify that LDAP access is disabled:

    $ status \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --script-friendly \
     --trustAll
    ...
    Address:Port: 0.0.0.0:1389
    Protocol: LDAP
    State: Disabled
    ...
      

8.4. How Transport Layer Security is Established

When a client and server set up a secure HTTP (HTTPS) or LDAP (LDAPS) connection, they use a protocol to establish the security, and then encapsulate HTTP or LDAP messages using the secure protocol. This section explains the process, making it clear how client certificates are handled differently in mutual authentication and in an LDAP bind using a certificate.

A connection that uses TLS, a protocol based on the SSL protocol, is a connection that is private and reliable. Communications on the connection are kept private by being encrypted with a symmetric key for the session that only the client and server know. Communications are reliable because their integrity is checked by using a message authentication code (MAC).

The TLS protocol is independent of the application protocol. TLS encapsulates application level protocols like HTTP and LDAP. The client and server negotiate the secure connection before any messages are sent using the application protocol.

When a client and server set up a secure connection, they use the TLS handshake protocol to negotiate a secure session. During the handshake the server and client use asymmetric keys, their public key certificates and associated private keys, to authenticate (prove their identities).

The default configuration for an OpenDJ server and most web servers has the server sending its certificate during the handshake. The client is not required to send its certificate. This allows the client to authenticate the server when negotiating security. It does not allow the server to authenticate the client at this stage. It avoids requiring all clients, such as browsers, to manage keys and to get certificates signed by well-known CAs.

For client applications that are part of the software infrastructure rather than end user applications such as browsers, managing keys and getting certificates signed by well-known CAs can be a better choice for authentication than usernames and passwords. Such clients present their certificates during the handshake, allowing the server to authenticate the client. When both the server and client present certificates during the handshake, this is known as mutual authentication.

In TLS v1.2, for example, a successful initial handshake involves the client and server performing the following steps:

  1. Exchanging supported algorithms and random values

  2. Exchanging cryptographic information to agree on an initial secret

  3. Exchanging certificates and cryptographic information to allow authentication (as described above)

  4. Generating a symmetric key for the sessions by using the initial secret and the random values exchanged

  5. Setting the security parameters for the session

  6. Verifying that each are using the same security parameters, and that the handshake was not tampered with

Once again, this handshake completes before any HTTP or LDAP messages are sent over the connection. In other words, HTTP authentications and LDAP binds happen after the secure connection has been established.

OpenDJ support for TLS relies on the Java implementation. OpenDJ support for LDAP authentication is part of the OpenDJ server. This is an important distinction:

  • When a client application presents its certificate for mutual authentication during negotiation of a TLS connection, the JVM checks the certificate independently of the certificates stored in the client application's directory entry. For details, see "Client Certificate Validation and the Directory".

    When securing the transport layer with mutual authentication, the client certificate must match or must be signed by a CA whose certificate matches a trusted certificate held in a Java truststore.

  • When the client application binds to the OpenDJ server with its certificate, the OpenDJ server uses a certificate mapper to check that the certificate presented matches the certificate in the client's directory entry.

    When using a certificate to authenticate a client in an LDAP bind, the certificate must match a certificate stored in the client's LDAP entry.

8.5. Client Certificate Validation and the Directory

This section clarifies the roles that client applications' X.509 digital certificates play in establishing secure connections and in authenticating the client as a directory user. Be aware that establishing a secure connection happens before the server handles the LDAP or HTTP requests that the client sends over the secure connection. Establishing a secure connection is handled separately from authenticating a client as a directory user, even though both processes can involve the client's certificate.

When a client and a server negotiate a secure connection over LDAPS or HTTPS, or over LDAP using the StartTLS operation, they can use public key cryptography to authenticate each other. The server, client, or both present certificates to each other. By default, OpenDJ LDAPS and HTTPS connection handlers are configured to present the server certificate, and to consider the client certificate optional. The connection handler property ssl-client-auth-policy makes the latter behavior configurable. For the DSML and REST to LDAP gateways, HTTPS negotiation is handled by the web application container where the gateway runs. See the web application container documentation for details on configuring how the container handles the client certificate.

One step toward establishing a secure connection involves validating the certificate that was presented by the other party. Part of this is trusting the certificate. The certificate identifies the client or server and the CA certificate used to sign the client or server certificate. The validating party checks that the other party corresponds to the one identified by the certificate, and checks that the signature can be trusted. If the signature is valid, and the CA certificate used to sign the certificate can be trusted, then the certificate can be trusted. This part of the validation process is also described briefly in "How Keys are Used".

Certificates can be revoked after they are signed. Therefore, the validation process can involve checking whether the certificate is still valid. Two different methods for performing this validation use the Online Certificate Status Protocol (OCSP) or Certificate Revocation Lists (CRLs). OCSP is a newer solution that provides an online service to handle the revocation check for a specific certificate. CRLs are potentially large lists of user certificates that are no longer valid or that are on hold. A CRL is signed by the CA. The validating party obtains the CRL and checks that the certificate being validated is not listed. For a brief comparison, see OCSP: Comparison to CRLs. A certificate can include links to contact the OCSP responder or to the CRL distribution point. The validating party can use these links to check whether the the certificate is still valid.

In both cases, the CA who signed the certificate acts as the OCSP responder or publishes the CRLs. When establishing a secure connection with a client application, an OpenDJ server relies on the CA for OCSP and CRLs. This is the case even when OpenDJ is the repository for the CRLs.

An OpenDJ directory service is a logical repository for certificates and CRLs. For example, an OpenDJ directory server can store CRLs in a certificateRevocationList attribute as in the following example entry:

dn: cn=My CA,dc=example,dc=com
objectClass: top
objectClass: applicationProcess
objectClass: certificationAuthority
cn: My CA
authorityRevocationList;binary: Base64-encoded ARL
cACertificate;binary:: Base64-encoded CA certificate
certificateRevocationList;binary:: Base64-encoded CRL
 

The CRL could then be replicated to other OpenDJ directory servers for high availability. (Notice the ARL in this entry. An ARL is like a CRL, but for CA certificates.)

Again, despite being a repository for CRLs, an OpenDJ directory server does not use the CRLs directly when checking a client certificate. Instead, when negotiating a secure connection, the server depends on the JVM security configuration. The JVM configuration governs whether validation uses OCSP, CRLs, or both. As described in the Java PKI Programmer's Guide under Support for the CRL Distribution Points Extension, and Appendix C: On-Line Certificate Status Protocol (OCSP) Support, the JVM relies on system properties that define whether to use the CRL distribution points defined in certificates, and how to handle OCSP requests. These system properties can be set system-wide in $JAVA_HOME/lib/security/java.security ($JAVA_HOME/jre/lib/security/java.security for the JDK). The JVM handles revocation checking without the OpenDJ server's involvement.

After a connection is negotiated, the server can authenticate a client application at the LDAP level based on the certificate. For details, see "Authenticating Client Applications With a Certificate".

OCSP and obtaining CRLs depend on network access to the CA. If OpenDJ servers or the DSML or REST to LDAP gateways run on a network where the CA is not accessible, and the deployment nevertheless requires OSCP or checking CRLs for client application certificates, then you must provide some alternative means to handle OCSP or CRL requests. The JVM can be configured to use a locally available OCSP responder, for example, and that OCSP responder might depend on an OpenDJ directory server. If the solution depends on CRLs, you could regularly update the CRLs in the directory with copies of the CA CRLs obtained by other means.

8.6. Setting Resource Limits

When determining the connection configuration for the deployment, also set resource limits to prevent directory clients from using an unfair share of system resources.

This section covers how to:

  • Limit the resources devoted to directory searches

  • Limit concurrent client connections

  • Limit how long connections can remain idle before they are dropped

  • Limit the size of client requests

  • Understand how resource limits are set for proxied authorization

In addition, you can further limit what clients can do using the configuration properties described in "Restricting Client Access" in the Administration Guide.

8.6.1. Limiting Search Resources

Well-written directory client applications limit the search scope with filters that narrow the number of results returned. This prevents them from performing unindexed searches. By default, an OpenDJ server only allows users with appropriate privileges to perform unindexed searches.

In addition to letting the server prevent unindexed searches, you can set limits on search operations, such as the following:

  • The lookthrough limit defines the maximum number of candidate entries that an OpenDJ directory server considers when processing a search.

    The default lookthrough limit of 5000 is set by the global server property lookthrough-limit.

    You can override the limit per user with the operational attribute, ds-rlim-lookthrough-limit.

  • The size limit sets the maximum number of entries returned for a search.

    The default size limit of 1000 is set by the global server property size-limit.

    You can override the limit per user with the operational attribute, ds-rlim-size-limit.

    In addition, search requests themselves can include a size limit setting. The ldapsearch command has an --sizeLimit option.

  • The time limit defines the maximum processing time OpenDJ devotes to a search operation.

    The default time limit of 1 minute is set by the global server property time-limit.

    You can override the limit on a per user basis with the operational attribute, ds-rlim-time-limit. Times for ds-rlim-time-limit are expressed in seconds.

    In addition, search requests themselves can include a time limit setting. The ldapsearch command has an --timeLimit option.

  • The idle time limit defines how long OpenDJ allows idle connections to remain open.

    No default idle time limit is set. You can set an idle time limit by using the global server property idle-time-limit.

    You can override the limit on a per user basis with the operational attribute, ds-rlim-idle-time-limit. Times for ds-rlim-idle-time-limit are expressed in seconds.

  • The maximum number of persistent searches is set by the global server property max-psearches.

To Set Search Limits For a User
  1. Give an administrator access to update the operational attributes related to search limits:

    $ cat search-limits.ldif
    dn: ou=People,dc=example,dc=com
    changetype: modify
    add: aci
    aci: (targetattr = "ds-rlim-lookthrough-limit||ds-rlim-time-limit||ds-rlim-size-limit")
     (version 3.0;acl "Allow Kirsten Vaughan to manage search limits";
     allow (all) (userdn = "ldap:///uid=kvaughan,ou=People,dc=example,dc=com");)
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     search-limits.ldif
       
  2. Change the user entry to set the limits to override:

    $ cat size-limit-bjensen.ldif
    dn: uid=bjensen,ou=People,dc=example,dc=com
    changetype: modify
    add: ds-rlim-size-limit
    ds-rlim-size-limit: 10
    
    $ ldapmodify \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     size-limit-bjensen.ldif
       

    When Babs Jensen performs a search returning more than 10 entries, she sees the following message:

    $ ldapsearch \
     --port 1389 \
     --bindDN uid=bjensen,ou=people,dc=example,dc=com \
     --bindPassword hifalutin \
     --baseDN dc=example,dc=com \
     "(&)"
    ...
    # The LDAP search request failed: 4 (Size Limit Exceeded)
    # Additional Information:  This search operation has sent the maximum of 10 entries to the client
       
To Set Search Limits For Users in a Group
  1. Give an administrator the privilege to write subentries, such as those used for setting collective attributes:

    $ cat subentry-write.ldif
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    changetype: modify
    add: ds-privilege-name
    ds-privilege-name: subentry-write
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     subentry-write.ldif
        

    Notice here that the root DN user cn=Directory Manager assigns privileges to Kirsten Vaughan. Any administrator with the privilege-change privilege can assign other privileges. Assuming the administrator can update administrator privileges, they can assign themselves the bypass-acl privilege. Then they are no longer bound by access control instructions, including both user data ACIs and global ACIs. For this reason, avoid assigning the privilege-change privilege to normal administrator users.

  2. Create an LDAP subentry to specify the limits using collective attributes:

    $ cat size-limit-collective.ldif
    dn: cn=Remove Administrator Search Limits,dc=example,dc=com
    objectClass: collectiveAttributeSubentry
    objectClass: extensibleObject
    objectClass: subentry
    objectClass: top
    cn: Remove Administrator Search Limits
    ds-rlim-lookthrough-limit;collective: 0
    ds-rlim-size-limit;collective: 0
    ds-rlim-time-limit;collective: 0
    subtreeSpecification: {base "ou=people", specificationFilter
      "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }
    
    $ ldapmodify \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     size-limit-collective.ldif
       
  3. Check the results:

    $ ldapsearch \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     --baseDN uid=kvaughan,ou=people,dc=example,dc=com \
     --searchScope base \
     "(&)" \
     ds-rlim-lookthrough-limit ds-rlim-time-limit ds-rlim-size-limit
    ds-rlim-lookthrough-limit: 0
    ds-rlim-time-limit: 0
    ds-rlim-size-limit: 0
       
To Limit Concurrent Persistent Searches

An LDAP persistent search uses server resources in the following way. Each persistent search opens a connection and keeps it open, though the connection can be idle for long periods of time. When a modification changes data in the search scope, the server returns a search result to the persistent search client. The more concurrent persistent searches, the more work the server has to do for each modification:

  • Set the global property max-psearches to limit the total number of concurrent persistent searches that an OpenDJ server accepts.

    The following example sets the limit to 30:

    $ dsconfig \
     set-global-configuration-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set max-psearches:30 \
     --trustAll \
     --no-prompt
       

8.6.2. Limiting Concurrent Client Connections

Each connection uses memory. On UNIX and Linux systems, each connection uses an available file descriptor.

You can use the global setting max-allowed-client-connections to limit the total number of concurrent client connections that an OpenDJ server accepts. The following example sets the limit to 64K, which is the minimum number of file descriptors that should be available to the OpenDJ server:

$ dsconfig \
 set-global-configuration-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --set max-allowed-client-connections:65536 \
 --trustAll \
 --no-prompt
 

8.6.3. Limiting Idle Time

If some client applications leave connections idle for long periods, an OpenDJ server can end up devoting resources to maintaining connections that are no longer used. If your network does not drop such connections eventually, you can configure the server to drop them by setting the global configuration property idle-time-limit. By default, no idle time limit is set.

If your network load balancer is configured to drop connections that have been idle for some time, set the OpenDJ idle time limit to a lower value than the idle time limit for the load balancer. This helps to ensure that idle connections are shut down in orderly fashion. Setting the OpenDJ limit lower than the load balancer limit is particularly useful with load balancers that drop idle connections without cleanly closing the connection and notifying the client and server.

Note

OpenDJ servers do not enforce idle timeout for persistent searches.

The following example sets the idle-time-limit to 24 hours:

$ dsconfig \
 set-global-configuration-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --set idle-time-limit:24h \
 --trustAll \
 --no-prompt
 

8.6.4. Limiting Maximum Request Size

The default maximum request size of 5 MB is set using the advanced connection handler property max-request-size. This is sufficient for most deployments. In cases where clients add groups with large numbers of members, however, some add requests can exceed the 5 MB limit.

The following example increases the limit to 20 MB for the LDAP connection handler:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "LDAP Connection Handler" \
 --set max-request-size:20mb \
 --trustAll \
 --no-prompt
 

Note that this setting affects only the size of requests, not responses.

8.6.5. Resource Limits and Proxied Authorization

Proxied authorization uses a standard LDAP control to permit an application to bind as one user and then carry out LDAP operations on behalf of other users.

When using proxied authorization as described in "Configuring Proxied Authorization" in the Developer's Guide, be aware that the resource limits do not change when the user proxies as another user. In other words, resource limits depend on the bind DN, not the proxy authorization identity.

Chapter 9. Securing Authentication

This chapter explains and demonstrates how to use supported authentication mechanisms in secure ways. In this chapter you will learn to:

  • Determine which authentication mechanisms to allow

  • Handle anonymous access to directory services appropriately

  • Protect simple binds (authentication with username and password)

  • Configure password policies

  • Enforce strong passwords and appropriate password storage

  • Authenticate with a public key certificate rather than a password (EXTERNAL SASL mechanism)

  • Authenticate using digest authentication (DIGEST-MD5 SASL mechanism)

  • Authenticate using Kerberos v5 (GSSAPI SASL mechanism)

9.1. About Authentication Mechanisms

As directory administrator, you must determine the authentication mechanisms that the directory service allows and that you encourage client applications to use.

Authentication is the process of verifying who is requesting access to a resource. The user or application making the request presents credentials, making it possible to prove that the requester is who they claim to be. The goal is to authorize access to directory resources depending on the confirmed identity of the user or application making the request.

LDAP is a stateful protocol, where the client sets up and maintains a connection with the server, potentially performing many operations or long-lived operations before disconnecting from the LDAP server. One of the LDAP operations, a bind, authenticates the client to the server. A bind is generally one of the first operations that a client performs, and clients can bind again on the same connection to reauthenticate.

Below the LDAP protocol at the transport layer, OpenDJ servers support SSL and TLS protocols with mutual client authentication based on the client certificate and public key infrastructure. This level of authentication is useful to properly secure connections. For details, see "How Transport Layer Security is Established". The authentication at this level is handled by the underlying JVM, and the client identity verified at this level is not available to the OpenDJ server for the purpose of fine-grained authorization. For fine-grained authorization, you need LDAP authentication.

OpenDJ servers support multiple authentication mechanisms for LDAP operations:

Simple bind (name/password) authentication

The client application presents a bind DN/password combination, and the server checks that the password matches the password on the entry with the specified bind DN.

Since this mechanism involves sending the credentials over the network, always use secure connections at the transport layer when you expect simple binds in production systems. You can configure either or both LDAPS and StartTLS, depending on what the client applications support.

For additional information, see "Protecting Simple Binds".

Anonymous authentication

Simple bind authentication without credentials.

Anonymous authentication allows the server to make authorization decisions when it has been confirmed that the user or application is unknown.

When the directory has publicly readable resources, you can allow anonymous authentication and configure access control to let even anonymous users read them.

For additional information, see "Handling Anonymous Access".

SASL authentication

Simple Authentication and Security Layer (SASL) is a framework, rather than a single method. OpenDJ servers provide handlers for a number of SASL mechanisms, including Digest MD5, and strong authentication choices like the External SASL mechanism handler for certificate-based authentication, and the GSSAPI SASL mechanism handler for use with Kerberos v5 systems.

Certificate-based authentication is well-suited for applications where it is hard to protect name/password combinations. For additional information, see "Authenticating Client Applications With a Certificate".

GSSAPI-based authentication is useful for interoperation with Kerberos. For additional information, see "Authenticating With Kerberos".

Authentication with proxied authorization

The client application binds with its credentials, and uses proxied authorization to perform operations as another user.

For details, see "Configuring Proxied Authorization" in the Developer's Guide. Client applications can use another means to authenticate the user before requesting proxied authorization.

Authentication using another LDAP directory

The client application binds with its credentials, and another LDAP directory service handles the authentication. This is known as pass-through authentication.

Pass-through authentication is particularly useful when you use another directory service with an OpenDJ server. An OpenDJ directory server stores part of the user profile, and the authentication credentials are managed by the remote directory service. For details, see "Configuring Pass-Through Authentication" in the Administration Guide.

OpenDJ servers and OpenDJ REST to LDAP gateway also support multiple HTTP authentication mechanisms.

The identity from the HTTP request is mapped to an LDAP account for use in authorization decisions, so the mechanisms are known as authorization mechanisms. Their configuration is described in "To Set Up HTTP Authorization" in the Administration Guide. The following authorization mechanisms are available:

HTTP Basic authorization

The client application sends an HTTP request that uses HTTP Basic authentication.

The client application can alternatively send an HTTP request with username and password headers.

You configure OpenDJ software to map the HTTP username to an LDAP DN, and the result is like a simple name/password bind.

Since this method involves sending the credentials over the network, always secure the connections at the transport layer in production systems.

Anonymous authorization

The client application sends an HTTP request without authenticating.

You configure OpenDJ software either to map the HTTP request to anonymous authentication at the LDAP level, or to bind at the LDAP level as a specific user.

OAuth 2.0 authorization

The client application sends an HTTP request bearing an OAuth 2.0 access token including at least a scope whose value makes it possible to determine the user identity.

You configure OpenDJ software to resolve the access token and to map the user identity from the scope to an LDAP account.

Since this method involves sending bearer tokens over the network, always secure connections at the transport layer for OAuth 2.0 authorization in production systems.

9.2. Handling Anonymous Access

Anonymous access means access to the directory where the client making the request provides no credentials. In general, anonymous clients can read public information.

In LDAP, an anonymous bind is a bind operation using simple authentication with an empty DN and an empty password. An OpenDJ server applies access controls (ACIs) to allow anonymous clients access only to information that should be fully public, such as information about the directory server in the root DSE, and LDAP schema definitions.

ACIs have a user DN subject, ldap:///anyone, that matches anonymous and authenticated users. This is used in some global ACIs as described in "Default Global ACIs" in the Administration Guide. It can also be used in ACI in the directory data. For explanations and examples, see "Configuring ACIs" in the Administration Guide.

OpenDJ servers make it possible to disable anonymous access as shown in "ACI: Disable Anonymous Access" in the Administration Guide.

When a client accesses the directory over HTTP, anonymous operations can be mapped either to a specific user identity or to an anonymous user (default) by using the HTTP Anonymous authorization mechanism for the HTTP endpoint, mentioned in "About Authentication Mechanisms".

9.3. Protecting Simple Binds

As described in "About Authentication Mechanisms", a simple bind in LDAP is name/password authentication, where the client application presents a bind DN/password combination, and the OpenDJ server checks that the password matches the password on the entry with the specified bind DN.

The LDAP connection transport layer must be secure for a simple bind. Otherwise, eavesdroppers can read the credentials.

OpenDJ servers provide two alternatives to secure the connection for a simple bind, both of which depend on certificates and public key infrastructure:

LDAPS

To support LDAP over SSL, OpenDJ servers have a separate connection handler that listens for traffic on a port dedicated to secure connections.

For detailed configuration instructions, see "LDAP Client Access Over SSL" in the Administration Guide.

LDAP with StartTLS

OpenDJ servers support using the StartTLS extended operation on a normal (cleartext) LDAP connection handler. In this case, the client application initiates the connection at the normal LDAP port, and then negotiates a secure connection.

For detailed configuration instructions, see "LDAP Client Access With Transport Layer Security" in the Administration Guide.

9.4. Configuring Password Policy

The directory server is often where passwords are stored, so that passwords can be managed safely and that password policy can be defined and managed centrally. This section covers how to configure password policies for an OpenDJ server.

9.4.1. About OpenDJ Password Policies

OpenDJ password policies govern not only passwords, but also account lockout, and how OpenDJ servers provide notification about account status.

OpenDJ servers support password policies as part of the server configuration, and subentry password policies as part of the (replicated) user data.

9.4.1.1. Server-Based Password Policies

You manage server-based password policies in the OpenDJ server configuration by using the dsconfig command. As they are part of the server configuration, such password policies are not replicated. You must instead apply password policy configuration updates to each replica in your deployment.

By default, an OpenDJ server includes two password policy configurations, one default for all users, and another default for directory root DN users, such as cn=Directory Manager. You can see all the default password policy settings by using the dsconfig command as follows:

$ dsconfig \
 get-password-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Default Password Policy" \
 --advanced \
 --trustAll \
 --no-prompt
Property                                  : Value(s)
------------------------------------------:------------------------------------
account-status-notification-handler       : -
allow-expired-password-changes            : false
allow-multiple-password-values            : false
allow-pre-encoded-passwords               : false
allow-user-password-changes               : true
default-password-storage-scheme           : Salted SHA-512
deprecated-password-storage-scheme        : -
expire-passwords-without-warning          : false
force-change-on-add                       : false
force-change-on-reset                     : false
grace-login-count                         : 0
idle-lockout-interval                     : 0 s
java-class                                : org.opends.server.core.PasswordPoli
                                          : cyFactory
last-login-time-attribute                 : -
last-login-time-format                    : -
lockout-duration                          : 0 s
lockout-failure-count                     : 0
lockout-failure-expiration-interval       : 0 s
max-password-age                          : 0 s
max-password-reset-age                    : 0 s
min-password-age                          : 0 s
password-attribute                        : userPassword
password-change-requires-current-password : false
password-expiration-warning-interval      : 5 d
password-generator                        : Random Password Generator
password-history-count                    : 0
password-history-duration                 : 0 s
password-validator                        : -
previous-last-login-time-format           : -
require-change-by-time                    : -
require-secure-authentication             : false
require-secure-password-changes           : false
skip-validation-for-administrators        : false
state-update-failure-policy               : reactive
  

For detailed descriptions of each property, see the Server Configuration Reference.

Notice that many capabilities are not set by default: no lockout, no password expiration, no multiple passwords, no password validator to check that passwords contain the appropriate mix of characters. This means that if you decide to use the directory to enforce password policy, you must configure at least the default password policy to meet your needs.

A few basic protections are configured by default. When you import LDIF with userPassword values, An OpenDJ directory server applies a one-way hash to the values before storing them. When a user provides a password value during a bind, for example, the server hashes the value provided and compares it with the stored value. This prevents even the directory manager from recovering the plain text value of a user's password:

$ ldapsearch \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --baseDN dc=example,dc=com \
 "(uid=bjensen)" \
 userpassword
dn: uid=bjensen,ou=People,dc=example,dc=com
userpassword: {SSHA512}<hash>
  

In addition, users can change their passwords provided that you have granted them access to do so. An OpenDJ directory server uses the userPassword attribute to store passwords by default, rather than the authPassword attribute, which is designed to store passwords hashed by the client application.

9.4.1.2. Subentry-Based Password Policies

You manage subentry password policies by adding the subentries alongside the user data. An OpenDJ directory server can therefore replicate subentry password policies. The advantages are that you only need to add them once, and that administrators of user data can edit subentry password policies without having directory administrator access.

Subentry password policies support the Internet-Draft Password Policy for LDAP Directories (version 09). A subentry password policy effectively overrides settings in the default password policy defined in the OpenDJ configuration. Settings not supported or not included in the subentry password policy are inherited from the default password policy.

"Subentry Policy Attributes vs. Server Properties" lists Internet-Draft password policy attributes that override the default password policy when you set them in the subentry:

Subentry Policy Attributes vs. Server Properties
Internet-Draft Policy AttributeOverrides This Server Policy Property
pwdAllowUserChangeallow-user-password-changes
pwdMustChangeforce-change-on-reset
pwdGraceAuthNLimitgrace-login-count
pwdLockoutDurationlockout-duration
pwdMaxFailurelockout-failure-count
pwdFailureCountIntervallockout-failure-expiration-interval
pwdMaxAgemax-password-age
pwdMinAgemin-password-age
pwdAttributepassword-attribute
pwdSafeModifypassword-change-requires-current-password
pwdExpireWarningpassword-expiration-warning-interval
pwdInHistorypassword-history-count

The following Internet-Draft password policy attributes are not taken into account by OpenDJ servers:

  • pwdCheckQuality, because OpenDJ servers have password validators. Set password validators to use in the default password policy, for example.

  • pwdMinLength, because this is handled by the length-based password validator. Configure this validator as part of the default password policy, for example.

  • pwdLockout, because OpenDJ servers can deduce whether lockout is configured based on the values of other lockout-related password policy attributes.

Values of the following properties are inherited from the default password policy for Internet-Draft based password policies:

  • account-status-notification-handlers

  • allow-expired-password-changes

  • allow-multiple-password-values

  • allow-pre-encoded-passwords

  • default-password-storage-schemes

  • deprecated-password-storage-schemes

  • expire-passwords-without-warning

  • force-change-on-add

  • idle-lockout-interval

  • last-login-time-attribute

  • last-login-time-format

  • max-password-reset-age

  • password-generator

  • password-history-duration

  • password-validators

  • previous-last-login-time-formats

  • require-change-by-time

  • require-secure-authentication

  • require-secure-password-changes

  • skip-validation-for-administrators

  • state-update-failure-policy

If you would rather specify password validators for your policy, you can configure password validators for a subentry password policy by adding the auxiliary object class pwdValidatorPolicy and setting the multi-valued attribute, ds-cfg-password-validator, to the DNs of the password validator configuration entries.

The following example shows a subentry password policy that references two password validator configuration entries. The Character Set password validator determines whether a proposed password is acceptable by checking whether it contains a sufficient number of characters from one or more user-defined character sets and ranges. The length-based password validator determines whether a proposed password is acceptable based on whether the number of characters it contains falls within an acceptable range of values. Both are enabled in the default OpenDJ server configuration:

dn: cn=Subentry Password Policy with Validators,dc=example,dc=com
objectClass: top
objectClass: subentry
objectClass: pwdPolicy
objectClass: pwdValidatorPolicy
cn: Subentry Password Policy with Validators
pwdAttribute: userPassword
pwdLockout: TRUE
pwdMaxFailure: 3
pwdFailureCountInterval: 300
pwdLockoutDuration: 300
pwdAllowUserChange: TRUE
pwdSafeModify: TRUE
ds-cfg-password-validator: cn=Character Set,cn=Password Validators,cn=config
ds-cfg-password-validator: cn=Length-Based Password Validator,
 cn=Password Validators,cn=config
subtreeSpecification: {base "ou=people", specificationFilter
  "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }

If a referenced password validator cannot be found, then the OpenDJ server logs an error message when the password policy is invoked. This can occur, for example, when a subentry password policy is replicated to a directory server where the password validator is not (yet) configured. In that case, when a user attempts to change their password, the server fails to find the referenced password validator.

See also "To Create a Subentry-Based Password Policy".

9.4.1.3. Which Password Policy Applies

The password policy that applies to a user is identified by the operational attribute, pwdPolicySubentry. The default global access control instructions prevent this operational attribute from being visible to normal users. The following example gives access to administrators:

$ cat manage-pwp.ldif
dn: ou=People,dc=example,dc=com
changetype: modify
add: aci
aci: (targetattr = "pwdPolicySubentry||ds-pwp-password-policy-dn")
 (version 3.0;acl "Allow Administrators to manage user's password policy";
 allow (all) (groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com");)

$ ldapmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 manage-pwp.ldif
$ ldapsearch \
 --port 1389 \
 --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
 --bindPassword bribery \
 --baseDN dc=example,dc=com \
 "(uid=bjensen)" \
 pwdPolicySubentry
dn: uid=bjensen,ou=People,dc=example,dc=com
pwdPolicySubentry: cn=Default Password Policy,cn=Password Policies,cn=config
  

9.4.2. Configuring Password Policies

You configure server-based password policies by using the dsconfig command. Notice that server-based password policies are part of the server configuration, and therefore not replicated. Alternatively, you can configure a subset of password policy features by using subentry-based password policies that are stored with the replicated server data.

To Adjust the Default Password Policy

You can reconfigure the default password policy, for example, to check that passwords do not contain complete attribute values, and to prevent password reuse. The default policy is a server-based password policy.

  1. Apply the changes to the default password policy:

    $ dsconfig \
     set-password-policy-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --policy-name "Default Password Policy" \
     --set password-history-count:7 \
     --set password-validator:Attribute\ Value \
     --trustAll \
     --no-prompt
       
  2. Check your work:

    $ dsconfig \
     get-password-policy-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --policy-name "Default Password Policy" \
     --trustAll
    Property                                  : Value(s)
    ------------------------------------------:--------------------------
    account-status-notification-handler       : -
    allow-expired-password-changes            : false
    allow-user-password-changes               : true
    default-password-storage-scheme           : Salted SHA-512
    deprecated-password-storage-scheme        : -
    expire-passwords-without-warning          : false
    force-change-on-add                       : false
    force-change-on-reset                     : false
    grace-login-count                         : 0
    idle-lockout-interval                     : 0 s
    last-login-time-attribute                 : -
    last-login-time-format                    : -
    lockout-duration                          : 0 s
    lockout-failure-count                     : 0
    lockout-failure-expiration-interval       : 0 s
    max-password-age                          : 0 s
    max-password-reset-age                    : 0 s
    min-password-age                          : 0 s
    password-attribute                        : userPassword
    password-change-requires-current-password : false
    password-expiration-warning-interval      : 5 d
    password-generator                        : Random Password Generator
    password-history-count                    : 7
    password-history-duration                 : 0 s
    password-validator                        : Attribute Value
    previous-last-login-time-format           : -
    require-change-by-time                    : -
    require-secure-authentication             : false
    require-secure-password-changes           : false
       
  3. Test changes to the default password policy.

    For example, the following tests demonstrate how the attribute value password validator works. The attribute value password validator rejects a new password when the password is contained in attribute values on the user's entry.

    By default, the attribute value password validator checks all attributes, checks whether portions of the password string match attribute values, where the portions are strings of length 5, and checks the reverse of the password as well:

    $ dsconfig \
     get-password-validator-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --validator-name Attribute\ Value \
     --trustAll \
     --no-prompt
    Property               : Value(s)
    -----------------------:---------
    check-substrings       : true
    enabled                : true
    match-attribute        : -
    min-substring-length   : 5
    test-reversed-password : true
       

    Consider the attributes present on Babs Jensen's entry:

    $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)"
    dn: uid=bjensen,ou=People,dc=example,dc=com
    objectClass: top
    objectClass: inetOrgPerson
    objectClass: posixAccount
    objectClass: organizationalPerson
    objectClass: person
    mail: bjensen@example.com
    roomNumber: 0209
    preferredLanguage: en, ko;q=0.8
    manager: uid=trigden, ou=People, dc=example,dc=com
    ou: Product Development
    ou: People
    givenName: Barbara
    telephoneNumber: +1 408 555 1862
    sn: Jensen
    cn: Barbara Jensen
    cn: Babs Jensen
    homeDirectory: /home/bjensen
    facsimileTelephoneNumber: +1 408 555 1992
    gidNumber: 1000
    uidNumber: 1076
    description: Original description
    uid: bjensen
    l: San Francisco
    departmentNumber: 3001
    street: 201 Mission Street Suite 2900
       

    Using the attribute value password validator, passwords like bjensen12 and babsjensenspwd are not valid because substrings of the password match complete attribute values:

    $ ldappasswordmodify \
     --port 1389 \
     --authzID "dn:uid=bjensen,ou=people,dc=example,dc=com" \
     --currentPassword hifalutin \
     --newPassword bjensen12
    The LDAP password modify operation failed: 19 (Constraint Violation)
    Additional Information:  The provided new password failed the validation
    checks defined in the server: The provided password was found in another
    attribute in the user entry
    
    $ ldappasswordmodify \
     --port 1389 \
     --authzID "dn:uid=bjensen,ou=people,dc=example,dc=com" \
     --currentPassword hifalutin \
     --newPassword babsjensenspwd
    The LDAP password modify operation failed: 19 (Constraint Violation)
    Additional Information:  The provided new password failed the validation
    checks defined in the server: The provided password was found in another
    attribute in the user entry
       

    The attribute value password validator does not check, however, whether the password contains substrings of attribute values:

    $ ldappasswordmodify \
     --port 1389 \
     --authzID "dn:uid=bjensen,ou=people,dc=example,dc=com" \
     --currentPassword hifalutin \
     --newPassword babsp4ssw0rd
    The LDAP password modify operation was successful
    
    $ ldappasswordmodify \
     --port 1389 \
     --authzID "dn:uid=bjensen,ou=people,dc=example,dc=com" \
     --currentPassword babsp4ssw0rd \
     --newPassword example.com
    The LDAP password modify operation was successful
       

    To avoid the problem of the latter example, you could use a dictionary password validator where the dictionary includes example.com. For an example using a dictionary password validator, see "To Configure the Default Policy to Meet NIST Requirements".

To Create a Server-Based Password Policy

You can add a password policy, for example, for new users who have not yet used their credentials to bind.

  1. Create the new password policy:

    $ dsconfig \
     create-password-policy \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --policy-name "New Account Password Policy" \
     --set default-password-storage-scheme:"Salted SHA-512" \
     --set force-change-on-add:true \
     --set password-attribute:userPassword \
     --type password-policy \
     --trustAll \
     --no-prompt
       
  2. Check your work:

    $ dsconfig \
     get-password-policy-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --policy-name "New Account Password Policy" \
     --trustAll
    Property                                  : Value(s)
    ------------------------------------------:---------------
    account-status-notification-handler       : -
    allow-expired-password-changes            : false
    allow-user-password-changes               : true
    default-password-storage-scheme           : Salted SHA-512
    deprecated-password-storage-scheme        : -
    expire-passwords-without-warning          : false
    force-change-on-add                       : true
    force-change-on-reset                     : false
    grace-login-count                         : 0
    idle-lockout-interval                     : 0 s
    last-login-time-attribute                 : -
    last-login-time-format                    : -
    lockout-duration                          : 0 s
    lockout-failure-count                     : 0
    lockout-failure-expiration-interval       : 0 s
    max-password-age                          : 0 s
    max-password-reset-age                    : 0 s
    min-password-age                          : 0 s
    password-attribute                        : userPassword
    password-change-requires-current-password : false
    password-expiration-warning-interval      : 5 d
    password-generator                        : -
    password-history-count                    : 0
    password-history-duration                 : 0 s
    password-validator                        : -
    previous-last-login-time-format           : -
    require-change-by-time                    : -
    require-secure-authentication             : false
    require-secure-password-changes           : false
       

    If you use a password policy like this, then you will want to change the user's policy again when the new user successfully updates the password. For instructions on assigning a server-based password policy, see "To Assign a Password Policy to a User".

To Create a Subentry-Based Password Policy

You can add a subentry to configure a password policy that applies to Directory Administrators.

  1. Create the entry that specifies the password policy:

    $ cat subentry-password-policy.ldif
    dn: cn=Subentry Password Policy with Validators,dc=example,dc=com
    objectClass: top
    objectClass: subentry
    objectClass: pwdPolicy
    objectClass: pwdValidatorPolicy
    cn: Subentry Password Policy with Validators
    pwdAttribute: userPassword
    pwdLockout: TRUE
    pwdMaxFailure: 3
    pwdFailureCountInterval: 300
    pwdLockoutDuration: 300
    pwdAllowUserChange: TRUE
    pwdSafeModify: TRUE
    ds-cfg-password-validator: cn=Character Set,cn=Password Validators,cn=config
    ds-cfg-password-validator: cn=Length-Based Password Validator,
     cn=Password Validators,cn=config
    subtreeSpecification: {base "ou=people", specificationFilter
      "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }
    
    
       
  2. Add the policy to the directory:

    $ ldapmodify \
     --hostname opendj.example.com \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     subentry-password-policy.ldif
       
  3. Check that the policy applies as specified.

    In this example, the policy should apply to a Directory Administrator, while a normal user has the default password policy. Here, Kirsten Vaughan is a member of the Directory Administrators group, and Babs Jensen is not a member:

    $ ldapsearch \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --baseDN dc=example,dc=com \
     "(uid=kvaughan)" \
     pwdPolicySubentry
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    pwdPolicySubentry: cn=Subentry Password Policy with Validators,dc=example,dc=com
    
    $ ldapsearch \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --baseDN dc=example,dc=com \
     "(uid=bjensen)" \
     pwdPolicySubentry
    dn: uid=bjensen,ou=People,dc=example,dc=com
    pwdPolicySubentry: cn=Default Password Policy,cn=Password Policies,cn=config
       

9.4.3. Assigning Password Policies

You assign subentry-based password policies for a subtree of the DIT by adding the policy to an LDAP subentry whose immediate superior is the root of the subtree. In other words, you can add the subentry-based password policy under ou=People,dc=example,dc=com to have it apply to all entries under ou=People,dc=example,dc=com. You can also use the capabilities of LDAP subentries to refine the scope of application.

You assign server-based password policies by using the ds-pwp-password-policy-dn attribute.

"Server-Based and Subentry Password Policies" compares the types of password policy.

Server-Based and Subentry Password Policies
Server-Based and Subentry Password Policies

To Assign a Password Policy to a User
  1. Give administrators the right to manage users' password policies:

    $ cat manage-pwp.ldif
    dn: ou=People,dc=example,dc=com
    changetype: modify
    add: aci
    aci: (targetattr = "pwdPolicySubentry||ds-pwp-password-policy-dn")
     (version 3.0;acl "Allow Administrators to manage user's password policy";
     allow (all) (groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com");)
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     manage-pwp.ldif
       

    Notice here that the root DN user cn=Directory Manager assigns privileges to Kirsten Vaughan. Any administrator with the privilege-change privilege can assign other privileges. Assuming the administrator can update administrator privileges, they can assign themselves the bypass-acl privilege. Then they are no longer bound by access control instructions, including both user data ACIs and global ACIs. For this reason, avoid assigning the privilege-change privilege to normal administrator users.

  2. Update the user's ds-pwp-password-policy-dn attribute:

    $ cat newuser.ldif
    dn: uid=newuser,ou=People,dc=example,dc=com
    uid: newuser
    objectClass: person
    objectClass: organizationalPerson
    objectClass: inetOrgPerson
    objectClass: top
    cn: New User
    sn: User
    ou: People
    mail: newuser@example.com
    userPassword: changeme
    ds-pwp-password-policy-dn: cn=New Account Password Policy,cn=Password Policies,cn=config
    
    $ ldapmodify \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     newuser.ldif
       
  3. Check your work:

    $ ldapsearch \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     --baseDN dc=example,dc=com \
     "(uid=newuser)" \
     pwdPolicySubentry
    dn: uid=newuser,ou=People,dc=example,dc=com
    pwdPolicySubentry: cn=New Account Password Policy,cn=Password Policies,cn=config
       
To Assign a Password Policy to a Group

You can use a collective attribute to assign a password policy:

  1. Give an administrator the privilege to write subentries, such as those used for setting collective attributes:

    $ cat subentry-write.ldif
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    changetype: modify
    add: ds-privilege-name
    ds-privilege-name: subentry-write
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     subentry-write.ldif
       

    Notice here that the root DN user cn=Directory Manager assigns privileges to Kirsten Vaughan. Any administrator with the privilege-change privilege can assign other privileges. Assuming the administrator can update administrator privileges, they can assign themselves the bypass-acl privilege. Then they are no longer bound by access control instructions, including both user data ACIs and global ACIs. For this reason, avoid assigning the privilege-change privilege to normal administrator users.

  2. Create a subentry defining the collective attribute that sets the ds-pwp-password-policy-dn attribute for group members' entries:

    $ cat pwp-coll.ldif
    dn: cn=Password Policy for Dir Admins,dc=example,dc=com
    objectClass: collectiveAttributeSubentry
    objectClass: extensibleObject
    objectClass: subentry
    objectClass: top
    cn: Password Policy for Dir Admins
    ds-pwp-password-policy-dn;collective: cn=Root Password Policy,cn=Password Policies,cn=config
    subtreeSpecification: { base "ou=People", specificationFilter
      "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)"}
    
    $ ldapmodify \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     pwp-coll.ldif
       
  3. Check your work:

    $ ldapsearch \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     --baseDN dc=example,dc=com \
     "(uid=kvaughan)" \
     pwdPolicySubentry
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    pwdPolicySubentry: cn=Root Password Policy,cn=Password Policies,cn=config
       
To Assign Password Policy for an Entire Branch

A password policy subentry password policy to assign the policy to the entries under a base DN:

  1. Give an administrator the privilege to write subentries, such as those used for setting password policies:

    $ cat subentry-write.ldif
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    changetype: modify
    add: ds-privilege-name
    ds-privilege-name: subentry-write
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     subentry-write.ldif
       

    Notice here that the root DN user cn=Directory Manager assigns privileges to Kirsten Vaughan. Any administrator with the privilege-change privilege can assign other privileges. Assuming the administrator can update administrator privileges, they can assign themselves the bypass-acl privilege. Then they are no longer bound by access control instructions, including both user data ACIs and global ACIs. For this reason, avoid assigning the privilege-change privilege to normal administrator users.

  2. Create a password policy with a subtreeSpecification to assign the policy to all entries under a base DN.

    The following example creates a password policy for entries under ou=People,dc=example,dc=com:

    $ cat people-pwp.ldif
    dn: cn=People Password Policy,dc=example,dc=com
    objectClass: top
    objectClass: subentry
    objectClass: pwdPolicy
    cn: People Password Policy
    pwdAttribute: userPassword
    pwdLockout: TRUE
    pwdMaxFailure: 3
    pwdFailureCountInterval: 300
    pwdLockoutDuration: 300
    pwdAllowUserChange: TRUE
    pwdSafeModify: TRUE
    subtreeSpecification: { base "ou=people" }
    
    $ ldapmodify \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     people-pwp.ldif
       

    Notice the subtree specification used to assign the policy, { base "ou=people" }. You can relax the subtree specification value to {} to apply the password policy to all sibling entries (all entries under dc=example,dc=com), or further restrict the subtree specification by adding a specificationFilter. See "Collective Attributes" in the Developer's Guide for more information.

  3. Check your work:

    $ ldapsearch \
     --port 1389 \
     --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
     --bindPassword bribery \
     --baseDN dc=example,dc=com \
     "(uid=alutz)" \
     pwdPolicySubentry
    dn: uid=alutz,ou=People,dc=example,dc=com
    pwdPolicySubentry: cn=People Password Policy,dc=example,dc=com
       

    If everything is correctly configured, then the password policy should be assigned to users whose entries are under ou=People,dc=example,dc=com.

9.5. Enforcing Strong Passwords and Strong Password Storage

OpenDJ servers provide flexible password validation to fit your policies about password content and to reject weak passwords when users try to save them. It also provides a variety of one-way and reversible password storage schemes. Password strength is a function both of password minimum length, which you can set as part of password policy described in "Configuring Password Policy", and of password quality, which requires password validation. This section covers password validation for enforcing strong passwords, and protecting stored passwords with password storage schemes.

9.5.1. Configuring Password Validation

Password validators, described in the Server Configuration Reference, are responsible for determining whether a proposed password is acceptable for use. Validators can run checks like ensuring that the password meets minimum length requirements, that it has an appropriate range of characters, or that it is not in the history of recently used passwords.

The following example lists password validators, including validators created in earlier examples:

$ dsconfig \
 list-password-validators \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --trustAll \
 --no-prompt
Password Validator                  : Type                : enabled
------------------------------------:---------------------:--------
At least 8 characters               : length-based        : true
Attribute Value                     : attribute-value     : true
Character Set                       : character-set       : true
Common passwords                    : dictionary          : true
Dictionary                          : dictionary          : false
Length-Based Password Validator     : length-based        : true
Repeated Characters                 : repeated-characters : true
Similarity-Based Password Validator : similarity-based    : true
Unique Characters                   : unique-characters   : true
 

The password policy for a user specifies the set of password validators that should be used whenever that user provides a new password. By default, no password validators are configured. You can see an example setting the Default Password Policy to use the Dictionary validator in "To Adjust the Default Password Policy". The following example shows how to set up a custom password validator and assign it to the default password policy.

The custom password validator ensures passwords meet at least three of the following four criteria. Passwords are composed of the following:

  • English lowercase characters (a through z)

  • English uppercase characters (A through Z)

  • Base 10 digits (0 through 9)

  • Non-alphabetic characters (for example, !, $, #, %)

Notice how the character-set values are constructed. The initial 0: means the set is optional, whereas 1: means the set is required:

$ dsconfig \
 create-password-validator \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --validator-name "Custom Character Set Password Validator" \
 --set allow-unclassified-characters:true \
 --set enabled:true \
 --set character-set:0:abcdefghijklmnopqrstuvwxyz \
 --set character-set:0:ABCDEFGHIJKLMNOPQRSTUVWXYZ \
 --set character-set:0:0123456789 \
 --set character-set:0:\!\"#\$%\&\'\(\)\*+\,-./:\;\\\<=\>\?@\[\]\^_\`\{\|\}~ \
 --set min-character-sets:3 \
 --type character-set \
 --trustAll \
 --no-prompt
$ dsconfig \
 set-password-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Default Password Policy" \
 --set password-validator:"Custom Character Set Password Validator" \
 --trustAll \
 --no-prompt
$ ldappasswordmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --authzID "u:bjensen" \
 --newPassword '!ABcd$%^'
 

In the preceding example, the character set of ASCII punctuation, \!\"#\$%\&\'\(\)\*+\,-./:\;\\\<=\>\?@\[\]\^_\`\{\|\}~, is hard to read because of all of the escape characters. It is equivalent to !"#$%&'()*+,-./:;\<=>?@[]^_`{|}~. To enter sequences sequences that are difficult to escape properly, use the dsconfig in interactive mode, and let it do the escaping for you. You can also use the --commandFilePath {path} option to save the result of your interactive session to a file for later use in scripts.

An attempt to set an invalid password fails as shown in the following example:

$ ldappasswordmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --authzID "u:bjensen" \
 --newPassword hifalutin
The LDAP password modify operation failed with result code 19
Error Message:  The provided new password failed the validation checks defined
in the server: The provided password did not contain characters from at least
3 of the following character sets or ranges: '0123456789',
'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz',
'!"#$%&'()*+,-./:;\<=>?@[]^_`{|}~'
 

Validation does not affect existing passwords, but only takes effect when the password is updated.

You can reference password validators from subentry password policies. See "Subentry-Based Password Policies" for an example.

9.5.2. Configuring Password Storage

Password storage schemes, described in the Server Configuration Reference, encode new passwords provided by users so that they are stored in an encoded manner. This makes it difficult or impossible to determine the cleartext passwords from the encoded values. Password storage schemes also determine whether a cleartext password provided by a client matches the encoded value stored by the server.

OpenDJ servers offer a variety of reversible and one-way password storage schemes. With a reversible encryption scheme, an attacker who gains access to the server can recover the cleartext passwords. With a one-way hash storage scheme, the attacker who gains access to the server must still crack the password by brute force, encoding passwords over and over to generate guesses until a match is found. If you have a choice, use a one-way password storage scheme.

Some one-way hash functions are not designed specifically for password storage, but also for use in message authentication and digital signatures. Such functions, like those defined in the Secure Hash Algorithm (SHA-1 and SHA-2) standards, are designed for high performance. Because they are fast, they allow the server to perform authentication at high throughput with low response times. However, high-performance algorithms also help attackers use brute force techniques. One estimate in 2017 is that a single GPU can calculate over one billion SHA-512 hashes per second.

Warning

Some one-way hash functions are designed to be computationally expensive. Such functions, like PBKDF2 and Bcrypt, are designed to be relatively slow even on modern hardware. This makes them generally less susceptible to brute force attacks. However, computationally expensive functions reduce authentication throughput and increase response times. With the default number of iterations, the GPU mentioned above might only calculate 100,000 PBKDF2 hashes per second (or 0.01% of the corresponding hashes calculated with SHA-512). If you use these functions, be aware of the potentially dramatic performance impact and plan your deployment accordingly. Do not use functions like Bcrypt for any accounts that are used for frequent, short-lived connections.

$ dsconfig \
 list-password-storage-schemes \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --trustAll
Password Storage Scheme : Type          : enabled
------------------------:---------------:--------
3DES                    : triple-des    : true
AES                     : aes           : true
Base64                  : base64        : true
Bcrypt                  : bcrypt        : true
Blowfish                : blowfish      : true
Clear                   : clear         : true
CRYPT                   : crypt         : true
MD5                     : md5           : true
PBKDF2                  : pbkdf2        : true
PKCS5S2                 : pkcs5s2       : true
RC4                     : rc4           : true
Salted MD5              : salted-md5    : true
Salted SHA-1            : salted-sha1   : true
Salted SHA-256          : salted-sha256 : true
Salted SHA-384          : salted-sha384 : true
Salted SHA-512          : salted-sha512 : true
SHA-1                   : sha1          : true
 

As shown in "To Adjust the Default Password Policy", the default password storage scheme for users is Salted SHA-512. When you add users or import user entries with userPassword values in cleartext, an OpenDJ server hashes them with the default password storage scheme. Root DN users have a different password policy by default, shown in "To Assign a Password Policy to a Group". The Root Password Policy uses PBKDF2 by default.

Tip

The choice of default password storage scheme for normal users can significantly impact server performance. Each time a normal user authenticates using simple bind (username/password) credentials, the directory server encodes the user's password according to the storage scheme in order to compare it with the encoded value in the user's entry.

Schemes such as Salted SHA-512 call for relatively high-performance encoding. Schemes such as PBKDF2, which are designed to make the encoding process computationally expensive, reduce the bind throughput that can be achieved on equivalent hardware.

Take this performance impact into consideration when choosing a password storage scheme. If you opt for a scheme such as PBKDF2, make sure the directory service has enough compute power to absorb the additional load.

The password storage schemes listed in "Additional Password Storage Scheme Settings" have additional configuration settings.

Additional Password Storage Scheme Settings
SchemeSettingDescription

Bcrypt

bcrypt-cost

The cost parameter specifies a key expansion iteration count as a power of two.

A default value of 12 (212 iterations) is considered in 2016 as a reasonable balance between responsiveness and security for regular users.

Crypt

crypt-password-storage-encryption-algorithm

Specifies the crypt algorithm to use to encrypt new passwords.

The following values are supported:

unix

The password is encrypted with the weak Unix crypt algorithm.

This is the default setting.

md5

The password is encrypted with the BSD MD5 algorithm and has a $1$ prefix.

sha256

The password is encrypted with the SHA256 algorithm and has a $5$ prefix.

sha512

The password is encrypted with the SHA512 algorithm and has a $6$ prefix.

PBKDF2

pbkdf2-iterations

The number of algorithm iterations. NIST recommends at least 1000.

The default is 10000.


You change the default password policy storage scheme for users by changing the applicable password policy, as shown in the following example:

$ dsconfig \
 set-password-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Default Password Policy" \
 --set default-password-storage-scheme:pbkdf2 \
 --trustAll \
 --no-prompt
 

Notice that the change in default password storage scheme does not cause the OpenDJ server to update any stored password values. By default, the server only stores a password with the new storage scheme the next time that the password is changed.

OpenDJ servers prefix passwords with the scheme used to encode them, which means it is straightforward to see which password storage scheme is used. After the default password storage scheme is changed to PBKDF2, old user passwords remain encoded with Salted SHA-512:

$ ldapsearch \
 --port 1389 \
 --bindDN uid=bjensen,ou=people,dc=example,dc=com \
 --bindPassword hifalutin \
 --baseDN dc=example,dc=com \
 "(uid=bjensen)" \
 userPassword
dn: uid=bjensen,ou=People,dc=example,dc=com
userPassword: {SSHA512}<hash>
 

When the password is changed, the new default password storage scheme takes effect, as shown in the following example:

$ ldappasswordmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --authzID "u:bjensen" \
 --newPassword changeit
The LDAP password modify operation was successful
$ ldapsearch \
 --port 1389 \
 --bindDN uid=bjensen,ou=people,dc=example,dc=com \
 --bindPassword changeit \
 --baseDN dc=example,dc=com \
 "(uid=bjensen)" \
 userPassword
dn: uid=bjensen,ou=People,dc=example,dc=com
userPassword: {PBKDF2}10000:<hash>
 

When you change the password storage scheme for users, realize that the user passwords must change in order for the OpenDJ server to encode them with the chosen storage scheme. If you are changing the storage scheme because the old scheme was too weak, then you no doubt want users to change their passwords anyway.

If, however, the storage scheme change is not related to vulnerability, you can use the deprecated-password-storage-scheme property of the password policy to have the OpenDJ server store the password in the new format after successful authentication. This makes it possible to do password migration for active users without forcing users to change their passwords:

$ ldapsearch \
 --port 1389 \
 --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
 --bindPassword bribery \
 --baseDN dc=example,dc=com \
 "(uid=kvaughan)" \
 userPassword
dn: uid=kvaughan,ou=People,dc=example,dc=com
userPassword: {SSHA512}<hash>
$ dsconfig \
 set-password-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Default Password Policy" \
 --set deprecated-password-storage-scheme:"Salted SHA-1" \
 --trustAll \
 --no-prompt
$ ldapsearch \
 --port 1389 \
 --bindDN uid=kvaughan,ou=people,dc=example,dc=com \
 --bindPassword bribery \
 --baseDN dc=example,dc=com \
 "(uid=kvaughan)" \
 userPassword
dn: uid=kvaughan,ou=People,dc=example,dc=com
userPassword: {PBKDF2}10000:<hash>
 

Notice that with deprecated-password-storage-scheme set appropriately, Kirsten Vaughan's password was hashed again after she authenticated successfully.

9.6. Authenticating Client Applications With a Certificate

One alternative to simple binds with user name/password combinations consists of storing a digital certificate on the user entry, and using the certificate as credentials during the bind. You can use this mechanism, for example, to let applications bind without using passwords.

By setting up a secure connection with a certificate, the client is in effect authenticating to the server. The server must close the connection if it cannot trust the client certificate. However, in the process of establishing a secure connection, it does not identify the client to the OpenDJ server, because the secure connection is established by the JVM at the transport layer, independently of the LDAP protocol.

When binding with a certificate, the client must request the SASL External mechanism by which the OpenDJ server maps the certificate to the client entry in the directory. When it finds a match, the OpenDJ server sets the authorization identity for the connection to that of the client, and the bind is successful.

For the whole process of authenticating with a certificate to work smoothly, the OpenDJ server and the client must trust each others' certificates, the client certificate must be stored on the client entry in the directory, and the OpenDJ server must be configured to map the certificate to the client entry.

To Add Certificate Information to an Entry

Before you try to bind to an OpenDJ server using a certificate, create a certificate, and add the certificate attributes to the entry.

Example.ldif includes an entry for cn=My App,ou=Apps,dc=example,dc=com. Examples in this section use that entry, and use the Java keytool command to manage the certificate:

  1. Create a certificate using the DN of the client entry as the dname string:

    $ keytool \
     -genkeypair \
     -alias myapp-cert \
     -dname "cn=My App,ou=Apps,dc=example,dc=com" \
     -keystore /path/to/my-keystore \
     -storepass changeit \
     -keypass changeit
       
  2. Get the certificate signed.

    If you cannot get the certificate signed by a CA, self-sign the certificate:

    $ keytool \
     -selfcert \
     -alias myapp-cert \
     -validity 7300 \
     -keystore /path/to/my-keystore \
     -storepass changeit \
     -keypass changeit
       
  3. Export the certificate to a file in binary format:

    $ keytool \
     -export \
     -alias myapp-cert \
     -keystore /path/to/my-keystore \
     -storepass changeit \
     -keypass changeit \
     -file /path/to/myapp-cert.crt
    Certificate stored in file </path/to/myapp-cert.crt>
       
  4. Make note of the certificate MD5 fingerprint.

    Later in this procedure you update the client application entry with the MD5 fingerprint, referred to henceforth as MD5_FINGERPRINT:

    $ keytool \
     -list \
     -v \
     -alias myapp-cert \
     -keystore /path/to/my-keystore \
     -storepass changeit | awk '/MD5/{print $2}'
    MD5_FINGERPRINT
       
  5. Modify the entry to add attributes related to the certificate.

    By default, you need the userCertificate value.

    If you want the server to map the certificate to its fingerprint, use the ds-certificate-fingerprint attribute. This example uses the MD5 fingerprint, which corresponds to the default setting for the fingerprint certificate mapper.

    If you want to map the certificate subject DN to an attribute of the entry, use the ds-certificate-subject-dn attribute:

    $ cat addcert.ldif
    dn: cn=My App,ou=Apps,dc=example,dc=com
    changetype: modify
    add: objectclass
    objectclass: ds-certificate-user
    -
    add: ds-certificate-fingerprint
    ds-certificate-fingerprint: MD5_FINGERPRINT
    -
    add: ds-certificate-subject-dn
    ds-certificate-subject-dn: CN=My App, OU=Apps, DC=example, DC=com
    -
    add: userCertificate;binary
    userCertificate;binary:<file:///path/to/myapp-cert.crt
    
    $ ldapmodify \
     --hostname opendj.example.com \
     --port 1389 \
     --bindDN uid=kvaughan,ou=People,dc=example,dc=com \
     --bindPassword bribery \
     addcert.ldif
       
  6. Check your work:

    $ ldapsearch \
     --hostname opendj.example.com \
     --port 1389 \
     --baseDN dc=example,dc=com \
     "(cn=My App)"
    dn: cn=My App,ou=Apps,dc=example,dc=com
    ds-certificate-fingerprint: MD5_FINGERPRINT
    userCertificate;binary:: ENCODED_CERT
    objectClass: person
    objectClass: inetOrgPerson
    objectClass: organizationalPerson
    objectClass: ds-certificate-user
    objectClass: top
    ds-certificate-subject-dn: CN=My App, OU=Apps, DC=example, DC=com
    cn: My App
    sn: App
       
  7. When using a self-signed certificate, import the client certificate into the server truststore.

    When the client presents its certificate to an OpenDJ server, by default the server must trust the client certificate before it can accept the connection. If the OpenDJ server cannot trust the client certificate, it cannot establish a secure connection:

    $ keytool \
     -import \
     -alias myapp-cert \
     -file /path/to/myapp-cert.crt \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -noprompt
    Certificate was added to keystore
       
  8. When using a certificate signed by a CA whose certificate is not delivered with the Java runtime environment, import the CA certificate into the Java runtime environment truststore, or into the server truststore as shown in the following example:

    $ keytool \
     -import \
     -alias ca-cert \
     -file ca.crt \
     -keystore /path/to/opendj/config/keystore \
     -storetype PKCS12 \
     -storepass:file /path/to/opendj/config/keystore.pin \
     -noprompt
    Certificate was added to keystore
       
  9. If you updated the truststore to add a certificate, restart the server to make sure that it reads the updated truststore and recognizes the certificate:

    $ stop-ds --restart --quiet
       
To Configure Certificate Mappers

An OpenDJ server uses certificate mappers during binds to establish a mapping between a client certificate and the entry that corresponds to that certificate. The certificate mappers shipped with an OpenDJ server include the following:

Fingerprint Certificate Mapper

Looks for the MD5 (default) or SHA-1 certificate fingerprint in an attribute of the entry (default: ds-certificate-fingerprint).

Subject Attribute To User Attribute Mapper

Looks for a match between an attribute of the certificate subject and an attribute of the entry (default: match cn in the certificate to cn on the entry, or match emailAddress in the certificate to mail on the entry).

Subject DN to User Attribute Certificate Mapper

Looks for the certificate subject DN in an attribute of the entry (default: ds-certificate-subject-dn).

Subject Equals DN Certificate Mapper

Looks for an entry whose DN matches the certificate subject DN.

If the default configurations for the certificate mappers are acceptable, you do not need to change them. They are enabled by default.

The following steps demonstrate how to change the Fingerprint Mapper default algorithm of MD5 to SHA1:

  1. List the certificate mappers to retrieve the correct name:

    $ dsconfig \
     list-certificate-mappers \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --trustAll \
     --no-prompt
    Certificate Mapper                  : Type                                : enabled
    ------------------------------------:-------------------------------------:--------
    Fingerprint Mapper                  : fingerprint                         : true
    Subject Attribute to User Attribute : subject-attribute-to-user-attribute : true
    Subject DN to User Attribute        : subject-dn-to-user-attribute        : true
    Subject Equals DN                   : subject-equals-dn                   : true
       
  2. Examine the current configuration:

    $ dsconfig \
     get-certificate-mapper-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --mapper-name "Fingerprint Mapper" \
     --trustAll \
     --no-prompt
    Property              : Value(s)
    ----------------------:---------------------------
    enabled               : true
    fingerprint-algorithm : md5
    fingerprint-attribute : ds-certificate-fingerprint
    user-base-dn          : -
       
  3. Change the configuration as necessary:

    $ dsconfig \
     set-certificate-mapper-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --mapper-name "Fingerprint Mapper" \
     --set fingerprint-algorithm:sha1 \
     --trustAll \
     --no-prompt
       
  4. Set the External SASL Mechanism Handler to use the appropriate certificate mapper (default: Subject Equals DN).

    Client applications use the SASL External mechanism during the bind to have the OpenDJ server set the authorization identifier based on the entry that matches the client certificate:

    $ dsconfig \
     set-sasl-mechanism-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name External \
     --set certificate-mapper:"Fingerprint Mapper" \
     --trustAll \
     --no-prompt
       
Authenticating With Client Certificates

Instead of providing a bind DN and password as for simple authentication, use the SASL EXTERNAL authentication mechanism, and provide the certificate. As a test with example data, you can try an anonymous search, then try with certificate-based authentication.

Before you try this example, make sure the OpenDJ server is set up to accept StartTLS from clients, and that you have set up the client certificate as described above. Next, create a password PIN file for your client key store:

$ touch /path/to/my-keystore.pin
$ chmod 600 /path/to/my-keystore.pin
# Add the PIN (changeit) in cleartext on first and only line in the file:
$ vi /path/to/my-keystore.pin
  

Also, if an OpenDJ server uses a certificate for StartTLS that was not signed by a well-known CA, import the appropriate certificate into the client keystore, which can then double as a truststore. For example, if an OpenDJ server uses a self-signed certificate, import the server certificate into the keystore:

$ keytool \
 -export \
 -alias server-cert \
 -file server-cert.crt \
 -keystore /path/to/opendj/config/keystore \
 -storepass:file /path/to/opendj/config/keystore.pin \
 -storetype PKCS12
$ keytool \
 -import \
 -trustcacerts \
 -alias server-cert \
 -file server-cert.crt \
 -keystore /path/to/my-keystore \
 -storepass:file /path/to/my-keystore.pin \
 -noprompt
  

If an OpenDJ server uses a CA-signed certificate, but the CA is not well-known, import the CA certificate into your keystore:

$ keytool \
 -import \
 -trustcacerts \
 -alias ca-cert \
 -file ca-cert.crt \
 -keystore /path/to/my-keystore \
 -storepass:file /path/to/my-keystore.pin
  

Now that you can try the example, notice that an OpenDJ server does not return the userPassword value for an anonymous search:

$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --useStartTLS \
 --trustStorePath /path/to/my-keystore \
 --trustStorePasswordFile /path/to/my-keystore.pin \
 "(cn=My App)" \
 userPassword
dn: cn=My App,ou=Apps,dc=example,dc=com
  

An OpenDJ server does let users read the values of their own userPassword attributes after they bind successfully:

$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --useStartTLS \
 --saslOption mech="EXTERNAL" \
 --certNickName myapp-cert \
 --keyStorePath /path/to/my-keystore \
 --keyStorePasswordFile /path/to/my-keystore.pin \
 --trustStorePath /path/to/my-keystore \
 --trustStorePasswordFile /path/to/my-keystore.pin \
 "(cn=My App)" \
 userPassword
dn: cn=My App,ou=Apps,dc=example,dc=com
userPassword: {SSHA512}<hash>
  

You can also try the same test with other certificate mappers.

This example uses the fingerprint mapper:

$ dsconfig \
 set-sasl-mechanism-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name External \
 --set certificate-mapper:"Fingerprint Mapper" \
 --trustAll \
 --no-prompt
$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --useStartTLS \
 --saslOption mech="EXTERNAL" \
 --certNickName myapp-cert \
 --keyStorePath /path/to/my-keystore \
 --keyStorePasswordFile /path/to/my-keystore.pin \
 --trustStorePath /path/to/my-keystore \
 --trustStorePasswordFile /path/to/my-keystore.pin \
 "(cn=My App)" \
 userPassword
dn: cn=My App,ou=Apps,dc=example,dc=com
userPassword: {SSHA512}<hash>
  

This example uses the subject attribute to user attribute mapper:

$ dsconfig \
 set-sasl-mechanism-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name External \
 --set certificate-mapper:"Subject Attribute to User Attribute" \
 --trustAll \
 --no-prompt
$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --useStartTLS \
 --saslOption mech="EXTERNAL" \
 --certNickName myapp-cert \
 --keyStorePath /path/to/my-keystore \
 --keyStorePasswordFile /path/to/my-keystore.pin \
 --trustStorePath /path/to/my-keystore \
 --trustStorePasswordFile /path/to/my-keystore.pin \
 "(cn=My App)" \
 userPassword
dn: cn=My App,ou=Apps,dc=example,dc=com
userPassword: {SSHA512}<hash>
  

This example uses the subject DN to user attribute mapper:

$ dsconfig \
 set-sasl-mechanism-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name External \
 --set certificate-mapper:"Subject DN to User Attribute" \
 --trustAll \
 --no-prompt
$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --useStartTLS \
 --saslOption mech="EXTERNAL" \
 --certNickName myapp-cert \
 --keyStorePath /path/to/my-keystore \
 --keyStorePasswordFile /path/to/my-keystore.pin \
 --trustStorePath /path/to/my-keystore \
 --trustStorePasswordFile /path/to/my-keystore.pin \
 "(cn=My App)" \
 userPassword
dn: cn=My App,ou=Apps,dc=example,dc=com
userPassword: {SSHA512}<hash>
  

9.7. Authenticating Using Digest MD5

Digest MD5 authentication allows password-based authentication without exposing the password on the network in the clear. It does require that both the client application and the OpenDJ server have access to the cleartext password, however. Passwords must be stored with a reversible password storage scheme.

Rather than including the password in the bind request, Digest MD5 authentication uses a two-step process where the client needs only to prove that it knows the password. The mechanism uses data that is randomly generated by the OpenDJ server to make it resistant to replay attacks. It also includes randomly generated data from the client, which makes it also resistant to problems resulting from weak server-side random number generation.

OpenDJ servers support Digest MD5 authentication through its DIGEST-MD5 SASL authentication mechanism. This mechanism is enabled by default unless the server was installed with the setup command option, --productionMode.

The default password policy prevents Digest MD5 authentication, as it uses a one-way hash rather than a reversible scheme. If you plan to use Digest MD5 authentication, set the password storage scheme for the users involved to a reversible mechanism before storing the their passwords. (Once the passwords have been stored with a one-way hash mechanism, the passwords will not be stored using a new mechanism until they are modified. Alternatively, an OpenDJ server can store the password with the new mechanism when the user authenticates. To enable this feature, configure the deprecated-password-storage-scheme property of the applicable password policy as described in "Configuring Password Storage".) For example, the following command sets the default password storage scheme to use the Advanced Encryption Standard (AES) reversible scheme:

$ dsconfig \
 set-password-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Default Password Policy" \
 --set default-password-storage-scheme:aes \
 --trustAll \
 --no-prompt
  

Once the scheme is defined, you can test Digest MD5 authentication by changing a user's password to ensure that it is stored with the reversible scheme, and then authenticating as the user. When reading the following example it is important to realize that, although the user provides their password to the client application, the password is never sent in the clear over the connection:

# Make sure the password is encoded with a reversible scheme:
$ ldappasswordmodify \
 --port 1389 \
 --authzID "dn:uid=bjensen,ou=people,dc=example,dc=com" \
 --currentPassword hifalutin \
 --newPassword password
The LDAP password modify operation was successful

# Use Digest MD5 authentication:
$ ldapsearch \
 --hostname opendj.example.com \
 --port 1389 \
 --baseDN dc=example,dc=com \
 --saslOption mech=DIGEST-MD5 \
 --saslOption authid=u:bjensen \
 --bindPassword password \
 uid=bjensen \
 userPassword
dn: uid=bjensen,ou=People,dc=example,dc=com
userPassword: {AES}<encrypted>
  

The preceding example sets only the authentication ID with the --saslOption authid option. It is also possible to set the authorization ID separately by using the --saslOption authzid option.

9.8. Authenticating With Kerberos

Windows, UNIX, and Linux systems support Kerberos v5 authentication, which can operate safely on an open, unprotected network. In Kerberos authentication, the client application obtains temporary credentials for a service from an authorization server, in the form of tickets and session keys. The service server must be able to handle its part of the Kerberos mutual authentication process.

OpenDJ servers can interoperate with Kerberos systems through their GSSAPI SASL authentication mechanism.

Meet the following constraints when working with Kerberos systems:

  • The clocks on the host systems where the OpenDJ server runs must be kept in sync with other hosts in the system.

    For example, you can use Network Time Protocol (NTP) services to keep the clocks in sync.

  • Each OpenDJ server needs its own keytab file, the file which holds its pairs of Kerberos principals and keys.

  • Depending on the encryption mechanisms Kerberos uses, each Java installation used by an OpenDJ server might require unlimited strength Java cryptography policy, which much be installed separately as described in "Using Unlimited Strength Cryptography".

    OpenDJ server debug logging can display exceptions about unsupported encryption types when a mismatch occurs, but the exceptions are not visible unless you activate debug logging.

To Configure the Server as a Kerberos Service Server

Follow these steps when setting up an OpenDJ server as a Kerberos service server:

  1. Make sure the clock on the OpenDJ server host system is kept in sync with the other hosts' clocks in the Kerberos system.

  2. Make sure that DNS resolves fully qualified domain names correctly on all systems involved.

  3. Make sure the necessary ports are open on the OpenDJ server host system.

  4. Make sure the encryption strengths required by the Kerberos system are supported by the JVM that the OpenDJ server uses.

  5. Make sure that Kerberos is operating correctly for other services, including Kerberos client services on the OpenDJ server host.

    This step depends on the implementation, but usually includes adding a Kerberos principal for the host.

  6. Add a Kerberos principal for the OpenDJ server, such as ldap/opendj.example.com.

  7. Create a keytab file for the OpenDJ server.

    This step depends on the Kerberos implementation, but generally consists of extracting the key for the OpenDJ server Kerberos principal such as ldap/opendj.example.com on the host where the OpenDJ server runs.

  8. Make the keytab file readable only by the OpenDJ server, and copy it to the /path/to/opendj/config/ directory.

  9. Configure the OpenDJ server to handle GSSAPI SASL authentication:

    $ dsconfig \
     set-sasl-mechanism-handler-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --handler-name GSSAPI \
     --set enabled:true \
     --set keytab:/path/to/opendj/config/opendj.keytab \
     --set server-fqdn:opendj.example.com \
     --trustAll \
     --no-prompt
        
  10. If your Kerberos principal user identifiers are not of the form name@realm, configure an appropriate identity-mapper for the GSSAPI SASL mechanism handler.

    By default, the OpenDJ server uses the regular expression identity mapper, which expects user identifiers to match the pattern ^([^@])@.$. It maps the string before @ to the value of the UID attribute. This works well for identifiers like bjensen@EXAMPLE.COM.

  11. Restart the OpenDJ server to ensure the configuration changes are taken into account:

    $ stop-ds --restart
    
    ...GSSAPI SASL mechanism using a server fully qualified domain name of:
     opendj.example.com
    ...GSSAPI mechanism using a principal name of:
     principal="opendj/opendj.example.com"
    ...The GSSAPI SASL mechanism handler initialization was successful
        
  12. Test that the mechanism works, by authenticating as a Kerberos user:

    $ ldapsearch \
     --hostname opendj.example.com \
     --port 1389 \
     --baseDN dc=example,dc=com \
     --saslOption mech=GSSAPI \
     --saslOption authid=bjensen@EXAMPLE.COM \
     uid=bjensen \
     cn
    dn: uid=bjensen,ou=People,dc=example,dc=com
    cn: Barbara Jensen
    cn: Babs Jensen
        

Chapter 10. Securing Directory Administration

This chapter explains and demonstrates how to manage directory administration in a secure way. In this chapter you will learn to:

  • Determine which roles different administrators should have

  • Create and update administrator accounts

  • Assign appropriate administrative privileges

  • Constrain and limit administrative access

  • Manage administrator accounts and roles systematically

10.1. About the Roles Directory Administrators Play

When an OpenDJ server is first installed, only one directory administrator account is created. This administrator, by default cn=Directory Manager, is a directory root DN administrator (under cn=Root DNs,cn=config), capable of unrestricted changes to the directory service, including bypassing access control and augmenting its own list of administrative privileges.

Some deployments require only one administrator. For example, in deployments where the server configuration is never changed in production or where the server is embedded as part of a single application, additional administrators might be unnecessary.

For any directory service with more than one administrator, however, it makes sense to limit what individual administrators can do. When each administrator only has access to perform their individual duties, there is less risk of accidental or intentional abuse. In addition, problems arising from administrative errors or bugs can be easier to characterize when each administrator has a specific role with only necessary administrative privileges and access.

Specifying administrative roles for your deployment is beyond the scope of this guide. It helps to understand what tasks directory administrators can perform, however, and how the roles might be distinguished from one another. The broadest distinction to make is between administrators who manage the directory service, which is a container for user data, and administrators who manage user data.

Administrators who manage the directory service should usually not have all the privileges of default directory manager. The tasks they complete and the privileges required are described in "Directory Service Administration".

Directory Service Administration
TasksCorresponding Access and Privileges

OpenDJ server privileges are described in "About Privileges".

Install and upgrade servers

Access to file system; capacity to run server commands

Delegate administration

Access to write administration-related attributes on others' entries; OpenDJ server privileges: config-read, config-write, modify-acl, privilege-change

Manage server processes (start, restart, stop)

Capacity to run the start-ds and stop-ds commands; OpenDJ server privileges: server-restart, server-shutdown

Manage changes to server configuration, including global and default settings

Access to read and write to cn=config, cn=schema, and potentially other administrative DNs such as cn=admin data and cn=tasks; OpenDJ server privileges: config-read, config-write, modify-acl (for global ACIs), update-schema

Manage containers for user data, including backends and indexes

File system access for backup data and exported LDIF; access to create entries under cn=tasks; OpenDJ server privileges: backend-backup, backend-restore, config-read, config-write, ldif-export, ldif-import, modify-acl (for ACIs in user data), subentry-write

Manage changes to server schemas

Access to write to cn=schema; potentially file system access to add schema files; OpenDJ server privileges: update-schema

Manage directory server data replication

File system access to read logs/replication; access to read and write to cn=admin data; capacity to use the dsreplication command; OpenDJ server privileges: changelog-read, config-read, data-sync

Monitor the directory service

Access to read cn=monitor; OpenDJ server privileges: jmx-notify, jmx-read, jmx-write (these three being useful when using JMX for monitoring)

Back up and restore directory data

File system access for backup data and exported LDIF; access to create entries under cn=tasks; OpenDJ server privileges: backend-backup, backend-restore, ldif-export, ldif-import

Troubleshoot problems with the directory service

File system access to read log messages; write access to create entries under cn=tasks, access to read cn=monitor; OpenDJ server privileges: bypass-lockdown, cancel-request, config-read, config-write (to enable debug logging, for example), disconnect-client, server-lockdown


Administrators who manage user data usually make changes through remote applications. The tasks they complete and the privileges required are described in "Directory Data Administration".

Directory Data Administration
TasksCorresponding Access and Privileges

Manage changes to users, groups, and other accounts for their organizations

Access to read and write to others' entries

Delegate administration within their organizations

Access to write administration-related attributes on others' entries; OpenDJ server privileges: modify-acl, privilege-change

Update administrative user data such as subentry-based password policies and access controls

Access to write administration-related attributes on others' entries; OpenDJ server privileges: modify-acl, subentry-write

Help users who are locked out, or have forgotten or lost their password

Access to use the manage-account command; access to request a password modify extended operation; access to update passwords on user entries; OpenDJ server privileges: password-reset

Assist users and application developers who access the directory service

Access to read (and potentially write to) others' entries

If performing operations on behalf of other users, access to request proxied authorization; OpenDJ server privileges: proxied-auth


Depending on the complexity of the directory service and the number of different administrators, it could make sense to subdivide administrative roles and limit the specific tasks each administrator can perform.

OpenDJ servers make it possible to limit administrative capabilities to specific tasks and data. They use the following server features to achieve this:

  • Server resource limits broadly constrain what users can do.

    Resource limits are covered in "Setting Resource Limits" in the Administration Guide.

  • Server administrative privileges govern the administrative tasks that users can perform.

    Privileges are covered in "Assigning Administrative Privileges".

  • Access control settings provide fine-grained control over what a user is authorized to do in terms of LDAP operations, including the conditions for connecting to the directory.

    Access control is covered in "Securing Access to Directory Data".

Many operations require both privileges and also ACIs. For example, in order to reset user's passwords, an administrator needs the password-reset privilege and access control to write userPassword values on the user entries. By combining ACIs with privileges, the administrator can effectively restrict the scope of a privilege.

The rest of this chapter covers how to manage administrator accounts, set privileges, and limit administrative access.

10.2. Managing Administrator Accounts

OpenDJ server administrators can either have a root DN account that is part of the (non-replicated) server configuration, or a regular user account with privileges and access to perform administrative tasks.

To Use a Non-Default Root DN Account

In addition to the default root DN account, cn=Directory Manager, OpenDJ servers let you create additional root DN accounts.

This makes it possible to add administrators with a different bind DN than the default, making it more difficult for attackers to guess the directory manager bind DN. Alternatively, you could add an administrator with limited rights.

The following steps create an account that is identical to the default root DN account, but with a different bind DN than the default, and then remove the default account:

  1. Create the administrator account using the ldapmodify command as a Root DN user whose account already exists.

    The administrator account is located under cn=Root DNs,cn=config and has the object class ds-cfg-root-dn-user:

    Tip

    Avoid using Alternate DM since it shows up here in the documentation.

    Choose a name that is specific to your deployment.

    $ cat alt-root.ldif
    dn: cn=Alternate DM,cn=Root DNs,cn=config
    objectClass: top
    objectClass: person
    objectClass: organizationalPerson
    objectClass: inetOrgPerson
    objectClass: ds-cfg-root-dn-user
    cn: Alternate DM
    givenName: Backup
    sn: Administrator
    ds-cfg-alternate-bind-dn: cn=Alternate DM
    ds-rlim-size-limit: 0
    ds-rlim-time-limit: 0
    ds-rlim-idle-time-limit: 0
    ds-rlim-lookthrough-limit: 0
    ds-pwp-password-policy-dn: cn=Root Password Policy,cn=Password Policies,cn=config
    userPassword: password
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     alt-root.ldif
        
  2. Remove the default root DN account, cn=Directory Manager.

    $ ldapdelete \
     --port 1389 \
     --bindDN "cn=Alternate DM" \
     --bindPassword password \
     "cn=Directory Manager,cn=Root DNs,cn=config"
        

    In this example, cn=Alternate DM now has the same rights as the original default root DN user.

  3. Repeat these steps for other OpenDJ servers.

    The account is not replicated, because it is part of the server configuration.

To Use a Non-Default Global Administrator Name

For replicated directory server topologies, a global administrator account exists on all servers in the replication topology. This provides an account to administer replication with the same credentials on every server in the topology.

  • When configuring replication as described in "Configuring Replication Settings" in the Administration Guide, create the global account with a name other than admin, which is the example used in the documentation.

    Choose a name that is specific to your deployment.

To Make a Directory User an Administrator

Any user in the directory can have administrative privileges, ACIs to perform administrative operations, and resource limits to perform expensive operations. In the sample data found in Example.ldif, see how members of the Directory Administrators group have specific ACIs to allow them more access than normal users. Also see how the application with CN My App has the privilege to request proxied authorization and perform operations on behalf of other users.

When following these high-level steps, only allow the minimum required capabilities initially. Grant additional capabilities as they prove to be required:

  1. (Optional) Adjust the resource limits to as needed.

    This can be done for an individual user or for a group of administrators as described in "Setting Resource Limits" in the Administration Guide.

  2. (Optional) Assign any necessary OpenDJ server privileges.

    As explained in "About the Roles Directory Administrators Play", the required privileges depend on the adminstration tasks performed.

    For details, see "Assigning Administrative Privileges".

  3. Add the necessary ACIs as described in "Securing Access to Directory Data".

10.3. Assigning Administrative Privileges

As described in "About the Roles Directory Administrators Play", OpenDJ server administrative privileges govern the administrative tasks that users can perform.

10.3.1. About Privileges

Privileges provide access control for server administration independently from ACIs.

By default, directory root users, such as cn=Directory Manager, are granted the privileges marked with an asterisk (*). Other administrator users can be assigned these privileges, too:

backend-backup*

Request a task to back up data

backend-restore*

Request a task to restore data from backup

bypass-acl*

Perform operations without regard to ACIs

bypass-lockdown*

Perform operations without regard to lockdown mode

cancel-request*

Cancel any client request

changelog-read*

Read the changelog (under cn=changelog)

config-read*

Read the server configuration

config-write*

Change the server configuration

data-sync

Perform data synchronization

disconnect-client*

Close any client connection

jmx-notify

Subscribe to JMX notifications

jmx-read

Read JMX attribute values

jmx-write

Write JMX attribute values

ldif-export*

Export data to LDIF

ldif-import*

Import data from LDIF

modify-acl*

Change ACIs

password-reset*

Reset other users' passwords

privilege-change*

Change the privileges assigned to users

Take great care when assigning this privilege, as it allows the user to assign themselves all other administrative privileges.

proxied-auth

Use the Proxied Authorization control

server-lockdown*

Put the server into and take the server out of lockdown mode

server-restart*

Request a task to restart the server

server-shutdown*

Request a task to stop the server

subentry-write*

Perform LDAP subentry write operations

unindexed-search*

Search using a filter with no corresponding index

update-schema*

Change LDAP schema definitions

10.3.2. Configuring Privileges

For root directory administrators, by default cn=Directory Manager, you configure default privileges using the dsconfig command as described in "To Change Default Root DN Privileges".

For all directory administrators, you can change privileges with the ldapmodify command as shown in the following procedures:

To Change Default Root DN Privileges

Follow these steps to change default privileges for all Root DN administrators, whose entries are under cn=Root DNs,cn=config.

  1. Start dsconfig in interactive mode:

    $ dsconfig \
     --port 4444 \
     --hostname opendj.example.com \
     --bindDN "cn=Directory Manager" \
     --bindPassword password
       
  2. Select the Root DN menu.

  3. Select View and edit the Root DN.

  4. Edit the default-root-privilege-name.

  5. Make sure you apply the changes when finished.

To Add Privileges for an Individual Administrator

Privileges are specified using the ds-privilege-name operational attribute, which you can change using the ldapmodify command.

  1. Determine the privileges to add:

    $ cat privileges.ldif
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    changetype: modify
    add: ds-privilege-name
    ds-privilege-name: config-read
    ds-privilege-name: password-reset
    
       

    This example lets the user read the server configuration, and reset user passwords. In order for the user to be able to change a user password, you must also allow the modification using ACIs.

    For this example, Kirsten Vaughan is a member of the Directory Administrators group for Example.com, and already has access to modify user entries.

    Prior to having the privileges, Kirsten gets messages about insufficient access when trying to read the server configuration, or trying to reset a user password:

    $ ldapsearch \
     --port 1389 \
     --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
     --bindPassword bribery \
     --baseDN cn=config \
     "(objectclass=*)"
    # The LDAP search request failed: 50 (Insufficient Access Rights)
    # Additional Information:  You do not have sufficient privileges to perform search operations in the Directory Server configuration
    $ ldappasswordmodify \
     --port 1389 \
     --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
     --bindPassword bribery \
     --authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \
     --newPassword changeit
    The LDAP password modify operation failed: 50 (Insufficient Access Rights)
    Additional Information:  You do not have sufficient privileges to perform
    password reset operations
       
  2. Apply the change as a user with the privilege-change privilege:

    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     privileges.ldif
       

    At this point, Kirsten can perform the operations requiring privileges:

    $ ldapsearch \
     --port 1389 \
     --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
     --bindPassword bribery \
     --baseDN cn=config \
     "(objectclass=*)"
    dn: cn=config
    …
    $ ldappasswordmodify \
     --port 1389 \
     --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
     --bindPassword bribery \
     --authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \
     --newPassword changeit
    The LDAP password modify operation was successful
       
To Add Privileges for a Group of Administrators

For deployments with more than one administrator, use groups to define administrative rights.

You can use a collective attribute subentry to specify privileges for the administrator group.

Collective attributes provide a standard mechanism for defining attributes that appear on all the entries in a particular subtree. An OpenDJ server extends collective attributes to give you fine-grained control over which entries are in scope. In addition, an OpenDJ server lets you use virtual attributes, such as isMemberOf to construct the filter for targeting entries in scope. This allows you, for example, to define administrative privileges that apply to all users who belong to an administrator group:

  1. Create an LDAP subentry that specifies the collective attributes:

    $ cat collective.ldif
    dn: cn=Administrator Privileges,dc=example,dc=com
    objectClass: collectiveAttributeSubentry
    objectClass: extensibleObject
    objectClass: subentry
    objectClass: top
    cn: Administrator Privileges
    ds-privilege-name;collective: config-read
    ds-privilege-name;collective: config-write
    ds-privilege-name;collective: ldif-export
    ds-privilege-name;collective: modify-acl
    ds-privilege-name;collective: password-reset
    ds-privilege-name;collective: proxied-auth
    subtreeSpecification: {base "ou=people", specificationFilter
      "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     collective.ldif
       

    The Directory Administrators group for Example.com includes members like Harry Miller.

  2. Observe that the change takes effect immediately:

    $ ldappasswordmodify \
     --port 1389 \
     --bindDN "uid=hmiller,ou=people,dc=example,dc=com" \
     --bindPassword hillock \
     --authzID "dn:uid=scarter,ou=People,dc=example,dc=com"
    The LDAP password modify operation was successful
    Generated Password:  <password>
       
To Limit Inherited Privileges

When privileges are set as described in "To Add Privileges for a Group of Administrators", the same list of privileges is applied to every target account. An OpenDJ server also assigns default directory root DN privileges as described in "To Change Default Root DN Privileges".

In some cases, the list of inherited privileges can be too broad. OpenDJ servers have a mechanism to limit effective privileges by preceding the privilege attribute value with a -.

The following steps show how to prevent Kirsten Vaughan from resetting passwords when the privilege is assigned as described in "To Add Privileges for a Group of Administrators":

  1. Check the privilege settings for the account:

    $ ldapsearch \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --baseDN dc=example,dc=com \
     "(uid=kvaughan)" \
     ds-privilege-name
    dn: uid=kvaughan,ou=People,dc=example,dc=com
    ds-privilege-name: config-read
    ds-privilege-name: password-reset
       
  2. Set the privilege attribute for the account to deny the privilege:

    $ cat restrict-privileges.ldif
    dn: uid=kvaughan,ou=people,dc=example,dc=com
    changetype: modify
    add: ds-privilege-name
    ds-privilege-name: -password-reset
    
    $ ldapmodify \
     --port 1389 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     restrict-privileges.ldif
       
  3. Observe that the privilege is no longer in effect:

    $ ldappasswordmodify \
     --port 1389 \
     --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
     --bindPassword bribery \
     --authzID "dn:uid=scarter,ou=People,dc=example,dc=com"
    The LDAP password modify operation failed: 50 (Insufficient Access Rights)
    Additional Information:  You do not have sufficient privileges to perform
    password reset operations
       

10.4. Managing Administrator Accounts Systematically

OpenDJ software provides the tools and features needed to manage user and administrator accounts individually or in groups. If the deployment calls for provisioning and workflow capabilities, or custom tools for day-to-day administration, then other tools are available to help manage groups and users systematically, including administrator accounts.

Some deployments require automation of provisioning and workflow operations, and management of many different user roles. In such cases, identity management software can help. ForgeRock Identity Management software, based on the OpenIDM project, offers user self-service, provisioning, data synchronization, workflow, and other capabilities to deal with constant changes to directory data in a centrally-managed, automated, systematic way.

Simple or local deployments might require a GUI for generic or system-specific administrative operations. In such cases, OpenDJ software's adherence to standards like LDAP v3 makes it interoperable with many third-party tools.

Chapter 11. Securing Access to Directory Data

This chapter explains and demonstrates how to secure access to directory data. In this chapter you will learn to:

  • Authorize access only as needed

  • Use ACIs or global access policies to control access to directory data

  • Prevent access temporarily by putting the server in lockdown mode

11.1. Authorizing Access as Needed

OpenDJ servers are designed to protect unauthorized access to directory data:

  • Data confidentiality with encryption on disk prevents other users with file system access or access to backup files from reading directory data.

  • Secure connections prevent eavesdropping on communications between clients and servers.

  • Administrative privileges control access to server administration operations.

  • Authentication mechanisms and fine-grained authorization controls constrain who has access to what data under what conditions.

When you set up an OpenDJ server for evaluation, the settings can allow all client applications to read most user data. This makes it easier to become familiar with OpenDJ server features before you fully understand how the server works.

When deploying an OpenDJ server for use in production, it is much safer to grant access only as needed:

11.2. Using ACIs or Global Access Policies

ACIs apply to directory data, providing fine-grained control over what a user or group member is authorized to do in terms of LDAP operations. Most access control instructions specify scopes (targets) so that an even an administrative user with full access to all data in dc=example,dc=com might have not access at all to data in dc=example,dc=org.

ACIs are implemented as attributes on OpenDJ server entries. This means they can be updated over protocol while the server is running. ACI attribute values are written in a special domain-specific language that is described in this section.

Global access control policies are similar to ACIs. They are configured as entries in the server configuration, and apply to an OpenDJ server. They provide coarse-grained access control suitable for use on proxy servers, where the lack of local access to directory data makes ACIs a poor fit.

Note

Access control instructions (ACI) and global access control policies rely on different access control handlers, which implement different access control models. ACIs rely on the DSEE-compatible access control handler. (DSEE refers to Sun Java System Directory Server Enterprise Edition.) Global access control policies rely on the policy-based access control handler. A server can only use one handler at a time.

Take the following constraints into consideration:

  • When the policy-based handler is configured, ACIs have no effect.

  • When the DSEE-compatible handler is configured, global access control policies have no effect.

  • When a server is set up as a directory server, it uses the DSEE-compatible access control handler, with ACIs in directory data and global ACIs in the configuration.

  • When a server is set up as a directory proxy server, it uses the policy-based access control policy handler, and global access control policies.

  • Once the server has been set up, the choice of access control handler cannot be changed with the dsconfig command.

Some operations require both privileges and access control. For example, in order to reset user's passwords, an administrator needs the password-reset privilege and access to write userPassword values on user entries. By combining access control and privileges, you can effectively restrict scope of privileges to a particular branch of the Directory Information Tree. Privileges are described in "Securing Directory Administration".

11.2.1. About ACIs

OpenDJ server ACIs exist as operational aci attribute values on directory entries, and as global ACI attributes stored in the configuration. ACIs apply to a scope defined in the instruction. They set permissions that depend on what operation is requested, who requested the operation, and how the client connected to the server.

For example, the ACIs on the following entry allow anonymous read access to all attributes except passwords, and allow read-write access for directory administrators under dc=example,dc=com:

dn: dc=example,dc=com
objectClass: domain
objectClass: top
dc: example
aci: (target ="ldap:///dc=example,dc=com")
 (targetattr != "userPassword")(version 3.0;acl "Anonymous read-search access";
 allow(read, search, compare)(userdn = "ldap:///anyone");)
aci: (target="ldap:///dc=example,dc=com")
 (targetattr = "*")(version 3.0; acl "allow all Admin group";
 allow(all) groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com";)
 

An OpenDJ server's default behavior is that no access is allowed unless it is specifically granted by an ACI. (The bypass-acl privilege, assigned to certain users such as cn=Directory Manager, can allow users to bypass access control checks.)

An OpenDJ server provides default global ACIs to facilitate evaluation while maintaining a reasonable security policy. By default, users are granted access to:

  • Read the root DSE

  • Read the LDAP schema

  • Use certain LDAP controls and extended operations

  • Modify their own entries

  • Read public data and operational attributes

Global ACIs are defined on the access control handler, and apply to the entire server. You must adjust the default global ACIs to match the security policies for your organization, for example, to restrict anonymous access.

ACI attribute values use a specific language described in this section. Although ACI attribute values can become difficult to read in LDIF, the basic syntax is simple:

targets(version 3.0;acl "name";permissions subjects;)

The following list briefly explains the variables in the syntax above:

targets

The targets specifies entries, attributes, controls, and extended operations to which the ACI applies.

To include multiple targets, enclose each individual target in parentheses, (). When you specify multiple targets, all targets must match for the ACI to apply (AND).

name

Supplies a human-readable description of what the ACI does.

permissions

Defines which actions to allow, and which to deny. Paired with subjects.

subjects

Identifies clients to which the ACI applies depending on who connected, and when, where, and how they connected. Paired with permissions.

Separate multiple pairs of permissions-subjects definitions with semicolons, ;. When you specify multiple permissions-subjects pairs, at least one must match (OR).

11.2.1.1. ACI Targets

The seven types of ACI targets identify the objects to which the ACI applies. Most expressions allow you to use either = to specify that the target should match the value or != to specify that the target should not match the value:

(target [!]= "ldap:///DN")

Sets the scope to the entry with distinguished name DN, and to child entries.

You can use asterisks, *, to replace attribute types, attribute values, and entire DN components.

In other words, the following specification targets both uid=bjensen,ou=People,dc=example,dc=com and cn=My App,ou=Apps,dc=example,dc=com:

(target = "ldap:///*=*,*,dc=example,dc=com")

The DN must be in the subtree of the entry where the ACI is defined.

If you do not specify target, then the entry holding this ACI is affected. If targetscope is also omitted, then this entry and all subordinates are affected.

(targetattr [!]= "attr-list")

Replace attr-list with a list of attribute type names, such as userPassword, separating multiple attribute type names with ||.

This specification affects the entry where the ACI is located, or the entries specified by other targets in the ACI.

You can use an asterisk, *, to specify all user attributes, although you will see better performance when explicitly including or excluding attribute types as needed. You can use a plus sign, +, to specify all operational attributes.

A negated attr-list of operational attributes will only match other operational attributes and never any user attributes, and vice-versa.

If you do not include this target specification, then by default no attributes are affected by the ACI.

(targetfilter [!]= "ldap-filter")

Sets the scope to match the ldap-filter dynamically, as in an LDAP search. The ldap-filter can be any valid LDAP filter.

(targattrfilters [!]= "expression")

Use this target specification when managing changes made to particular attributes.

The expression takes one of the following forms. Separate expressions with semicolons (;):

op=attr1:filter1[&& attr2:filter2 …][;op=attr3:filter3[&& attr4:filter4 …] …]

The op can be either add for operations creating attributes, or del for operations removing them.

Replace attr with an attribute type. Replace filter with an LDAP filter that corresponds to the attr attribute type.

(targetscope = "base|onelevel|subtree|subordinate")
  • base refers to the entry with the ACI.

  • onelevel refers to immediate children.

  • subtree refers to the base entry and all children.

  • subordinate refers to all children only.

If you do not specify targetscope, the default is subtree.

(targetcontrol [!]= "OID")

Replace OID with the object identifier for the LDAP control to target. Separate multiple OIDs with ||.

To use an LDAP control, the bind DN user must have allow(read) permissions.

This target cannot be restricted to a specific subtree by combining it with another target.

(extop [!]= "OID")

Replace OID with the object identifier for the extended operation to target. Separate multiple OIDs with ||.

To use an LDAP extended operation, the bind DN user must have allow(read) permissions.

This target cannot be restricted to a specific subtree by combining it with another target.

11.2.1.2. ACI Permissions

ACI permission definitions take one of the following forms:

allow(action[, action …])
deny(action[, action …])

Tip

Although deny is supported, avoid restricting permissions by using deny. Instead, explicitly allow access only as needed. What looks harmless and simple in tests and examples can grow difficult to maintain in a real-world deployment with nested ACIs.

Replace action with one of the following:

add

Entry creation, as for an LDAP add operation.

all

All permissions, except export, import, proxy.

compare

Attribute value comparison, as for an LDAP compare operation.

delete

Entry deletion, as for an LDAP delete operation.

export

Entry export during a modify DN operation.

Despite the name, this action is unrelated to LDIF export operations.

import

Entry import during a modify DN operation.

Despite the name, this action is unrelated to LDIF import operations.

proxy

Access the ACI target using the rights of another user.

read

Read entries and attributes, or use an LDAP control or extended operation.

search

Search the ACI targets.

Combine with read to read the search results.

selfwrite

Add or delete own DN from a group.

write

Modify attributes on ACI target entries.

11.2.1.3. ACI Subjects

ACI subjects match characteristics of the client connection to the server. Use subjects to restrict whether the ACI applies depending on who connected, and when, where, and how they connected. Most expressions allow you to use either = to specify that the condition should match the value or != to specify that the condition should not match the value:

authmethod [!]= "none|simple|ssl|sasl mech"
  • none means do not check.

  • simple means simple authentication.

  • ssl refers to certificate-based authentication over LDAPS.

  • sasl mech refers to SASL, where mech is DIGEST-MD5, EXTERNAL, or GSSAPI.

dayofweek [!]= "day[, day …]"

Replace day with one of:

sun
mon
tue
wed
thu
fri
sat
dns [!]= "hostname"

Use asterisks, *, to replace name components, such as dns = "*.example.com".

groupdn [!]= "ldap:///DN[|| ldap:///DN …]"

Replace DN with the distinguished name of a group to permit or restrict access for members.

ip [!]= "addresses"

The addresses can be specified for IPv4 or IPv6.

IPv6 addresses are specified in brackets as ldap://[address]/subnet-prefix where /subnet-prefix is optional.

You can specify:

  • Individual IPv4 addresses

  • Addresses with asterisks (*) to replace subnets and host numbers

  • CIDR notation

  • Forms such as 192.168.0.*+255.255.255.0 to specify subnet masks

ssf = "strength", ssf != "strength", ssf > "strength", ssf >= "strength", ssf < "strength", ssf <= "strength"

The security strength factor (ssf) pertains to the cipher key strength for connections using DIGEST-MD5, GSSAPI, SSL, or TLS.

For example, to require that the connection must have a cipher strength of at least 256 bits, specify ssf >= "256".

timeofday = "hhmm", timeofday != "hhmm", timeofday > "hhmm", timeofday >= "hhmm", timeofday < "hhmm", timeofday <= "hhmm"

The hhmm is expressed as on a 24-hour clock.

For example, 1:15 PM is written 1315.

userattr [!]= "attr#value", userattr [!]= ldap-url#LDAPURL", userattr [!]= "[parent[child-level]. ]attr#GROUPDN|USERDN"

The userattr subject specifies an attribute that must match on both the bind entry and the target of the ACI.

To match when the user attribute on the bind DN entry corresponds directly to the attribute on the target entry, replace attr with the user attribute type, and value with the attribute value. An OpenDJ server performs an internal search to get the attributes of the bind entry. Therefore, this ACI subject does not work with operational attributes.

To match when the target entry is identified by an LDAP URL, and the bind DN is in the subtree of the DN of the LDAP URL, use ldap-url#LDAPURL.

To match when the bind DN corresponds to a member of the group identified by the attr value on the target entry, use attr#GROUPDN.

To match when the bind DN corresponds to the attr value on the target entry, use attr#USERDN.

The optional inheritance specification, parent[child-level]., lets you specify how many levels below the target entry inherit the ACI. The child-level is a number from 0 to 9, with 0 indicating the target entry only. Separate multiple child-level digits with commas (,).

userdn [!]= "ldap-url++[|| ldap-url++ …]"

To match the bind DN, replace ldap-url++ with either a valid LDAP URL, such as ldap:///uid=bjensen,ou=People,dc=example,dc=com, or ldap:///dc=example,dc=com??sub?(uid=bjensen), or a special LDAP URL-like keyword from the following list:

ldap:///all

Match authenticated users.

ldap:///anyone

Match anonymous and authenticated users.

ldap:///parent

Match when the bind DN is a parent of the ACI target.

ldap:///self

Match when the bind DN entry corresponds to ACI target.

11.2.1.4. How ACI is Evaluated

Understanding how an OpenDJ server evaluates the aci values is critical when implementing an access control policy.

The rules the server follows are simple:

  1. To determine whether an operation is allowed or denied, an OpenDJ server looks in the directory for the target of the operation. It collects any ACI values from that entry, and then walks up the directory tree to the suffix, collecting all ACI values en route. Global ACI values are then collected.

  2. It then separates the ACI values into two lists; one list contains all the ACI values that match the target and deny the required access, and the other list contains all the ACI values that match the target and allow the required access.

  3. If the deny list contains any ACI values after this procedure, access is immediately denied.

  4. If the deny list is empty, then the allow list is processed. If the allow list contains any ACI values, access is allowed.

  5. If both lists are empty, access is denied.

Note

Some operations require multiple permissions and involve multiple targets. Evaluation will therefore take place multiple times. For example, a search operation requires the search permission for each attribute in the search filter. If all those are allowed, the read permission is used to decide what attributes and values can be returned.

11.2.1.5. ACI Required For LDAP Operations

The minimal access control information required for specific LDAP operations is described here:

Add

The ACI must allow the add permission to entries in the target. This implicitly allows the attributes and values to be set.

Use targattrfilters to explicitly deny access to any values if required.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to add an entry is:

aci: (version 3.0;acl "Add entry"; allow (add)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
Bind

Because this is used to establish the user's identity and derived authorizations, ACI is irrelevant for this operation and is not checked.

To prevent authentication, disable the account instead. For details, see "Managing Accounts Manually" in the Administration Guide.

Compare

The ACI must allow the compare permission to the attribute in the target entry.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to compare values against the sn attribute is:

aci: (targetattr = "sn")(version 3.0;acl "Compare surname"; allow (compare)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
Delete

The ACI must allow the delete permission to the target entry. This implicitly allows the attributes and values in the target to be deleted.

Use targattrfilters to explicitly deny access to the values if required.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to delete an entry is:

aci: (version 3.0;acl "Delete entry"; allow (delete)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
Modify

The ACI must allow the write permission to attributes in the target entries. This implicitly allows all values in the target attribute to be modified.

Use targattrfilters to explicitly deny access to specific values if required.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to modify the description attribute in an entry is:

aci: (targetattr = "description")(version 3.0; acl "Modify description"; allow (write)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
ModifyDN

If the entry is being moved to a newSuperior, the export permission must be allowed on the target, and the import permission must be allowed on the newSuperior entry.

The ACI must allow write permission to the attributes in the old RDN and the new RDN. All values of the old RDN and new RDN can be written implicitly; use targattrfilters to explicitly deny access to values used if required.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to rename entries named with the uid attribute to new locations:

aci: (targetattr = "uid")(version 3.0;acl "Rename uid= entries";
 allow (write, import, export)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
Search

ACI is required to process the search filter, and to determine what attributes and values may be returned in the results. The search permission is used to allow particular attributes in the search filter. The read permission is used to allow particular attributes to be returned.

If read permission is allowed to any attribute, the server automatically allows the objectClass attribute to also be read.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to search for uid attributes, and also to read that attribute in matching entries is:

aci: (targetattr = "uid")(version 3.0;acl "Search and read uid"; allow (search, read)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     
Use Control or Extended Operation

The ACI must allow the read permission to the targetcontrol or extop OIDs.

For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to use the Persistent Search request control with OID 2.16.840.1.113730.3.4.3 is:

aci: (targetcontrol = "2.16.840.1.113730.3.4.3")
 (version 3.0;acl "Request Persistent Search"; allow (read)
 (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)
     

11.2.2. Configuring ACIs

ACIs are defined in the data on aci attributes. They can be imported in LDIF and modified over LDAP. In order to make changes to ACIs, however, users first need the modify-acl privilege. By default, only the root DN user has the modify-acl privilege.

Global ACIs on cn=Access Control Handler,cn=config can be set using the dsconfig command. Global ACIs have attribute type ds-cfg-global-aci.

Modifying and removing global ACIs can have deleterious effects. Generally the impact depends on your deployment requirements. Modifications to global ACIs fall into the following categories:

  • Modification or removal is permitted.

    You must test client applications when deleting the specified ACI.

  • Modification or removal may affect applications.

    You must test client applications when modifying or deleting the specified ACI.

  • Modification or removal may affect applications, but is not recommended.

    You must test client applications when modifying or deleting the specified ACI.

  • Do not modify or delete.

For details, see "Default Global ACIs".

Default Global ACIs
NameDescriptionACI Definition

Anonymous control access

Anonymous and authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="2.16.840.1.113730.3.4.2 || 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || 2.16.840.1.113730.3.4.16 || 1.2.840.113556.1.4.1413 || 1.3.6.1.4.1.36733.2.1.5.1") (version 3.0; acl "Anonymous control access"; allow(read) userdn="ldap:///anyone";)

Anonymous control access

Anonymous and authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="2.16.840.1.113730.3.4.2 || 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || 2.16.840.1.113730.3.4.16 || 1.2.840.113556.1.4.1413 || 1.3.6.1.4.1.36733.2.1.5.1") (version 3.0; acl "Anonymous control access"; allow(read) userdn="ldap:///anyone";)

Anonymous control access

Anonymous and authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="2.16.840.1.113730.3.4.2 || 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || 2.16.840.1.113730.3.4.16 || 1.2.840.113556.1.4.1413 || 1.3.6.1.4.1.36733.2.1.5.1") (version 3.0; acl "Anonymous control access"; allow(read) userdn="ldap:///anyone";)

Anonymous extended operation access

Anonymous and authenticated users can request the LDAP extended operations that are specified by OID. Modification or removal may affect applications.

(extop="1.3.6.1.4.1.26027.1.6.1 || 1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.4203.1.11.1 || 1.3.6.1.4.1.1466.20037 || 1.3.6.1.4.1.4203.1.11.3") (version 3.0; acl "Anonymous extended operation access"; allow(read) userdn="ldap:///anyone";)

Anonymous extended operation access

Anonymous and authenticated users can request the LDAP extended operations that are specified by OID. Modification or removal may affect applications.

(extop="1.3.6.1.4.1.26027.1.6.1 || 1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.4203.1.11.1 || 1.3.6.1.4.1.1466.20037 || 1.3.6.1.4.1.4203.1.11.3") (version 3.0; acl "Anonymous extended operation access"; allow(read) userdn="ldap:///anyone";)

Anonymous extended operation access

Anonymous and authenticated users can request the LDAP extended operations that are specified by OID. Modification or removal may affect applications.

(extop="1.3.6.1.4.1.26027.1.6.1 || 1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.4203.1.11.1 || 1.3.6.1.4.1.1466.20037 || 1.3.6.1.4.1.4203.1.11.3") (version 3.0; acl "Anonymous extended operation access"; allow(read) userdn="ldap:///anyone";)

Anonymous read access

Anonymous and authenticated users can read the user data attributes that are specified by their names. Modification or removal is permitted.

(targetattr!="userPassword||authPassword||debugsearchindex||changes||changeNumber||changeType||changeTime||targetDN||newRDN||newSuperior||deleteOldRDN")(version 3.0; acl "Anonymous read access"; allow (read,search,compare) userdn="ldap:///anyone";)

Anonymous read access

Anonymous and authenticated users can read the user data attributes that are specified by their names. Modification or removal is permitted.

(targetattr!="userPassword||authPassword||debugsearchindex||changes||changeNumber||changeType||changeTime||targetDN||newRDN||newSuperior||deleteOldRDN")(version 3.0; acl "Anonymous read access"; allow (read,search,compare) userdn="ldap:///anyone";)

Anonymous read access

Anonymous and authenticated users can read the user data attributes that are specified by their names. Modification or removal is permitted.

(targetattr!="userPassword||authPassword||debugsearchindex||changes||changeNumber||changeType||changeTime||targetDN||newRDN||newSuperior||deleteOldRDN")(version 3.0; acl "Anonymous read access"; allow (read,search,compare) userdn="ldap:///anyone";)

Authenticated users control access

Authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="1.3.6.1.1.12 || 1.3.6.1.1.13.1 || 1.3.6.1.1.13.2 || 1.2.840.113556.1.4.319 || 1.2.826.0.1.3344810.2.3 || 2.16.840.1.113730.3.4.18 || 2.16.840.1.113730.3.4.9 || 1.2.840.113556.1.4.473 || 1.3.6.1.4.1.42.2.27.9.5.9") (version 3.0; acl "Authenticated users control access"; allow(read) userdn="ldap:///all";)

Authenticated users control access

Authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="1.3.6.1.1.12 || 1.3.6.1.1.13.1 || 1.3.6.1.1.13.2 || 1.2.840.113556.1.4.319 || 1.2.826.0.1.3344810.2.3 || 2.16.840.1.113730.3.4.18 || 2.16.840.1.113730.3.4.9 || 1.2.840.113556.1.4.473 || 1.3.6.1.4.1.42.2.27.9.5.9") (version 3.0; acl "Authenticated users control access"; allow(read) userdn="ldap:///all";)

Authenticated users control access

Authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="1.3.6.1.1.12 || 1.3.6.1.1.13.1 || 1.3.6.1.1.13.2 || 1.2.840.113556.1.4.319 || 1.2.826.0.1.3344810.2.3 || 2.16.840.1.113730.3.4.18 || 2.16.840.1.113730.3.4.9 || 1.2.840.113556.1.4.473 || 1.3.6.1.4.1.42.2.27.9.5.9") (version 3.0; acl "Authenticated users control access"; allow(read) userdn="ldap:///all";)

Self entry modification

Authenticated users can modify the specified attributes on their own entries. Modification or removal is permitted.

(targetattr="audio||authPassword||description||displayName||givenName||homePhone||homePostalAddress||initials||jpegPhoto||labeledURI||mobile||pager||postalAddress||postalCode||preferredLanguage||telephoneNumber||userPassword")(version 3.0; acl "Self entry modification"; allow (write) userdn="ldap:///self";)

Self entry modification

Authenticated users can modify the specified attributes on their own entries. Modification or removal is permitted.

(targetattr="audio||authPassword||description||displayName||givenName||homePhone||homePostalAddress||initials||jpegPhoto||labeledURI||mobile||pager||postalAddress||postalCode||preferredLanguage||telephoneNumber||userPassword")(version 3.0; acl "Self entry modification"; allow (write) userdn="ldap:///self";)

Self entry modification

Authenticated users can modify the specified attributes on their own entries. Modification or removal is permitted.

(targetattr="audio||authPassword||description||displayName||givenName||homePhone||homePostalAddress||initials||jpegPhoto||labeledURI||mobile||pager||postalAddress||postalCode||preferredLanguage||telephoneNumber||userPassword")(version 3.0; acl "Self entry modification"; allow (write) userdn="ldap:///self";)

Self entry read

Authenticated users can read the password values on their own entries. By default, the server applies a one-way hash algorithm to the password value before writing it to the entry, so it is computationally difficult to recover the cleartext version of the password from the stored value. Modification or removal is permitted.

(targetattr="userPassword||authPassword")(version 3.0; acl "Self entry read"; allow (read,search,compare) userdn="ldap:///self";)

Self entry read

Authenticated users can read the password values on their own entries. By default, the server applies a one-way hash algorithm to the password value before writing it to the entry, so it is computationally difficult to recover the cleartext version of the password from the stored value. Modification or removal is permitted.

(targetattr="userPassword||authPassword")(version 3.0; acl "Self entry read"; allow (read,search,compare) userdn="ldap:///self";)

Self entry read

Authenticated users can read the password values on their own entries. By default, the server applies a one-way hash algorithm to the password value before writing it to the entry, so it is computationally difficult to recover the cleartext version of the password from the stored value. Modification or removal is permitted.

(targetattr="userPassword||authPassword")(version 3.0; acl "Self entry read"; allow (read,search,compare) userdn="ldap:///self";)

User-Visible Operational Attributes

Anonymous and authenticated users can read attributes that identify entries and that contain information about modifications to entries. Modification or removal may affect applications.

(targetattr="createTimestamp||creatorsName||modifiersName||modifyTimestamp||entryDN||entryUUID||subschemaSubentry||etag||governingStructureRule||structuralObjectClass||hasSubordinates||numSubordinates||isMemberOf")(version 3.0; acl "User-Visible Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Operational Attributes

Anonymous and authenticated users can read attributes that identify entries and that contain information about modifications to entries. Modification or removal may affect applications.

(targetattr="createTimestamp||creatorsName||modifiersName||modifyTimestamp||entryDN||entryUUID||subschemaSubentry||etag||governingStructureRule||structuralObjectClass||hasSubordinates||numSubordinates||isMemberOf")(version 3.0; acl "User-Visible Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Operational Attributes

Anonymous and authenticated users can read attributes that identify entries and that contain information about modifications to entries. Modification or removal may affect applications.

(targetattr="createTimestamp||creatorsName||modifiersName||modifyTimestamp||entryDN||entryUUID||subschemaSubentry||etag||governingStructureRule||structuralObjectClass||hasSubordinates||numSubordinates||isMemberOf")(version 3.0; acl "User-Visible Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Root DSE Operational Attributes

Anonymous and authenticated users can read attributes that describe what the server supports. Modification or removal may affect applications.

(target="ldap:///")(targetscope="base")(targetattr="objectClass||namingContexts||supportedAuthPasswordSchemes||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||vendorName||vendorVersion")(version 3.0; acl "User-Visible Root DSE Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Root DSE Operational Attributes

Anonymous and authenticated users can read attributes that describe what the server supports. Modification or removal may affect applications.

(target="ldap:///")(targetscope="base")(targetattr="objectClass||namingContexts||supportedAuthPasswordSchemes||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||vendorName||vendorVersion")(version 3.0; acl "User-Visible Root DSE Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Root DSE Operational Attributes

Anonymous and authenticated users can read attributes that describe what the server supports. Modification or removal may affect applications.

(target="ldap:///")(targetscope="base")(targetattr="objectClass||namingContexts||supportedAuthPasswordSchemes||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||vendorName||vendorVersion")(version 3.0; acl "User-Visible Root DSE Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Schema Operational Attributes

Anonymous and authenticated users can read LDAP schema definitions. Modification or removal may affect applications.

(target="ldap:///cn=schema")(targetscope="base")(targetattr="objectClass||attributeTypes||dITContentRules||dITStructureRules||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses")(version 3.0; acl "User-Visible Schema Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Schema Operational Attributes

Anonymous and authenticated users can read LDAP schema definitions. Modification or removal may affect applications.

(target="ldap:///cn=schema")(targetscope="base")(targetattr="objectClass||attributeTypes||dITContentRules||dITStructureRules||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses")(version 3.0; acl "User-Visible Schema Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Schema Operational Attributes

Anonymous and authenticated users can read LDAP schema definitions. Modification or removal may affect applications.

(target="ldap:///cn=schema")(targetscope="base")(targetattr="objectClass||attributeTypes||dITContentRules||dITStructureRules||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses")(version 3.0; acl "User-Visible Schema Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)


Users with write access to add ACIs and with the modify-acl privilege can use the ldapmodify command to change ACIs located in user data.

This section focuses on ACI examples, rather than demonstrating how to update the directory for each example. To update ACIs, either change them using the ldapmodify command, or using OpenDJ control panel.

If you use OpenDJ control panel, find the entry to modify in the Manage Entries window. Then try View > LDIF View to edit the entry. The control panel checks ACI syntax and identifies errors before saving any changes.

For hints on updating directory entries with the ldapmodify command, see "Modifying Entry Attributes" in the Developer's Guide. Keep in mind that the name of the ACI attribute is aci as shown in the examples that follow.

ACI: Anonymous Reads and Searches

This ACI makes all user attributes world-readable except password attributes:

aci: (target ="ldap:///dc=example,dc=com")
 (targetattr != "authPassword || userPassword")
 (version 3.0;acl "Anonymous read-search access";
 allow (read, search, compare)(userdn = "ldap:///anyone");)

ACI: Disable Anonymous Access

By default, an OpenDJ server denies access unless an ACI explicitly allows access. (This does not apply to the root DN user, cn=Directory Manager, who has the bypass-acl privilege.) By default, an OpenDJ server allows anonymous users to read public data and request certain controls and extended operations.

These default capabilities are defined in global ACIs, which you can read by using the following command:

$ dsconfig \
 get-access-control-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --property global-aci \
 --trustAll
  

You can disable anonymous access either by editing relevant global-aci properties, or by using the global server configuration property, reject-unauthenticated-requests. Editing relevant global-aci properties lets you take a fine-grained approach to limit anonymous access. Setting reject-unauthenticated-requests:true causes an OpenDJ server to reject all requests from clients who are not authenticated except bind requests and StartTLS requests.

To take a fine-grained approach, use the dsconfig command to edit global-aci properties. One of the most expedient ways to do this is to use the command interactively on one OpenDJ server, capturing the output to a script with the --commandFilePath script option, and then editing the script for use on other servers. With this approach, you can allow anonymous read access to the root DSE and to directory schemas so that clients do not have to authenticate to discover server capabilities, and also allow anonymous users access to request certain controls and extended operations:

#
# Edit Access Control Handler global-aci attributes, replacing
# userdn="ldap:///anyone" (anonymous) with userdn="ldap:///all" (authenticated)
# in "Anonymous read access" and "User-Visible Operational Attributes" ACIs.
#
# To make this change, you remove existing values, and add edited values:
#
$ dsconfig \
 set-access-control-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --remove global-aci:\(targetattr!=\"userPassword\|\|authPassword\|\|debugsearchindex\|\|changes\|\|changeNumber\|\|changeType\|\|changeTime\|\|targetDN\|\|newRDN\|\|newSuperior\|\|deleteOldRDN\"\)\(version\ 3.0\;\ acl\ \"Anonymous\ read\ access\"\;\ allow\ \(read,search,compare\)\ userdn=\"ldap:///anyone\"\;\) \
 --remove global-aci:\(targetattr=\"createTimestamp\|\|creatorsName\|\|modifiersName\|\|modifyTimestamp\|\|entryDN\|\|entryUUID\|\|subschemaSubentry\|\|etag\|\|governingStructureRule\|\|structuralObjectClass\|\|hasSubordinates\|\|numSubordinates\|\|isMemberOf\"\)\(version\ 3.0\;\ acl\ \"User-Visible\ Operational\ Attributes\"\;\ allow\ \(read,search,compare\)\ userdn=\"ldap:///anyone\"\;\) \
 --add global-aci:\(targetattr!=\"userPassword\|\|authPassword\|\|debugsearchindex\|\|changes\|\|changeNumber\|\|changeType\|\|changeTime\|\|targetDN\|\|newRDN\|\|newSuperior\|\|deleteOldRDN\"\)\(version\ 3.0\;\ acl\ \"Anonymous\ read\ access\"\;\ allow\ \(read,search,compare\)\ userdn=\"ldap:///all\"\;\) \
 --add global-aci:\(targetattr=\"createTimestamp\|\|creatorsName\|\|modifiersName\|\|modifyTimestamp\|\|entryDN\|\|entryUUID\|\|subschemaSubentry\|\|etag\|\|governingStructureRule\|\|structuralObjectClass\|\|hasSubordinates\|\|numSubordinates\|\|isMemberOf\"\)\(version\ 3.0\;\ acl\ \"User-Visible\ Operational\ Attributes\"\;\ allow\ \(read,search,compare\)\ userdn=\"ldap:///all\"\;\) \
 --trustAll \
 --no-prompt
  

Make sure that you also set appropriate ACIs on any data that you import. The following commands prevent anonymous reads of Example.com data:

$ cat remove-anon.ldif
dn: dc=example,dc=com
changetype: modify
delete: aci
aci: (target ="ldap:///dc=example,dc=com")(targetattr !="userPassword")(version 3.0;acl "Anonymous read-search access";allow (read, search, compare)(userdn = "ldap:///anyone");)
-
add: aci
aci: (target ="ldap:///dc=example,dc=com")(targetattr !="userPassword")(version 3.0;acl "Anonymous read-search access";allow (read, search, compare)(userdn = "ldap:///all");)

$ ldapmodify \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 remove-anon.ldif
  

At this point, clients must authenticate to view search results:

$ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)"
$ ldapsearch  \
 --port 1389 \
 --bindDN uid=bjensen,ou=people,dc=example,dc=com \
 --bindPassword hifalutin \
 --baseDN dc=example,dc=com \
 "(uid=bjensen)" cn uid
dn: uid=bjensen,ou=People,dc=example,dc=com
cn: Barbara Jensen
cn: Babs Jensen
uid: bjensen
  

To reject anonymous access except bind and StartTLS requests, set reject-unauthenticated-requests:true:

$ dsconfig \
 set-global-configuration-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --set reject-unauthenticated-requests:true \
 --trustAll \
 --no-prompt
  

Once you set the property, anonymous clients trying to search, for example, get an Unwilling to Perform response from an OpenDJ server:

$ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)"
# The LDAP search request failed: 53 (Unwilling to Perform)
# Additional Information:  Rejecting the requested operation because the connection has not been authenticated
  

In both cases, notice that the changes apply to a single OpenDJ server configuration, and so are never replicated to other servers. You must apply the changes separately to each replicated server.


ACI: Full Access for Administrators

The following ACI gives a group of Directory Administrators full access. Some administrative operations will also require privileges not shown in this example:

aci: (target="ldap:///dc=example,dc=com")
 (targetattr = "* || +")
 (version 3.0;acl "Admins can run amok";
  allow(all, proxy, import, export)
  groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com";)

targetattr = "* || +" permits access to all user attributes and all operational attributes. allow(all, proxy, import, export) permits all user operations, proxy authorization, and modify DN operations.


ACI: Change Your Password

By default, the right to change one's own password is set in a global ACI. This ACI reproduces the same effect:

aci: (target ="ldap:///ou=People,dc=example,dc=com")
 (targetattr = "authPassword || userPassword")
 (version 3.0;acl "Allow users to change pass words";
   allow (write)(userdn = "ldap:///self");)
  

ACI: Manage Your Group Membership

For some static groups, such as carpoolers and social club members, you might choose to let users manage their own memberships. The following ACI lets members of self-service groups manage their own membership:

aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")
 (targetattr = "member")
 (version 3.0;acl "Self registration"; allow(selfwrite)
 (userdn = "ldap:///uid=*,ou=People,dc=example,dc=com");)
  

ACI: Manage Self-Service Groups

This ACI lets users create and delete self-managed groups:

aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")
 (targattrfilters="add=objectClass:(objectClass=groupOfNames)")
 (version 3.0; acl "All can create self service groups";
   allow (add)(userdn= "ldap:///uid=*,ou=People,dc=example,dc=com");)
aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")
 (version 3.0; acl "Owner can delete self service groups";
   allow (delete)(userattr= "owner#USERDN");)
  

ACI: Permit Cleartext Access Over Loopback Only

This ACI uses IP address and Security Strength Factor subjects:

aci: (target = "ldap:///dc=example,dc=com")
 (targetattr = "*")
 (version 3.0;acl "Use loopback only for LDAP in the clear";
   deny (all)(ip != "127.0.0.1" and ssf <= "1");)
  

When you use TLS but have not configured a cipher, ssf is one. Packets are checksummed for integrity checking, but all content is sent in cleartext.


ACI: Manage ACI Values

In order to update ACIs in directory data, a user must have both the modify-acl privilege and access to modify the aci operational attribute.

This ACI lets Directory Administrators manage aci values:

aci: (target = "ldap:///dc=example,dc=com")
 (targetattr = "aci") (version 3.0;acl "Modify ACIs"; allow (all)
 (groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com";)
  

11.2.3. About Global Access Control Policies

Global access control policies are similar to ACIs, but are implemented as entries in the server configuration, rather than attributes on entries. They are managed using the dsconfig command.

Unlike ACIs, policies can only allow access, not deny it. This constraint makes them easier to read and to change in isolation. Policies are, however, applied in addition to ACIs and privileges. It is still possible that an ACI could deny something allowed by a policy.

By default, no access is allowed until permitted by a policy or other access control. By default, a policy matches all entries, all types of connection, and all users. You set the properties of the policy to restrict its scope of application. Policies can have the settings to allow the following:

  • Requests for specified LDAP controls and extended operations

  • Access to specific attributes, with support for wildcards, @objectclass notation, and exceptions to simplify settings

  • Read access (for read, search, and compare operations)

  • Write access (for add, delete, modify, and modify DN operations)

  • Making authentication required or not before requesting an operation

  • Requests targeting a particular scope, with wildcards to simplify settings

  • Requests originating or not from specific client addresses or domains

  • Requests using a specified protocol

  • Requests using a specified port

  • Requests using a minimum security strength factor

  • Requests from a user whose DN does or does not match a DN pattern

For details, see the reference documentation concerning Global access control policies.

11.2.4. Configuring Global Access Control Policies

You manage global access control policies with the dsconfig command. As the policies are part of the server configuration, they are not replicated, and must be configured on each server.

Example Policy: Rejecting Unauthenticated Requests

The following example replaces the default policies that allow anonymous access and authenticated access with a single policy for authenticated access. This example then adds a policy to allow anonymous access to use the StartTLS and Get Symmetric Key extended operations. It does not change the default policy that allows anonymous access to read root DSE operational attributes, as that information should remain publicly readable in most deployments:

$ dsconfig \
 delete-global-access-control-policy \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Anonymous access all entries" \
 --trustAll \
 --no-prompt
$ dsconfig \
 delete-global-access-control-policy \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Authenticated access all entries" \
 --trustAll \
 --no-prompt
$ dsconfig \
 create-global-access-control-policy \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Authenticated access all entries" \
 --set authentication-required:true \
 --set request-target-dn-not-equal-to:"**,cn=changelog" \
 --set permission:read \
 --set allowed-attribute:"*" \
 --set allowed-attribute:createTimestamp \
 --set allowed-attribute:creatorsName \
 --set allowed-attribute:entryDN \
 --set allowed-attribute:entryUUID \
 --set allowed-attribute:etag \
 --set allowed-attribute:governingStructureRule \
 --set allowed-attribute:hasSubordinates \
 --set allowed-attribute:isMemberOf \
 --set allowed-attribute:modifiersName \
 --set allowed-attribute:modifyTimestamp \
 --set allowed-attribute:numSubordinates \
 --set allowed-attribute:structuralObjectClass \
 --set allowed-attribute:subschemaSubentry \
 --set allowed-attribute-exception:authPassword \
 --set allowed-attribute-exception:userPassword \
 --set allowed-attribute-exception:debugSearchIndex \
 --set allowed-attribute-exception:@changeLogEntry \
 --set allowed-control:Assertion \
 --set allowed-control:AuthorizationIdentity \
 --set allowed-control:Csn \
 --set allowed-control:ManageDsaIt \
 --set allowed-control:MatchedValues \
 --set allowed-control:Noop \
 --set allowed-control:PasswordPolicy \
 --set allowed-control:PermissiveModify \
 --set allowed-control:PostRead \
 --set allowed-control:PreRead \
 --set allowed-control:ProxiedAuthV2 \
 --set allowed-control:RealAttributesOnly \
 --set allowed-control:ServerSideSort \
 --set allowed-control:SimplePagedResults \
 --set allowed-control:TransactionId \
 --set allowed-control:VirtualAttributesOnly \
 --set allowed-control:Vlv \
 --set allowed-extended-operation:GetSymmetricKey \
 --set allowed-extended-operation:PasswordModify \
 --set allowed-extended-operation:PasswordPolicyState \
 --set allowed-extended-operation:StartTls \
 --set allowed-extended-operation:WhoAmI \
 --trustAll \
 --no-prompt
$ dsconfig \
 create-global-access-control-policy \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Anonymous extended operation access" \
 --set authentication-required:false \
 --set allowed-extended-operation:GetSymmetricKey \
 --set allowed-extended-operation:StartTls \
 --trustAll \
 --no-prompt
  

Example Policy: Require Secure Connections

The following example creates a policy with a minimum security strength factor of 128, effectively allowing only secure connections for requests targeting data in dc=example,dc=com. A security strength factor defines the key strength for DIGEST-MD5, GSSAPI, SSL, and TLS:

$ dsconfig \
 create-global-access-control-policy \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Require secure connections for example.com data" \
 --set request-target-dn-equal-to:"**,dc=example,dc=com" \
 --set request-target-dn-equal-to:dc=example,dc=com \
 --set connection-minimum-ssf:128 \
 --trustAll \
 --no-prompt
  

Example Policy: Allow Anonymous Requests From Specific Network

The following example updates policies that allow anonymous requests so they are scoped to apply to clients in the example.com domain:

$ dsconfig \
 set-global-access-control-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Anonymous extended operation access" \
 --set connection-client-address-equal-to:.example.com \
 --trustAll \
 --no-prompt
$ dsconfig \
 set-global-access-control-policy-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --policy-name "Root DSE access" \
 --set connection-client-address-equal-to:.example.com \
 --trustAll \
 --no-prompt
  

With the connection-client-address-not-equal-to property, it is also possible to reject requests from a particular host, domain, address, or address mask.


For additional details, see the reference documentation concerning Global access control policies.

11.3. Preventing Access While Fixing Issues

Misconfiguration can potentially put an OpenDJ server in a state where you must intervene, and where you need to prevent users and applications from accessing the directory until you are done fixing the problem.

OpenDJ servers provide a lockdown mode that allows connections only on the loopback address, and allows only operations requested by root DN users, such as cn=Directory Manager. You can use lockdown mode to prevent all but administrative access while you repair a server.

To put an OpenDJ server into lockdown mode, the server must be running. You cause the server to enter lockdown mode by using a task. Notice that the modify operation is performed over the loopback address (accessing the OpenDJ server on the local host):

$ cat enter-lockdown.ldif
dn: ds-task-id=Enter Lockdown Mode,cn=Scheduled Tasks,cn=tasks
objectClass: top
objectClass: ds-task
ds-task-id: Enter Lockdown Mode
ds-task-class-name: org.opends.server.tasks.EnterLockdownModeTask

$ ldapmodify \
 --hostname localhost \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 enter-lockdown.ldif
 

The OpenDJ server logs a notice message in logs/errors when lockdown mode takes effect:

...msg=Lockdown task Enter Lockdown Mode finished execution

Client applications that request operations get a message concerning lockdown mode:

$ ldapsearch --port 1389 --baseDN "" --searchScope base "(objectclass=*)" +
The LDAP search request failed: 53 (Unwilling to Perform)
Additional Information:  Rejecting the requested operation because the server
is in lockdown mode and will only accept requests from root users over
loopback connections
 

You also leave lockdown mode by using a task:

$ cat leave-lockdown.ldif
dn: ds-task-id=Enter Lockdown Mode,cn=Scheduled Tasks,cn=tasks
objectClass: top
objectClass: ds-task
ds-task-id: Enter Lockdown Mode
ds-task-class-name: org.opends.server.tasks.EnterLockdownModeTask

$ ldapmodify \
 --hostname localhost \
 --port 1389 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 leave-lockdown.ldif
 

The OpenDJ server logs a notice message when leaving lockdown mode:

...msg=Leave Lockdown task Leave Lockdown Mode finished execution

Chapter 12. Protecting Directory Files

This chapter describes ways to secure sensitive data that is stored in files. In this chapter you will learn to:

  • Use data confidentiality to protect backend database files

  • Use appropriate file system permissions

In addition to the mechanisms described in this chapter, help prevent unauthorized access to keystore PIN codes, passwords used to authenticate to an OpenDJ server, and passwords in backend database files by handling them securely. For details, see "Use Appropriate Password Storage and Password Policies".

12.1. Encrypting Directory Data

An OpenDJ directory server can encrypt directory data before storing it in a database backend on disk, keeping the data confidential until it is accessed by a directory client.

Data encryption is useful for at least the following cases:

Ensuring Confidentiality and Integrity

Encrypted directory data is confidential, remaining private until decrypted with a proper key.

Encryption ensures data integrity at the moment it is accessed. An OpenDJ directory cannot decrypt corrupted data.

Protection on a Shared Infrastructure

When you deploy directory services on a shared infrastructure you relinquish full and sole control of directory data.

For example, if an OpenDJ directory server runs in the cloud, or in a data center with shared disks, the file system and disk management are not under your control.

Data confidentiality and encryption come with the following trade-offs:

Equality Indexes Limited to Equality Matching

When an equality index is configured without confidentiality, the values can be maintained in sorted order. A non-confidential, cleartext equality index can therefore be used for searches that require ordering and searches that match an initial substring.

An example of a search that requires ordering is a search with a filter "(cn<=App)". The filter matches entries with commonName up to those starting with App (case-insensitive) in alphabetical order.

An example of a search that matches an initial substring is a search with a filter "(cn=A*)". The filter matches entries having a commonName that starts with a (case-insensitive).

In an equality index with confidentiality enabled, the OpenDJ directory server no longer sorts cleartext values. As a result, you must accept that ordering and initial substring searches are unindexed.

Performance Impact

Encryption and decryption requires more processing than handling cleartext values.

Encrypted values also take up more space than cleartext values.

Replication Configuration Before Encryption

A directory server provides data confidentiality without requiring you to supply a key for encryption and decryption. It encrypts the data using a symmetric key stored under cn=admin data in the admin-backend. The symmetric key is encrypted in turn with the server's public key also stored there. When multiple servers are configured to replicate data as described in "Managing Data Replication" in the Administration Guide, the servers replicate the keys as well, allowing any server replica to decrypt any other replica's encrypted data.

The directory server generates a secret key the first time it must encrypt data. That key is then shared across the replication topology as described above, or until it is marked as compromised. (For details regarding compromised keys, see "Handling Compromised Keys" in the Administration Guide.)

When you configure replication, the source server overwrites cn=admin data in the destination server. This data includes any secret keys stored there by the destination server.

Therefore, if you configure data confidentiality before replication, the destination server's keys disappear when you configure replication. The destination server can no longer decrypt any of its data.

To prevent this problem, always configure replication before configuring data confidentiality.

As explained in "Protect OpenDJ Server Files", an OpenDJ directory server does not encrypt directory data by default. This means that any user with system access to read directory files can potentially access directory data in cleartext.

You can verify what a system user could see with read access to backend database files by using the backendstat dump-raw-db command. The backendstat subcommands list-raw-dbs and dump-raw-db help you list and view the low-level databases within a backend. Unlike the output of other subcommands, the output of the dump-raw-db subcommand is neither decrypted nor formatted for readability. Instead, you can see values as they are stored in the backend file.

In a backend database, the id2entry index holds LDIF representations of directory entries. For a database that is not encrypted, the corresponding low-level database shows the cleartext strings, as is evident in the following example:

$ stop-ds --quiet
$ backendstat list-raw-dbs --backendId userRoot
...
/dc=com,dc=example/id2entry...
...
$ backendstat \
 dump-raw-db \
 --backendId userRoot \
 --dbName /dc=com,dc=example/id2entry
...
Key (len 8):
 00 00 00 00 00 00 00 1E                          ........
 Value (len 437):
 02 00 81 B1 03 01 06 27 75 69 64 3D 62 6A 65 6E  .......'uid=bjen
 73 65 6E 2C 6F 75 3D 50 65 6F 70 6C 65 2C 64 63  sen,ou=People,dc
 3D 65 78 61 6D 70 6C 65 2C 64 63 3D 63 6F 6D 01  =example,dc=com.
 06 11 01 08 01 13 62 6A 65 6E 73 65 6E 40 65 78  ......bjensen@ex
 61 6D 70 6C 65 2E 63 6F 6D 01 09 01 04 30 32 30  ample.com....020
 39 01 16 01 0C 65 6E 2C 20 6B 6F 3B 71 3D 30 2E  9....en, ko;q=0.
 38 01 10 01 29 75 69 64 3D 74 72 69 67 64 65 6E  8...)uid=trigden
 2C 20 6F 75 3D 50 65 6F 70 6C 65 2C 20 64 63 3D  , ou=People, dc=
 65 78 61 6D 70 6C 65 2C 64 63 3D 63 6F 6D 01 04  example,dc=com..
 02 13 50 72 6F 64 75 63 74 20 44 65 76 65 6C 6F  ..Product Develo
 70 6D 65 6E 74 06 50 65 6F 70 6C 65 01 0B 01 07  pment.People....
 42 61 72 62 61 72 61 01 0C 01 0F 2B 31 20 34 30  Barbara....+1 40
 38 20 35 35 35 20 31 38 36 32 01 0D 01 06 4A 65  8 555 1862....Je
 6E 73 65 6E 01 07 02 0E 42 61 72 62 61 72 61 20  nsen....Barbara
 4A 65 6E 73 65 6E 0B 42 61 62 73 20 4A 65 6E 73  Jensen.Babs Jens
 65 6E 01 0E 01 0D 2F 68 6F 6D 65 2F 62 6A 65 6E  en..../home/bjen
 73 65 6E 01 0F 01 0F 2B 31 20 34 30 38 20 35 35  sen....+1 408 55
 35 20 31 39 39 32 01 11 01 04 31 30 30 30 01 12  5 1992....1000..
 01 2E 7B 53 53 48 41 7D 33 45 66 54 62 33 70 37  ..{SSHA}3EfTb3p7
 71 75 6F 75 73 4B 35 34 2B 41 4F 34 71 44 57 6C  quousK54+AO4qDWl
 56 33 4F 39 54 58 48 57 49 4A 49 32 4E 41 3D 3D  V3O9TXHWIJI2NA==
 01 13 01 04 31 30 37 36 01 05 01 14 4F 72 69 67  ....1076....Orig
 69 6E 61 6C 20 64 65 73 63 72 69 70 74 69 6F 6E  inal description
 01 14 01 07 62 6A 65 6E 73 65 6E 01 15 01 0D 53  ....bjensen....S
 61 6E 20 46 72 61 6E 63 69 73 63 6F 01 01 02 01  an Francisco....
 24 38 38 37 37 33 32 65 38 2D 33 64 62 32 2D 33  $887732e8-3db2-3
 31 62 62 2D 62 33 32 39 2D 32 30 63 64 36 66 63  1bb-b329-20cd6fc
 65 63 63 30 35                                   ecc05
...
 

To maintain data confidentiality on disk, you must configure it explicitly. In addition to preventing read access by other users as described in "Setting Up a System Account for an OpenDJ Server", you can configure confidentiality for database backends. When confidentiality is enabled for a backend, an OpenDJ directory server encrypts entries before storing them in the backend.

Important

Encrypting stored directory data does not prevent it from being sent over the network in the clear.

Apply the suggestions in "Securing Network Connections" to protect data sent over the network.

Enable backend confidentiality with the default encryption settings as shown in the following example that applies to the userRoot backend:

$ dsconfig \
 set-backend-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --backend-name userRoot \
 --set confidentiality-enabled:true \
 --no-prompt \
 --trustAll
 

After confidentiality is enabled, entries are encrypted when next written. That is, an OpenDJ directory server does not automatically rewrite all entries in encrypted form. Instead, it encrypts each entry on update, for example, when a user updates their entry or when you import data.

If you import the data again after enabling confidentiality, you can see with the backendstat dump-raw-db command that the low-level database for id2index no longer contains cleartext:

$ stop-ds --quiet
$ import-ldif \
 --offline \
 --backendID userRoot \
 --includeBranch dc=example,dc=com \
 --ldifFile Example.ldif
$ backendstat \
 dump-raw-db \
 --backendId userRoot \
 --dbName /dc=com,dc=example/id2entry
...
Key (len 8):
 00 00 00 00 00 00 00 C2                          ........
 Value (len 437):
 02 02 81 82 01 C4 95 87 5B A5 2E 47 97 80 23 F4  ........[..G..#.
 CE 5D 93 25 97 D4 13 F9 0A A3 A8 31 9A D9 7A 70  .].%.......1..zp
 FE 3E AC 9D 64 41 EB 7B D5 7F 7E B8 B7 74 52 B8  .>..dA.{.^?~..tR.
 C7 7F C8 79 19 46 7D C5 5D 5B 83 9C 5B 9F 85 28  .^?.y.F}.][..[..(
 83 A2 5F A0 C1 B1 09 FC 2F E3 D8 82 4A AA 8B D9  .._...../...J...
 78 43 34 50 AE A1 52 88 5B 70 97 D2 E1 EA 87 CA  xC4P..R.[p......
 3B 4D 07 DC F9 F8 30 BB D2 76 51 C8 75 FF FA 80  ;M....0..vQ.u...
 77 E1 6A 8B 5B 8F DA A4 F4 0B B5 20 56 B3 19 19  w.j.[...... V...
 22 D8 9D 38 04 E3 4D 94 A7 99 4B 81 16 AD 88 46  "..8..M...K....F
 FC 3F 7E 78 66 B8 D1 E9 86 A0 F3 AC B6 68 0D A9  .?~xf........h..
 9A A7 3C 30 40 37 97 4E 90 DD 63 16 8E 11 0F 5E  ..<0@7.N..c....^
 9D 5B 86 90 AF 4E E2 1F 9E 70 73 14 0A 11 5C DB  .[...N...ps...\.
 B7 BC B8 A9 31 3F 74 8D 0A 9F F4 6C E1 B0 36 78  ....1?t....l..6x
 F0 5A 5E CD 7C B3 A2 36 66 8E 88 86 A0 8B 9A 77  .Z^.|..6f......w
 D5 CD 7E 9C 4E 62 20 0E D0 DB AD E7 7E 99 46 4F  ..~.Nb .....~.FO
 67 C7 A6 7E 2C 24 82 50 51 9F A7 B2 02 44 5B 30  g..~,$.PQ....D[0
 74 41 99 D9 83 69 EF AE 2E C0 FF C4 E6 4F F2 2F  tA...i.......O./
 95 FB 93 65 30 2A 2D 8D 20 88 83 B5 DE 35 B6 20  ...e0*-. ....5.
 47 17 30 25 60 FD E3 43 B9 D6 A4 F7 47 B6 6C 9F  G.0%`..C....G.l.
 47 FD 63 8E 7F A5 00 CE 6C 3E BC 95 23 69 ED D0  G.c.^?...l>..#i..
 69 4F BE 61 BD 30 C2 40 66 F6 F9 C3 3E C1 D7 8C  iO.a.0.@f...>...
 B0 C8 4A 2E 27 BE 13 6C 40 88 B0 13 A3 12 F4 50  ..J.'..l@......P
 CA 92 D8 EB 4A E5 3F E2 64 A3 76 C7 5C 2B D8 89  ....J.?.d.v.\+..
 A3 6E C1 F7 0A C2 37 7A BD AF 14 4B 52 04 6B F2  .n....7z...KR.k.
 8F 4F C3 F8 00 90 BA 0F EC 6D B1 2D A8 18 0C A6  .O.......m.-....
 29 96 82 3B 5C BC D0 F4 2B BE 9C C5 8B 18 7A DE  )..;\...+.....z.
 C7 B5 10 2D 45 50 4F 77 ED F7 23 34 95 AF C3 2E  ...-EPOw..#4....
 B0 9B FA E9 DF                                   .....
...
  

Similar checks can be run on other low-level databases if you enable confidentiality by backend indexes as described below.

The settings for data confidentiality depend on the encryption capabilities of the JVM. For example, for details about the Sun/Oracle Java implementation, see the explanations in javax.crypto.Cipher. You can accept the default settings, or choose to specify the following:

  • The cipher algorithm defining how the cleartext is encrypted and decrypted.

  • The cipher mode of operation defining how a block cipher algorithm should transform data larger than a single block.

  • The cipher padding defining how to pad the cleartext to reach appropriate size for the algorithm.

  • The cipher key length, where longer key lengths strengthen encryption at the cost of more performance impact.

The default settings for confidentiality are cipher-transformation: AES/CBC/PKCS5Padding and cipher-key-length: 128. This means the algorithm is the Advanced Encryption Standard (AES), the cipher mode is Cipher Block Chaining (CBC), and the padding is PKCS#5 padding as described in RFC 2898: PKCS #5: Password-Based Cryptography Specification. The syntax for the cipher-transformation is algorithm/mode/padding, and all three must be specified. When the algorithm does not require a mode, use NONE. When the algorithm does not require padding, use NoPadding. Use of larger cipher-key-length values can require that you install JCE policy files such as those for unlimited strength, as described in "Using Unlimited Strength Cryptography".

OpenDJ servers encrypt data using a symmetric key that is stored with the server configuration. The symmetric key is encrypted in turn with the server's public key that is also stored with the server configuration. When multiple servers are configured to replicate data as described in "Configuring Replication Settings" in the Administration Guide, the servers replicate the keys as well, allowing any server replica to decrypt the data.

In addition to entry encryption, you can enable confidentiality by backend index, as long as confidentiality is enabled for the backend itself. Confidentiality hashes keys for equality type indexes using SHA-1, and encrypts the list of entries matching a substring key for substring indexes. The following example shows how to enable confidentiality for the mail index:

$ dsconfig \
 set-backend-index-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --backend-name userRoot \
 --index-name mail \
 --set confidentiality-enabled:true \
 --no-prompt \
 --trustAll
  

After changing the index configuration, you can rebuild the index to enforce confidentiality immediately. For details, see "Configuring and Rebuilding Indexes" in the Administration Guide.

Avoid using sensitive attributes in VLV indexes. Confidentiality cannot be enabled for VLV indexes.

Encrypting and decrypting data comes with costs in terms of cryptographic processing that reduces throughput and of extra space for larger encrypted values. In general, tests with default settings show that the cost of enabling confidentiality can be quite modest, but your results can vary based on your systems and on the settings used for cipher-transformation and cipher-key-length. Make sure you test your deployment to qualify the impact of confidentiality before enabling it in production.

12.2. Setting Appropriate File Permissions

Appropriate file permissions grant access to authorized users and deny access by unauthorized users. For example, all users on the system might have access to run the ldapsearch command, but only a few users should be able to read the log files, and only the user running the OpenDJ server should be able to read a file containing a keystore PIN code.

When installing and setting up an OpenDJ server, you should use a system account specific to the server, as described in "Setting Up a System Account for an OpenDJ Server". Having a specific account makes it possible to set appropriate file permissions.

Many OpenDJ server file permissions depend on the software distribution, and not the UNIX file mode creation mask. For example, the server commands are generally executable by all users, and the PIN code files are read-write only for the server user. You can affect the file permissions for several types of server files. "File Permission Settings" indicates the impact of recommended permissions settings on these files.

File Permission Settings
SettingImpact

umask of 027

The UNIX umask setting defines the permissions applied when creating a file or a directory. See your system documentation for instructions on changing this setting.

A setting of 027 prevents members of other groups from reading backup files and ForgeRock Common Audit event log files, and from listing keystore contents.

Members of the server user's group can still read the files.

This setting can be useful when other processes read these files to process them independently. For example, other processes might copy backup files to a remote system, or parse the logs to look for particular patterns.

umask of 077

On UNIX systems, a setting of 077 prevents members of the server user's group from reading backup files and ForgeRock Common Audit event log files, and from listing keystore contents.

This setting can be useful when no other processes need access to those files.

Other users can still run commands delivered with the server.

log-file-permissions

This setting applies to a OpenDJ-native file-based log publishers on UNIX systems. It does not apply to Common Audit file-based log publishers. Its value is a UNIX mode string.

The impact of the setting is independent of the server user's umask setting.

The default for file-based log publishers is 640, unless the server was installed with the setup command option, --productionMode. A value of 640 allows other members of the server user's group to read the logs.

To prevent other members of the group from reading the logs produced by a publisher, set the property to 600. This is the setting used for a server set up using the --productionMode option.

Windows NTFS ACLs

On Windows systems, set folder ACLs on the NTFS volume where the server files are installed. Apply suitably restrictive permissions to folders such that they are inherited by all old and new files.

Consider setting ACLs on at least the following folders:

  • The backup folder, by default /path/to/opendj/bak.

  • The configuration folder, /path/to/opendj/config.

  • The logs folder, by default /path/to/opendj/logs.


Chapter 13. Best Practices for Client Applications

In many cases, you can influence or even control how client applications are configured to improve security. This chapter provides suggestions for such cases. In this chapter you will learn to:

  • Handle input securely

  • Use secure connections

  • Authenticate appropriately

  • Use OAuth 2.0 authorization where appropriate

  • Use proxied authorization where appropriate

  • Apply client-side resource limits

For general best practices for LDAP client applications, see "Best Practices For Application Developers" in the Developer's Guide.

13.1. Handle Input Securely

When taking input directly from a user or another program, handle the input securely by using appropriate methods to sanitize the data.

When writing command-line or HTTP clients, make sure you sanitize the input.

Failure to sanitize the input data can leave your application vulnerable to injection attacks.

13.2. Use Secure Connections

Use secure connections except when reading public information anonymously. Always use secure connections when sending credentials for authentication, and when reading or writing any data that is not public.

For LDAP applications, either connect to the directory server's LDAPS port, or if possible, begin each session with the StartTLS extended operation on the (cleartext) LDAP port.

For HTTP clients, use HTTPS.

13.3. Authenticate Appropriately

Unless your application only reads public information, authenticate to the directory server.

Use an account that is specific to your application when authenticating. This helps avoid risks involved in sharing credentials between accounts. Furthermore, it makes debugging easier by associating traces of your application's actions with its specific account.

LDAP applications can avoid username/password credentials by authenticating using digital certificates as described in "Authenticating Client Applications With a Certificate".

13.4. Use OAuth 2.0 If Appropriate

OpenDJ servers support OAuth 2.0 for HTTP authorization, where the directory acts as an OAuth 2.0 resource server as described in "To Set Up HTTP Authorization" in the Administration Guide.

An OAuth 2.0 client application gets authorization from the resource owner, such as the user, device, or thing whose account it needs to access, and presents the OAuth 2.0 bearer access token to get access to the account. This allows the HTTP application to access directory data through REST calls without having to have its own account.

Access tokens give the bearer access, regardless of the bearer's identity. Send access tokens only over secure HTTPS connections to prevent eavesdroppers from stealing the token.

13.5. Use Proxied Authorization If Appropriate

OpenDJ servers support the use of proxied authorization as described in "Configuring Proxied Authorization" in the Developer's Guide. With proxied authorization, an LDAP application binds to the directory using its own account, and sends requests on behalf of applications users by attaching the user authorization ID in a request control.

When the user is already safely authenticated by other means, proxied authorization makes it easy to reuse a connection that is dedicated and bound to the application.

13.6. Apply Resource Limits

LDAP client applications can set time limits and size limits on search requests to avoid overuse of server resources. Setting limits is appropriate when the searches your application performs are not fixed, but instead partially or fully determined by user input.

The OpenDJ ldapsearch command has --sizeLimit and --timeLimit options.

Chapter 14. Monitoring Directory Security

This chapter covers monitoring capabilities. In this chapter you will learn to:

  • Access monitoring information remotely using LDAP, SNMP, or JMX.

  • Monitor server status, including task status.

  • Configure logs and interpret the messages they contain.

  • Configure email settings for administrative alert notifications.

14.1. About Monitoring

Watching for security issues is only one of the reasons to monitor your directory service. Other reasons to monitor the directory service include:

  • Noticing availability problems as they occur.

    If a server becomes unresponsive, goes offline, or crashes, you can discover the problem quickly, and take corrective action.

  • Identifying how client applications use the directory service.

    You can parse directory access logs to determine what client applications do. This information helps you understand what is most important, and make decisions about indexing, for example.

    Access log messages can also provide evidence of security threats, and traces of insecure client application behavior.

  • Spotting performance problems, where the directory service does not meet habitual, expected, or formally defined functional, throughput, or response time characteristics.

    For example, if it suddenly becomes impossible to perform updates, the directory service has a performance problem. Alternatively, if a search that regularly completes in 500 milliseconds now takes 15 seconds, the directory service has a performance problem.

    A performance problem could also be evidence of a security threat.

Monitoring directory security is thus part of an overall monitoring strategy. Aim to answer at least the following questions when monitoring specifically for security problems:

  • What insecure client behaviors do you observe?

    Examples:

    • Attempts to send simple bind credentials over cleartext connections

    • Attempts to change passwords over cleartext connections

    • Attempts to change configuration over cleartext connections

  • What unusual or unexpected usage patterns do you observe?

    Examples:

    • Search requests that perform unindexed searches

    • Requests that hit resource limits

    • Unusually large numbers of bind requests that fail

    • Unusual large numbers of password change requests that fail

    • Unusual large numbers of account lockout events

  • Are you observing any sudden or hard-to-explain performance problems?

    Examples:

    • Unusual increases in throughput

    • Unusual increases in response times for typical requests

    • Servers suddenly starved for system resources

Keep in mind when you see evidence of what looks like a security problem that it might be explained by a mistake made by an administrator or an application developer. Whether the problem is due to malice or user error, you can nevertheless use monitoring information to guide corrective actions.

14.2. LDAP-Based Monitoring

OpenDJ servers publish monitoring information over LDAP under the entry cn=monitor. Many different types of information are exposed.

Interface stability: Evolving (See "ForgeRock Product Interface Stability" in the Reference)

The following example shows monitoring information for the userRoot backend holding Example.com data:

$ ldapsearch --port 1389 --baseDN cn=monitor "(cn=userRoot backend)"
dn: cn=userRoot backend,cn=Disk Space Monitor,cn=monitor
objectClass: top
objectClass: ds-monitor-entry
objectClass: extensibleObject
disk-dir: /path/to/opendj/db/userRoot
disk-free: <bytes>
disk-state: normal
cn: userRoot backend

dn: cn=userRoot Backend,cn=monitor
objectClass: top
objectClass: ds-monitor-entry
objectClass: ds-backend-monitor-entry
ds-backend-id: userRoot
ds-backend-base-dn: dc=example,dc=com
ds-backend-is-private: false
ds-backend-entry-count: <count>
ds-base-dn-entry-count: <count> dc=example,dc=com
ds-backend-writability-mode: enabled
cn: userRoot Backend
 

In production systems, set a global ACI or access policy to grant access to cn=monitor, rather than allowing anonymous access.

14.3. SNMP-Based Monitoring

OpenDJ servers support SNMP, including the Management Information Base described in RFC 2605: Directory Server Monitoring MIB.

SNMP is not enabled by default. SNMP-based monitoring depends on OpenDMK, which you must download and install separately. This requires that you accept the Binary License for Project OpenDMK.

To obtain the OpenDMK self-extracting .jar file, download and unpack the ForgeRock Directory Services 5.5 .zip distribution from ForgeRock BackStage.

To run the OpenDMK installer, use the self-extracting .jar file that is part of the unpacked download. The following example unpacks the ForgeRock Directory Services 5.5 files into the default opendj directory, and then starts the OpenDMK installer:

$ cd ~/Downloads/
$ unzip DS-5.5.0.zip
$ java -jar opendj/snmp/opendmk.jar
 

If you install under /path/to, then the runtime library needed for SNMP is /path/to/OpenDMK-bin/lib/jdmkrt.jar.

After installing OpenDMK, set up an SNMP connection handler that uses your installation of the OpenDMK jdmkrt.jar library:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "SNMP Connection Handler" \
 --set enabled:true \
 --set opendmk-jarfile:/path/to/OpenDMK-bin/lib/jdmkrt.jar \
 --trustAll \
 --no-prompt
 

By default, the SNMP connection handler listens on port 161 and uses port 162 for traps. On UNIX and Linux systems, only root can normally open these ports. To install as a normal user, change the listen and trap ports:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "SNMP Connection Handler" \
 --set listen-port:11161 \
 --set trap-port:11162 \
 --trustAll \
 --no-prompt
 

Restart the SNMP connection handler to take the changes into account:

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "SNMP Connection Handler" \
 --set enabled:false \
 --trustAll \
 --no-prompt

$ dsconfig \
 set-connection-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "SNMP Connection Handler" \
 --set enabled:true \
 --trustAll \
 --no-prompt
 

To check that the response on the SNMP listen port, use a command such as snmpwalk:

$ snmpwalk -v 2c -c OpenDJ@OpenDJ localhost:11161
SNMPv2-SMI::mib-2.66.1.1.1.1 = STRING: "OpenDJ 4.0.0..."
SNMPv2-SMI::mib-2.66.1.1.2.1 = STRING: "/path/to/opendj"
...
 

14.4. JMX-Based Monitoring

OpenDJ servers support JMX-based monitoring. A number of tools support JMX, including the jconsole and jvisualvm commands bundled with the Sun/Oracle Java platform. JMX is not configured by default. Use the dsconfig command to configure the JMX connection handler:

Interface stability: Evolving (See "ForgeRock Product Interface Stability" in the Reference)

$ dsconfig \
 create-connection-handler \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "JMX Connection Handler" \
 --type jmx \
 --set enabled:true \
 --set listen-port:1689 \
 --trustAll \
 --no-prompt
 

By default, no users have privileges to access the JMX connection. The following command adds JMX privileges for Directory Manager:

$ dsconfig \
 set-root-dn-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --add default-root-privilege-name:jmx-notify \
 --add default-root-privilege-name:jmx-read \
 --add default-root-privilege-name:jmx-write \
 --trustAll \
 --no-prompt
 

Also configure security to login remotely. See the section on Using SSL in Monitoring and Management Using JMX for hints.

Alternatively, connect to a local server process using the process ID:

$ jvisualvm --openpid $(</path/to/opendj/logs/server.pid)
 

14.5. Server Operation and Tasks

OpenDJ servers have commands for monitoring server processes and tasks. The status command, described in status(1) in the Reference, displays basic information about the local server, similar to what is seen in the default window of the control panel. The manage-tasks command, described in manage-tasks(1) in the Reference, lets you manage tasks scheduled on a server, such as nightly backup.

The status command takes administrative credentials to read the configuration, as does the control panel:

$ status \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --script-friendly \
 --trustAll
Server Run Status: Started
Open Connections: 1
Host Name: opendj.example.com
Administrative Users: cn=Directory Manager
Installation Path: /path/to/opendj
Version: OpenDJ Server 4.0.0
Java Version: <version>
Administration Connector: Port 4444 (LDAPS)
-
Address:Port: --
Protocol: LDIF
State: Disabled
-
Address:Port: 0.0.0.0:161
Protocol: SNMP
State: Disabled
-
Address:Port: 0.0.0.0:8080
Protocol: HTTP
State: Disabled
-
Address:Port: 0.0.0.0:1389
Protocol: LDAP
State: Enabled
-
Address:Port: 0.0.0.0:1636
Protocol: LDAPS
State: Enabled
-
Address:Port: 0.0.0.0:1689
Protocol: JMX
State: Enabled
-
Base DN:     dc=example,dc=com
Backend ID:  userRoot
Entries:     <count>
Replication:
 

The manage-tasks command connects to the administration port, and so can connect to both local and remote servers:

$ manage-tasks \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --trustAll \
 --no-prompt
 

14.6. Server Logs

By default, the server stores the following files under the logs/ directory:

  • Access logs for messages about clients accessing the server.

    One form of access log is a directory audit log. An audit log records changes to directory data in LDIF.

  • Debug logs for messages tracing internal server events.

  • Error logs for messages tracing server events.

  • Replication logs for messages used to help repair problems in data replication.

  • A server.out log for messages about server events since startup.

    Messages in this file have the same format as error log messages.

  • A server.pid process ID file when the server is running.

Logs are handled by log publishers. Log publishers determine which messages to publish, where to publish them, and what output format to use.

The server's logging system supports extensibility through the ForgeRock Common Audit event framework. (Common Audit deals with any event you can audit, not only the directory data changes recorded in a directory audit log.) The ForgeRock Common Audit event framework provides log handlers for publishing to local files or to remote systems, as described in "Common ForgeRock Access Logs".

You configure logging using the dsconfig command. In addition to configuring how messages are published, you can configure policies for log file rotation and retention.

14.6.1. Access Logs

An access log traces client requests that the server processes. Each message includes a datestamp, information about the connection, and information about the operation processed.

Tip

It is possible to configure multiple access logs at the same time. This makes it possible to have a primary unfiltered access logger to record information about all client requests, and also additional filtered access logs as described below in "Access Log Filtering".

Do not enable multiple unfiltered access loggers, however.

An unfiltered access logger can put significant write load on the disk subsystem where access logs are stored. Every client request results in at least one new log message.

By default, the JSON file-based access logger is enabled. For details about this log publisher, see "Configuring JSON Access Logs".

14.6.1.1. Common ForgeRock Access Logs

OpenDJ servers support the ForgeRock Common Audit event framework, and uses the JSON file handler as the default logger. The log message formats are compatible for all products using the framework. The framework uses transaction IDs to correlate requests as they traverse the platform. This makes it easier to monitor activity and to enrich reports.

Interface stability: Evolving

The ForgeRock Common Audit event framework is built on audit event handlers. Audit event handlers can encapsulate their own configurations. Audit event handlers are the same in each product in the ForgeRock platform. You can plug in custom handlers that comply with the framework without having to upgrade the server.

Note

The ForgeRock Common Audit event framework includes handlers for logging audit event messages to local files and facilities, as well as to remote systems.

Although the ForgeRock Common Audit event framework supports multiple topics, OpenDJ software currently supports handling only access events. OpenDJ software divides access events into ldap-access events and http-access events.

Common Audit transaction IDs are not recorded by default. In order to record transaction IDs in the access logs, you must configure the OpenDJ server to trust them as described in the sections below.

Common Audit LDAP events have the following format:

{
    "eventName": "DJ-LDAP",
    "client": {
        "ip": string,                         // Client IP address
        "port": number                        // Client port number
    },
    "server": {
        "ip": string,                         // Server IP address
        "port": number                        // Server port number
    },
    "request": {                              // LDAP request
        "attrs": [ string ],                  // Requested attributes
        "authType": string,                   // Bind type such as "SIMPLE"
        "connId": number,                     // Connection ID
        "controls": string,                   // Request controls
        "deleteOldRDN": boolean,              // For a modify DN request
        "dn": string,                         // Bind DN
        "filter": string,                     // Search filter
        "idToAbandon": number,                // ID to use to abandon operation
        "message": string,                    // Localized request message
        "msgId": number,                      // Message ID
        "name": string,                       // Operation name
        "newRDN": string,                     // For a modify DN request
        "newSup": string,                     // For a modify DN request
        "oid": string,                        // Operation name or OID
        "operation": string,                  // Examples: "CONNECT", "BIND", "SEARCH"
        "opType": "sync",                     // Replication operation
        "protocol": "LDAP",
        "runAs": string,                      // Authorization ID
        "scope": string,                      // Search scope such as "sub"
        "version": string                     // Version "2", "3"
    },
    "response": {
        "additionalItems": string             // Additional information
        "controls": string,                   // Response controls
        "elapsedTime": number,                // Number of time units
        "elapsedTimeUnits": string,           // Time unit such as "MILLISECONDS"
        "failureReason": string,              // Human-readable information
        "maskedMessage": string,              // Real, masked result message
        "maskedResult": string,               // Real, masked result code
        "nentries": number,                   // Number of entries returned
        "reason": string,                     // Reason for disconnect
        "status": string,                     // "SUCCESSFUL", "FAILED"
        "statusCode": string                  // For example, "0" for success
    },
    "timestamp": string,                      // UTC date
    "transactionId": string,                  // Unique ID for the transaction
    "userId": string,                         // User who requested the operation
    "_id": string                             // Unique ID for the operation
}
 

Common Audit HTTP events have the following format:

{
    "eventName": "DJ-HTTP",
    "client": {
        "ip": string,                         // Client IP address
        "port": number                        // Client port number
    },
    "server": {
        "ip": string,                         // Server IP address
        "port": number                        // Server port number
    },
    "http": {                                 // HTTP request and response
      "request": {
        "secure": boolean,                    // HTTP: false; HTTPS: true
        "method": string,                     // Examples: "GET", "POST", "PUT"
        "path": string,                       // URL
        "queryParameters": map,               // map: { key-string: [ value-string ] }
        "cookies": map                        // map: { key-string: [ value-string ] }
      },
      "response": {
        "headers": map                        // map: { key-string: [ value-string ] }
      }
    },
    "response": {
        "detail": string,                     // Human-readable information
        "elapsedTime": number,                // Number of time units
        "elapsedTimeUnits": string,           // Time unit such as "MILLISECONDS"
        "status": string,                     // "SUCCESSFUL", "FAILED"
        "statusCode": string                  // For example, "0" for success
    },
    "timestamp": string,                      // UTC date
    "transactionId": string,                  // Unique ID for the transaction
    "trackingIds": [ string ],                // Unique IDs from the transaction context
    "userId": string,                         // User who requested the operation
    "_id": string                             // Unique ID for the operation
}
 
14.6.1.1.1. Configuring JSON Access Logs

A JSON handler sends messages to a JSON format file.

This section includes the following procedures:

To Configure JSON LDAP Access Logs

The default JSON-based LDAP access log file is logs/ldap-access.audit.json. Follow these steps to change the configuration:

  1. Decide whether to trust transaction IDs sent by client applications, used to correlate requests as they traverse multiple servers.

    Client applications using the ForgeRock Common Audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications.

    Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header.

    By default, an OpenDJ server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0.

    To trust transactions, set the advanced global server property, trust-transaction-ids, to true:

    $ dsconfig \
     set-global-configuration-prop \
     --advanced \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set trust-transaction-ids:true \
     --trustAll \
     --no-prompt
     
  2. (Optional) Edit the default access log publisher if necessary.

    The following example applies the default settings:

    $ dsconfig \
     set-log-publisher-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Json File-Based Access Logger" \
     --set enabled:true \
     --add "rotation-policy:24 Hours Time Limit Rotation Policy" \
     --add "rotation-policy:Size Limit Rotation Policy" \
     --set "retention-policy:File Count Retention Policy" \
     --trustAll \
     --no-prompt
       
To Enable JSON HTTP Access Logs

When you enable the HTTP connection handler as described in "To Set Up REST Access to User Data" in the Administration Guide, also consider enabling JSON-based HTTP access logs.

The default JSON-based HTTP access log file is logs/http-access.audit.json:

  1. Decide whether to trust transaction IDs sent by client applications, used to correlate requests as they traverse multiple servers.

    Client applications using the ForgeRock Common Audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications.

    Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header.

    By default, an OpenDJ server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0.

    To trust transactions, set the advanced global server property, trust-transaction-ids, to true:

    $ dsconfig \
     set-global-configuration-prop \
     --advanced \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set trust-transaction-ids:true \
     --trustAll \
     --no-prompt
     
  2. Enable the log publisher:

    $ dsconfig \
     set-log-publisher-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Json File-Based HTTP Access Logger" \
     --set enabled:true \
     --trustAll \
     --no-prompt
       
14.6.1.1.2. Configuring CSV Access Logs

A CSV handler sends messages to a comma-separated variable (CSV) file.

This section includes the following procedures:

To Enable CSV LDAP Access Logs

The default CSV LDAP access log file is logs/ldap-access.csv:

  1. Decide whether to trust transaction IDs sent by client applications, used to correlate requests as they traverse multiple servers.

    Client applications using the ForgeRock Common Audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications.

    Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header.

    By default, an OpenDJ server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0.

    To trust transactions, set the advanced global server property, trust-transaction-ids, to true:

    $ dsconfig \
     set-global-configuration-prop \
     --advanced \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set trust-transaction-ids:true \
     --trustAll \
     --no-prompt
     
  2. Create an enabled CSV file access logger with optional rotation and retention policies as in the following example:

    $ dsconfig \
     create-log-publisher \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Common Audit Csv File Access Logger" \
     --type csv-file-access \
     --set enabled:true \
     --set "rotation-policy:24 Hours Time Limit Rotation Policy" \
     --set "rotation-policy:Size Limit Rotation Policy" \
     --set "retention-policy:File Count Retention Policy" \
     --trustAll \
     --no-prompt
       

    When setting the CSV file access log publisher properties, you can set the log directory, but you cannot change the log file name, which contains ldap-access.

  3. (Optional) If you require tamper-evident logs, prepare a keystore as described in "To Prepare a Keystore for Tamper-Evident Logs". Then enable tamper-evident capability as in the following example:

    $ dsconfig \
     set-log-publisher-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Common Audit Csv File Access Logger" \
     --set tamper-evident:true \
     --set key-store-file:config/audit-keystore \
     --set key-store-pin-file:config/audit-keystore.pin \
     --trustAll \
     --no-prompt
       

    Tamper-evident logging relies on digital signatures and regularly flushing messages to the log system. In high-volume directory deployments with heavy access patterns, signing log messages has a severe negative impact on server performance, reducing throughput by orders of magnitude.

    Be certain to test the performance impact of tamper-evident logging with realistic access patterns for your deployment before enabling the feature in production.

To Enable CSV HTTP Access Logs

If you have enabled the HTTP connection handler as described in "To Set Up REST Access to User Data" in the Administration Guide, you might want to enable CSV-format HTTP access logs.

The default CSV HTTP access log file is logs/http-access.csv:

  1. Decide whether to trust transaction IDs sent by client applications, used to correlate requests as they traverse multiple servers.

    Client applications using the ForgeRock Common Audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications.

    Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header.

    By default, an OpenDJ server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0.

    To trust transactions, set the advanced global server property, trust-transaction-ids, to true:

    $ dsconfig \
     set-global-configuration-prop \
     --advanced \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set trust-transaction-ids:true \
     --trustAll \
     --no-prompt
     
  2. Create an enabled CSV file HTTP access logger with optional rotation and retention policies as in the following example:

    $ dsconfig \
     create-log-publisher \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Common Audit Csv File HTTP Access Logger" \
     --type csv-file-http-access \
     --set enabled:true \
     --set "rotation-policy:24 Hours Time Limit Rotation Policy" \
     --set "rotation-policy:Size Limit Rotation Policy" \
     --set "retention-policy:File Count Retention Policy" \
     --trustAll \
     --no-prompt
       

    When setting the CSV file HTTP access log publisher properties, you can set the log directory, but you cannot change the log file name, which contains http-access.

  3. (Optional) If you require tamper-evident logs, prepare a keystore as described in "To Prepare a Keystore for Tamper-Evident Logs". Then enable tamper-evident capability as in the following example:

    $ dsconfig \
     set-log-publisher-prop \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Common Audit Csv File HTTP Access Logger" \
     --set tamper-evident:true \
     --set key-store-file:config/audit-keystore \
     --set key-store-pin-file:config/audit-keystore.pin \
     --trustAll \
     --no-prompt
       

    Tamper-evident logging relies on digital signatures and regularly flushing messages to the log system. In high-volume directory deployments with heavy access patterns, signing log messages has a severe negative impact on server performance, reducing throughput by orders of magnitude.

    Be certain to test the performance impact of tamper-evident logging with realistic access patterns for your deployment before enabling the feature in production.

14.6.1.1.3. Configuring Elasticsearch Access Logs

An Elasticsearch audit event handler sends messages to an Elasticsearch server.

Before you enable the Elasticsearch handler, create a mapping in the Elasticsearch server index for the messages. For a sample index definition, see /path/to/opendj/config/audit-handlers/elasticsearch-index-setup-example.json.

To enable the Elasticsearch handler, see "To Enable an Access Logger With an External Configuration". The JSON configuration file for the Elasticsearch handler has the following format:

{
  "class": "org.forgerock.audit.handlers.elasticsearch.ElasticsearchAuditEventHandler",
  "config": {
    "name": string,               // Handler name, such as "elasticsearch".
    "topics": [ string, ...],     // LDAP: "ldap-access"; HTTP: "http-access".
    "enabled": boolean,           // Is the handler enabled?
    "connection": {               // (Optional) Connect using default settings.
      "host": string,             // Elasticsearch host. Default: localhost.
      "port": number,             // Elasticsearch host. Default: 9200.
      "useSSL": boolean,          // Connect to Elasticsearch over HTTPS? Default: false.
      "username": string,         // (Optional) User name for HTTP Basic auth.
      "password": string          // (Optional) Password for HTTP Basic auth.
    },
    "indexMapping": {             // (Optional) No mapping specified.
      "indexName": string         // Name of the Elasticsearch index.
    },
    "buffering": {                // (Optional) Default: write each message separately, no buffering.
      "enabled": boolean,         // Buffer messages to be sent? Default: false.
      "maxSize": number,          // Maximum number of buffered events.
      "writeInterval": duration,  // Interval between sending batch of events.
      "maxBatchedEvents": number  // Number of events to send per interval.
    }
  }
}
 

For a sample configuration, see /path/to/opendj/config/audit-handlers/elasticsearch-config.json-example.

The writeInterval takes a duration.

A duration is a lapse of time expressed in English, such as 23 hours 59 minutes and 59 seconds.

Durations are not case sensitive.

Negative durations are not supported.

The following units can be used in durations:

  • indefinite, infinity, undefined, unlimited: unlimited duration

  • zero, disabled: zero-length duration

  • days, day, d: days

  • hours, hour, h: hours

  • minutes, minute, min, m: minutes

  • seconds, second, sec, s: seconds

  • milliseconds, millisecond, millisec, millis, milli, ms: milliseconds

  • microseconds, microsecond, microsec, micros, micro, us: microseconds

  • nanoseconds, nanosecond, nanosec, nanos, nano, ns: nanoseconds

Example: Elasticsearch For Access Log

This example demonstrates logging HTTP access messages to a local Elasticsearch server.

To prepare the example, complete these steps:

  1. Install and run an Elasticsearch server on localhost:9200.

  2. Create an audit index in the Elasticsearch server for HTTP audit event messages.

    The following command uses the example index configuration file:

    $ curl \
     --request POST \
     --header "Content-Type: application/json" \
     --data @/path/to/opendj/config/audit-handlers/elasticsearch-index-setup-example.json \
     http://localhost:9200/audit
    {"acknowledged":true}
       
  3. Configure OpenDJ servers to enable HTTP access as described in "To Set Up REST Access to User Data" in the Administration Guide.

  4. Add a JSON configuration file under for the handler:

    $ cat /path/to/opendj/config/audit-handlers/elasticsearch-handler.json
    {
      "class": "org.forgerock.audit.handlers.elasticsearch.ElasticsearchAuditEventHandler",
      "config": {
        "name": "elasticsearch",
        "topics": ["http-access"],
        "connection": {
          "useSSL": false,
          "host": "localhost",
          "port": 9200
        },
        "indexMapping": {
          "indexName": "audit"
        },
        "buffering": {
          "enabled": true,
          "maxSize": 10000,
          "writeInterval": "100 ms",
          "maxBatchedEvents": 500
        }
      }
    }
       
  5. Configure the server to use the Elasticsearch audit handler:

     $ dsconfig \
     create-log-publisher \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --publisher-name "Elasticsearch HTTP Access Log Publisher" \
     --type external-http-access \
     --set enabled:true \
     --set config-file:config/audit-handlers/elasticsearch-handler.json \
     --trustAll \
     --no-prompt
    
       

With Elasticsearch and the OpenDJ server running, audit event messages for HTTP requests to the OpenDJ server are sent to Elasticsearch.

The following example requests Babs Jensen's entry:

$ curl --user bjensen:hifalutin http://opendj.example.com:8080/api/users/bjensen
  

A search request to Elasticsearch shows the resulting audit event content:

$ curl 'localhost:9200/audit/_search?q=*&pretty'
 

See the Elasticsearch documentation for details on searching and search results.


14.6.1.1.4. Configuring JDBC Access Logs

A JDBC handler sends messages to an appropriately configured relational database table.

Before you enable the JDBC handler, create the necessary schema and tables in the target database. See the examples, /path/to/opendj/config/audit-handlers/mysql_tables-example.sql, and /path/to/opendj/config/audit-handlers/oracle_tables-example.sql.

In addition, the JDBC handler depends on the JDBC driver for the database, and HirakiCP. Copy the JDBC driver .jar file for your database, the HirakiCP .jar file for your Java version, and any other dependent libraries required to the /path/to/opendj/extlib/ directory.

To enable the JDBC handler, see "To Enable an Access Logger With an External Configuration". The JSON configuration file for the JDBC handler has the following format:

{
    "class": "org.forgerock.audit.handlers.jdbc.JdbcAuditEventHandler",
    "config": {
        "name": string,                    // Handler name, such as "jdbc".
        "topics": array,                   // LDAP: "ldap-access"; HTTP: "http-access".
        "databaseType": string,            // Supported by default: "oracle", "mysql", "h2".
        "enabled": boolean,                // Is the handler enabled?
        "buffering": {                     // (Optional) Default: write each message separately, no buffering.
            "enabled": boolean,            // Buffer messages to be sent? Default: false.
            "writeInterval": duration,     // Duration; must be > 0 if buffering is enabled.
            "autoFlush": boolean,          // Flush messages automatically? Default: true.
            "maxBatchedEvents": number,    // Maximum messages in prepared statement. Default: 100.
            "maxSize": number,             // Maximum number of buffered messages. Default: 5000.
            "writerThreads": number        // Threads to write buffered messages: Default: 1.
        },
        "connectionPool": {
            "dataSourceClassName": string, // Either set this to the class name of the data source...
            "jdbcUrl": string,             // ...or set this to the JDBC URL to connect to the database.
            "username": string,            // Username to connect to the database.
            "password": string,            // Password to connect to the database.
            "autoCommit": boolean,         // (Optional) Commit transactions automatically? Default: true.
            "connectionTimeout": number,   // (Optional) Milliseconds to wait before timing out. Default: 30,000.
            "idleTimeout": number,         // (Optional) Milliseconds to wait before timing out. Default: 600,000.
            "maxLifetime": number,         // (Optional) Milliseconds thread remains in pool. Default: 1,800,000.
            "minIdle": number,             // (Optional) Minimum connections in pool. Default: 10.
            "maxPoolSize": number,         // (Optional) Maximum number of connections in pool. Default: 10.
            "poolName": string,            // (Optional) Name of connection pool. Default: audit.
            "driverClassName": string      // (Optional) Class name of database driver. Default: null.
        },
        "tableMappings": [                 // Correspondence of message fields to database columns.
            {
                "event": string,           // LDAP: "ldap-access"; HTTP: "http-access".
                "table": string,           // LDAP: "ldapaccess"; HTTP: "httpaccess".
                "fieldToColumn": {         // Map of field names to database column names.
                    "event-field": "database-column" // Event-field takes JSON pointer.
                }
            }
        ]
    }
}
 

For a sample configuration, see /path/to/opendj/config/audit-handlers/jdbc-config.json-example.

The writeInterval takes a duration.

A duration is a lapse of time expressed in English, such as 23 hours 59 minutes and 59 seconds.

Durations are not case sensitive.

Negative durations are not supported.

The following units can be used in durations:

  • indefinite, infinity, undefined, unlimited: unlimited duration

  • zero, disabled: zero-length duration

  • days, day, d: days

  • hours, hour, h: hours

  • minutes, minute, min, m: minutes

  • seconds, second, sec, s: seconds

  • milliseconds, millisecond, millisec, millis, milli, ms: milliseconds

  • microseconds, microsecond, microsec, micros, micro, us: microseconds

  • nanoseconds, nanosecond, nanosec, nanos, nano, ns: nanoseconds

14.6.1.1.5. Configuring JMS Access Logs

A JMS handler is a JMS producer that publishes messages to an appropriately configured Java Message Service.

To enable the JMS handler, see "To Enable an Access Logger With an External Configuration". The JSON configuration file for the JMS handler has the following format:

{
    "class": "org.forgerock.audit.handlers.jms.JmsAuditEventHandler",
    "config": {
        "name": string,                    // Handler name, such as "jms".
        "enabled": boolean,                // Is the handler enabled?
        "topics": array,                   // LDAP: "ldap-access"; HTTP: "http-access".
        "deliveryMode": string,            // One of "NON_PERSISTENT", "PERSISTENT".
        "sessionMode": string,             // One of "AUTO", "CLIENT", "DUPS_OK".
        "batch": {                         // (Optional) Default: no batching.
            "batchEnabled": boolean,       // Batch messages to publish? Default: false.
            "capacity": number,            // Maximum capacity of publishing queue. Default: 1.
            "maxBatchedEvents": number,    // Maximum events to deliver in single publishing call. Default: 1.
            "threadCount": number,         // Worker threads to process publishing queue. Default: 1.
            "insertTimeoutSec": number,    // Seconds queue can block before adding new item. Default: 60.
            "pollTimeoutSec": number,      // Seconds worker threads wait for new item. Default: 10.
            "shutdownTimeoutSec": number   // Seconds publisher waits for threads at shutdown. Default: 60.
        },
        "jndi": {                          // (Optional) Default: Use default settings.
            "connectionFactoryName": string, // JNDI name for JMS connection factory. Default: "ConnectionFactory".
            "topicName": string            // (Optional) Match the value in the context. Default: "audit".
            "contextProperties": {         // JNDI InitialContext properties.
                // These depend on the JNDI provider. See the provider documentation for details.
            }
        }
    }
}
 

For a sample configuration, see /path/to/opendj/config/audit-handlers/jms-config.json-example.

14.6.1.1.6. Configuring Splunk Access Logs

A Splunk handler sends messages to an appropriately configured Splunk service.

To enable the Splunk handler, see "To Enable an Access Logger With an External Configuration". The JSON configuration file for the Splunk handler has the following format:

{
    "class": "org.forgerock.audit.handlers.splunk.SplunkAuditEventHandler",
    "config": {
        "name": string,                    // Handler name, such as "splunk".
        "enabled": boolean,                // Is the handler enabled?
        "topics": array,                   // LDAP: "ldap-access"; HTTP: "http-access".
        "authzToken": string,              // Splunk authorization token for HTTP requests.
        "buffering": {                     // Required message buffering configuration.
            "maxBatchedEvents": number,    // Maximum messages in prepared statement.
            "maxSize": number,             // Maximum number of buffered messages.
            "writeInterval": duration      // Duration as described below.
        },
        "connection": {                    // (Optional) Default: Use default settings.
            "host": string,                // Splunk host name. Default: "localhost".
            "port": number,                // Splunk port number. Default: "8088".
            "useSSL": boolean              // Use secure connection to Splunk? Default: false.
        }
    }
}
 

For a sample configuration, see /path/to/opendj/config/audit-handlers/splunk-config.json-example.

The writeInterval takes a duration.

A duration is a lapse of time expressed in English, such as 23 hours 59 minutes and 59 seconds.

Durations are not case sensitive.

Negative durations are not supported.

The following units can be used in durations:

  • indefinite, infinity, undefined, unlimited: unlimited duration

  • zero, disabled: zero-length duration

  • days, day, d: days

  • hours, hour, h: hours

  • minutes, minute, min, m: minutes

  • seconds, second, sec, s: seconds

  • milliseconds, millisecond, millisec, millis, milli, ms: milliseconds

  • microseconds, microsecond, microsec, micros, micro, us: microseconds

  • nanoseconds, nanosecond, nanosec, nanos, nano, ns: nanoseconds

14.6.1.1.7. Configuring Access Logging to Syslog

A Syslog handler sends messages to the UNIX system log as governed by RFC 5424, The Syslog Protocol.

Note

The implementation currently only supports writing access messages to Syslog, rather than error messages. As a result, this feature is of limited use in most deployments.

To enable a Syslog handler, see "To Enable an Access Logger With an External Configuration". The JSON configuration file for the Syslog handler has the following format:

{
    "class": "org.forgerock.audit.handlers.syslog.SyslogAuditEventHandler",
    "config": {
        "name": string,            // Handler name, such as "syslog".
        "enabled": boolean,        // Default: false.
        "topics": array,           // LDAP: "ldap-access"; HTTP: "http-access".
        "protocol": string,        // "TCP" or "UDP".
        "host": string,            // Syslog daemon host, such as localhost; must resolve to IP address.
        "port": number,            // Syslog daemon port number, such as 514; range: 0 to 65535.
        "connectTimeout": number,  // If using TCP, milliseconds to wait before timing out.
        "facility": string,        // Syslog facility to use for event messages.
        "buffering": {             // (Optional) Default: write each message separately, no buffering.
            "enabled": boolean,    // Buffer messages to be sent? Default: false.
            "maxSize": number      // Maximum number of buffered messages. Default: 5000.
        }
    }
}
 

For a sample configuration, see /path/to/opendj/config/audit-handlers/syslog-config.json-example.

For additional details, see "Syslog Facility Values".

Syslog Facility Values
ValueDescription

kern

Kernel messages.

user

User-level messages.

mail

Mail system.

daemon

System daemons.

auth

Security/authorization messages.

syslog

Messages generated internally by syslogd.

lpr

Line printer subsystem.

news

Network news subsystem.

uucp

UUCP subsystem.

cron

Clock daemon.

authpriv

Security/authorization messages.

ftp

FTP daemon.

ntp

NTP subsystem.

logaudit

Log audit.

logalert

Log alert.

clockd

Clock daemon.

local0

Local use 0.

local1

Local use 1.

local2

Local use 2.

local3

Local use 3.

local4

Local use 4.

local5

Local use 5.

local6

Local use 6.

local7

Local use 7.


14.6.1.1.8. Configuring Tamper-Evidence and External Handlers
To Prepare a Keystore for Tamper-Evident Logs

Tamper-evident logging depends on a public key/private key pair and on a secret key that are stored together in a JCEKS keystore. Follow these steps to prepare the keystore:

  1. Create a password for the keystore.

    The following example uses the default file name. If you use a different filename, then you must edit key-store-pin-file property when configuring the log publisher:

    $ touch /path/to/opendj/config/audit-keystore.pin
    $ chmod 600 /path/to/opendj/config/audit-keystore.pin
    # Add password in cleartext on the only line in the file:
    $ vi /path/to/opendj/config/audit-keystore.pin
      
  2. Generate a key pair in the keystore.

    The CSV event handler expects a JCEKS-type keystore with a key alias of Signature for the signing key, where the key is generated with the RSA key algorithm and the SHA256withRSA signature algorithm.

    The following example uses the default file name. If you use a different filename, then you must edit key-store-file property when configuring the log publisher:

    $ keytool \
     -genkeypair \
     -keyalg RSA \
     -sigalg SHA256withRSA \
     -alias "Signature" \
     -dname "CN=opendj.example.com,O=Example Corp,C=FR" \
     -keystore /path/to/opendj/config/audit-keystore \
     -storetype JCEKS \
     -storepass:file /path/to/opendj/config/audit-keystore.pin \
     -keypass:file /path/to/opendj/config/audit-keystore.pin
      
  3. Generate a secret key in the keystore.

    The CSV event handler expects a JCEKS-type keystore with a key alias of Password for the symmetric key, where the key is generated with the HmacSHA256 key algorithm and 256-bit key size.

    The following example uses the default file name. If you use a different filename, then you must edit key-store-file property when configuring the log publisher:

    $ keytool \
     -genseckey \
     -keyalg HmacSHA256 \
     -keysize 256 \
     -alias "Password" \
     -keystore /path/to/opendj/config/audit-keystore \
     -storetype JCEKS \
     -storepass:file /path/to/opendj/config/audit-keystore.pin \
     -keypass:file /path/to/opendj/config/audit-keystore.pin
      
  4. Verify that the keystore contains signature and password keys:

    $ keytool \
     -list \
     -keystore /path/to/opendj/config/audit-keystore \
     -storetype JCEKS \
     -storepass:file /path/to/opendj/config/audit-keystore.pin
    ...
    signature, <date>, PrivateKeyEntry,
    <fingerprint>
    password, <date>, SecretKeyEntry,
    <fingerprint>
      
To Enable an Access Logger With an External Configuration

An access logger configuration that relies on a JSON configuration lets you use any Common Audit event handler, including customer handlers. The content of the configuration file depends on the audit event handler.

Follow these steps:

  1. Decide whether to trust transaction IDs sent by client applications, used to correlate requests as they traverse multiple servers.

    Client applications using the ForgeRock Common Audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications.

    Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header.

    By default, an OpenDJ server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0.

    To trust transactions, set the advanced global server property, trust-transaction-ids, to true:

    $ dsconfig \
     set-global-configuration-prop \
     --advanced \
     --hostname opendj.example.com \
     --port 4444 \
     --bindDN "cn=Directory Manager" \
     --bindPassword password \
     --set trust-transaction-ids:true \
     --trustAll \
     --no-prompt
     
  2. Create the external JSON configuration file for the handler.

    Base your work on the appropriate template in the config/audit-handlers directory.

  3. (Optional) If this is a custom access logger provided separately, copy the custom handler .jar file to /path/to/opendj/lib/extensions.

  4. Create a log publisher configuration for the access log, where the type defines whether the log contains messages about LDAP or HTTP requests:

    • For LDAP access logging, create an external access log publisher:

      $ dsconfig \
       create-log-publisher \
       --hostname opendj.example.com \
       --port 4444 \
       --bindDN "cn=Directory Manager" \
       --bindPassword password \
       --publisher-name "My External LDAP Access Log Publisher" \
       --type external-access \
       --set enabled:true \
       --set config-file:config/audit-handlers/handler-conf.json \
       --trustAll \
       --no-prompt
          
    • For HTTP access logging, create an external HTTP access log publisher:

      $ dsconfig \
       create-log-publisher \
       --hostname opendj.example.com \
       --port 4444 \
       --bindDN "cn=Directory Manager" \
       --bindPassword password \
       --publisher-name "My External HTTP Access Log Publisher" \
       --type external-http-access \
       --set enabled:true \
       --set config-file:config/audit-handlers/handler-conf.json \
       --trustAll \
       --no-prompt
          

14.6.1.2. Native LDAP Access Logs

For LDAP connection handlers, you can configure a native format access log.

Tip

This format was previously the default for OpenDJ servers. This log format can be useful, for example, if you already have software configured to consume the messages.

This access log uses the File Based Access Log Publisher The default log file is logs/access.

The following command enables this LDAP access logger:

$ dsconfig \
 set-log-publisher-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "File-Based Access Logger" \
 --set enabled:true \
 --trustAll \
 --no-prompt
 

By default, this access log contains a message for each request, and a message for each response, as well as messages for connection and disconnection. You can configure the access log to write messages only on responses by setting the property log-format:combined. The setting is useful when filtering messages based on response criteria. It causes the server to log one message per operation, rather than one message for the request and another for the response.

14.6.1.3. Standard HTTP Access Logs

For HTTP requests, you can configure an access logger that uses the Extended Log File Format, which is a W3C working draft.

This access log uses the File Based HTTP Access Log Publisher. The default log file is logs/http-access.

The following command enables this HTTP access logger:

$ dsconfig \
 set-log-publisher-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "File-Based HTTP Access Logger" \
 --set enabled:true \
 --trustAll \
 --no-prompt
 

The following default fields are shown here in the order they occur in the log file:

cs-host

Client host name

c-ip

Client IP address

cs-username

Username used to authenticate

x-datetime

Completion timestamp for the HTTP request, which you can configure using the log-record-time-format property

cs-method

HTTP method requested by the client

cs-uri

URI requested by the client

cs-uri-stem

URL-encoded path requested by the client

cs-uri-query

URL-encoded query parameter string requested by the client

cs-version

HTTP version requested by the client

sc-status

HTTP status code for the operation

cs(User-Agent)

User-Agent identifier

x-connection-id

Connection ID used for OpenDJ internal operations

When using this field to match HTTP requests with internal operations in the LDAP access log, first set the access log advanced property, suppress-internal-operations, to false. By default, internal operations do not appear in the LDAP access log.

x-etime

Execution time in milliseconds needed by OpenDJ to service the HTTP request

x-transaction-id

ForgeRock Common Audit event framework transaction ID for the request

This defaults to 0 unless you configure the server to trust transaction IDs.

Missing values are replaced with -. Tabs separate the fields, and if a field contains a tab character, then the field is surrounded with double quotes. OpenDJ then doubles double quotes in the field to escape them.

The following example shows an excerpt of an HTTP access log with space reformatted:

- <client-ip> bjensen  <datestamp> GET  /users/bjensen HTTP/1.1 200 <user-agent> 3  40
- <client-ip> bjensen  <datestamp> GET  /users/scarter HTTP/1.1 200 <user-agent> 4   9
- <client-ip> -        <datestamp> GET  /users/missing HTTP/1.1 401 <user-agent> 5   0
- <client-ip> kvaughan <datestamp> POST /users         HTTP/1.1 200 <user-agent> 6 120
 

You can configure the log-format for the access log using the dsconfig command.

In addition to the default fields, the following standard fields are supported:

c-port

Client port number

s-computername

Server name where the access log was written

s-ip

Server IP address

s-port

Server port number

14.6.1.4. Access Log Filtering

With the default access log configuration (no filtering), for every client application request, the server writes at least one message to its access log. This volume of logging gives you the information to analyze overall access patterns, or to audit access when you do not know in advance what you are looking for.

When you do know what you are looking for, log filtering lets you throttle logging to focus on what you want to see. You specify the criteria for a filtering policy, and apply the policy to a log publisher.

Log filtering policies use the following criteria:

  • Client IP address, bind DN, group membership

  • Operation type (abandon, add, bind, compare, connect, delete, disconnect, extended operation, modify, rename, search, and unbind)

  • Port number

  • Protocol used

  • Response time

  • Result codes (only log error results, for example)

  • Search response criteria (number of entries returned, unindexed search, and others)

  • Target DN

  • User DN and group membership

A log publisher's filtering policy determines whether to include or exclude log messages that match the criteria.

Example: Exclude Administration-Related Messages

A common development troubleshooting technique consists of sending client requests while tailing the access log:

$ tail -f /path/to/opendj/logs/ldap-access.audit.json
  

When the control panel is running, or when the dsconfig command accesses the configuration, access log messages are written for administrative operations. These messages can prevent you from seeing the messages of interest from client applications.

This example demonstrates how to filter access log messages for administrative connections over LDAPS on port 4444.

Configure access log filtering criteria:

$ dsconfig \
 create-access-log-filtering-criteria \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "Json File-Based Access Logger" \
 --criteria-name "Exclude LDAPS on 4444" \
 --type generic \
 --set connection-port-equal-to:4444 \
 --set connection-protocol-equal-to:ldaps \
 --trustAll \
 --no-prompt
  

Activate filtering to exclude administrative messages:

$ dsconfig \
 set-log-publisher-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "Json File-Based Access Logger" \
 --set filtering-policy:exclusive \
 --trustAll \
 --no-prompt
  

The publisher filters messages about administrative requests to port 4444.


Example: Audit Configuration Changes

This example demonstrates how to set up an audit log file to track changes to the server configuration. The LDAP representation of the configuration is found under the base DN cn=config.

As described in "Server Logs" in the Administration Guide, an audit log is a type of access log that records changes to directory data in LDIF. The change records have timestamped comments with connection and operation IDs, so that you can correlate the changes with messages in access logs.

Create an audit log publisher:

$ dsconfig \
 create-log-publisher \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "File-Based Server Configuration Audit Log" \
 --type file-based-audit \
 --set enabled:true \
 --set filtering-policy:inclusive \
 --set log-file:logs/config-audit \
 --set rotation-policy:"24 Hours Time Limit Rotation Policy" \
 --set rotation-policy:"Size Limit Rotation Policy" \
 --set retention-policy:"File Count Retention Policy" \
 --trustAll \
 --no-prompt
  

Create log filtering criteria for the logger that matches operations targeting cn=config:

$ dsconfig \
 create-log-publisher \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "File-Based Server Configuration Audit Log" \
 --type file-based-audit \
 --set enabled:true \
 --set filtering-policy:inclusive \
 --set log-file:logs/config-audit \
 --set rotation-policy:"24 Hours Time Limit Rotation Policy" \
 --set rotation-policy:"Size Limit Rotation Policy" \
 --set retention-policy:"File Count Retention Policy" \
 --trustAll \
 --no-prompt
  

The server now writes to the current audit log file, /path/to/opendj/logs/config-audit, whenever an administrator changes the server configuration. The following example output show the resulting LDIF that defines the log filtering criteria:

# <datestamp>; conn=<id>; op=<id>
dn: cn=Record changes to cn=config,cn=Filtering Criteria,cn=File-Based Server Configuration Audit Log,cn=Loggers,cn=config
changetype: add
objectClass: top
objectClass: ds-cfg-access-log-filtering-criteria
cn: Record changes to cn=config
ds-cfg-request-target-dn-equal-to: **,cn=config
ds-cfg-request-target-dn-equal-to: cn=config
createTimestamp: <timestamp>
creatorsName: cn=Directory Manager,cn=Root DNs,cn=config
entryUUID: <uuid>

14.6.2. Debug Logs

A debug log traces internal server information needed to troubleshoot a problem. Debug logs can grow large quickly, and therefore no debug logs are enabled by default.

For debug logging, you must set a debug target to control what gets logged. For details, see "Enabling Debug Logging" in the Administration Guide.

14.6.3. Error Logs

The errors log traces server events, error conditions, and warnings, categorized and identified by severity.

Messages in the logs/errors file have the following format:

[datestamp] category=category severity=severity msgID=ID number msg=message string
 

For lists of severe and fatal error messages by category, see the Log Message Reference.

14.6.4. Replication Repair Logs

The replication repair log traces replication events, with entries having the same format as the errors log:

[datestamp] category=SYNC severity=severity msgID=ID number msg=message string
 

The replication log does not trace replication operations. Use the external change log instead to get notifications about changes to directory data over protocol, as described in "Change Notification For Your Applications" in the Administration Guide.

14.6.5. Log Rotation and Retention

Each file-based log can be associated with a log rotation policy, and a log retention policy. The rotation policy specifies when to rotate a log file based on a time, log file age, or log file size. The retention policy specifies whether to retain logs based on the number of logs, their size, or how much free space should be left on the disk.

Rotated logs have a rotation timestamp appended to their name.

You list existing log rotation policies with the dsconfig list-log-rotation-policies command, and retention policies with the dsconfig list-log-retention-policies:

$ dsconfig \
 list-log-rotation-policies \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --trustAll \
 --no-prompt
Log Rotation Policy                 : Type       : file-size-limit : rotation-interval : time-of-day
------------------------------------:------------:-----------------:-------------------:------------
24 Hours Time Limit Rotation Policy : time-limit : -               : 1 d               : -
7 Days Time Limit Rotation Policy   : time-limit : -               : 1 w               : -
Fixed Time Rotation Policy          : fixed-time : -               : -                 : 2359
Size Limit Rotation Policy          : size-limit : 100 mb          : -                 : -
$ dsconfig \
 list-log-retention-policies \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --trustAll \
 --no-prompt
Log Retention Policy             : Type            : disk-space-used : free-disk-space : number-of-files
---------------------------------:-----------------:-----------------:-----------------:----------------
File Count Retention Policy      : file-count      : -               : -               : 10
Free Disk Space Retention Policy : free-disk-space : -               : 500 mb          : -
Size Limit Retention Policy      : size-limit      : 500 mb          : -               : -
 

View the policies that apply for a given log with the dsconfig get-log-publisher-prop command. The following example shows that the server keeps 10 access log files, rotating either each day or when the log size reaches 100 MB:

$ dsconfig \
 get-log-publisher-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --publisher-name "Json File-Based Access Logger" \
 --property retention-policy \
 --property rotation-policy \
 --trustAll \
 --no-prompt
Property         : Value(s)
-----------------:-------------------------------------------------------------
retention-policy : File Count Retention Policy
rotation-policy  : 24 Hours Time Limit Rotation Policy, Size Limit Rotation
                 : Policy
 

Use the dsconfig command to create, update, delete, and assign log rotation and retention policies. Set the policy that applies to a logger with the dsconfig set-log-publisher-prop command.

Note

When using access logs based on the ForgeRock Common Audit event framework, such as the CSV file based or JSON file based access log publishers, you can only configure one of each type of retention or rotation policy.

In other words, you can configure one file count, free disk space, and size limit log retention policy, but not more than one of each. Also, you can configure one fixed time, size limit, and time limit log rotation policy, but not more than one of each.

14.7. Alert Notifications

OpenDJ servers can send notifications of significant server events. Alert notifications are not enabled by default.

The following example enables JMX alert notifications:

$ dsconfig \
 set-alert-handler-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "JMX Alert Handler" \
 --set enabled:true \
 --trustAll \
 --no-prompt
 

OpenDJ servers can send mail over SMTP instead of JMX notifications. Before you set up the SMTP-based alert handler, specify an SMTP server:

$ dsconfig \
 set-global-configuration-prop \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --set smtp-server:opendj.example.com \
 --trustAll \
 --no-prompt
$ dsconfig \
 create-alert-handler \
 --hostname opendj.example.com \
 --port 4444 \
 --bindDN "cn=Directory Manager" \
 --bindPassword password \
 --handler-name "SMTP Alert Handler" \
 --type smtp \
 --set enabled:true \
 --set message-subject:"OpenDJ Alert, Type: %%alert-type%%, ID: %%alert-id%%" \
 --set message-body:"%%alert-message%%" \
 --set recipient-address:kvaughan@example.com \
 --set sender-address:opendj@example.com \
 --trustAll \
 --no-prompt
 
Alert Types

OpenDJ servers use the following alert types. For alert types that indicate server problems, check logs/errors for details:

org.opends.server.AccessControlDisabled

The access control handler has been disabled.

org.opends.server.AccessControlEnabled

The access control handler has been enabled.

org.opends.server.authentiation.dseecompat.ACIParseFailed

The dseecompat access control subsystem failed to correctly parse one or more ACI rules when the server first started.

org.opends.server.BackendRunRecovery

The pluggable backend has thrown a RunRecoveryException. The server needs to be restarted.

org.opends.server.CannotCopySchemaFiles

A problem has occurred while attempting to create copies of the existing schema configuration files before making a schema update, and the schema configuration has been left in a potentially inconsistent state.

org.opends.server.CannotRenameCurrentTaskFile

The server is unable to rename the current tasks backing file in the process of trying to write an updated version.

org.opends.server.CannotRenameNewTaskFile

The server is unable to rename the new tasks backing file into place.

org.opends.server.CannotScheduleRecurringIteration

The server is unable to schedule an iteration of a recurring task.

org.opends.server.CannotWriteConfig

The server is unable to write its updated configuration for some reason and therefore the server may not exhibit the new configuration if it is restarted.

org.opends.server.CannotWriteNewSchemaFiles

A problem has occurred while attempting to write new versions of the server schema configuration files, and the schema configuration has been left in a potentially inconsistent state.

org.opends.server.CannotWriteTaskFile

The server is unable to write an updated tasks backing file for some reason.

org.opends.server.DirectoryServerShutdown

The server has begun the process of shutting down.

org.opends.server.DirectoryServerStarted

The server has completed its startup process.

org.opends.server.DiskFull

Free disk space has reached the full threshold.

Default is 20 MB.

org.opends.server.DiskSpaceLow

Free disk space has reached the low threshold.

Default is 100 MB.

org.opends.server.EnteringLockdownMode

The server is entering lockdown mode, wherein only root users are allowed to perform operations and only over the loopback address.

org.opends.server.LDAPHandlerDisabledByConsecutiveFailures

Consecutive failures have occurred in the LDAP connection handler and have caused it to become disabled.

org.opends.server.LDAPHandlerUncaughtError

Uncaught errors in the LDAP connection handler have caused it to become disabled.

org.opends.server.LDIFBackendCannotWriteUpdate

An LDIF backend was unable to store an updated copy of the LDIF file after processing a write operation.

org.opends.server.LDIFConnectionHandlerIOError

The LDIF connection handler encountered an I/O error that prevented it from completing its processing.

org.opends.server.LDIFConnectionHandlerParseError

The LDIF connection handler encountered an unrecoverable error while attempting to parse an LDIF file.

org.opends.server.LeavingLockdownMode

The server is leaving lockdown mode.

org.opends.server.ManualConfigEditHandled

The server detects that its configuration has been manually edited with the server online and those changes were overwritten by another change made through the server. The manually edited configuration will be copied to another location.

org.opends.server.ManualConfigEditLost

The server detects that its configuration has been manually edited with the server online and those changes were overwritten by another change made through the server. The manually edited configuration could not be preserved due to an unexpected error.

org.opends.server.replication.UnresolvedConflict

Multimaster replication cannot resolve a conflict automatically.

org.opends.server.UncaughtException

A server thread has encountered an uncaught exception that caused that thread to terminate abnormally. The impact that this problem has on the server depends on which thread was impacted and the nature of the exception.

org.opends.server.UniqueAttributeSynchronizationConflict

A unique attribute conflict has been detected during synchronization processing.

org.opends.server.UniqueAttributeSynchronizationError

An error occurred while attempting to perform unique attribute conflict detection during synchronization processing.

Chapter 15. Testing Secure Deployments

This chapter covers a general approach to testing to make sure that the directory services you deploy work as planned. In this chapter you will learn how to:

  • Validate that security requirements corresponds to what users require

  • Prepare and test the directory service in a lab environment

  • Validate and verify the directory service in a pre-production environment

  • Monitor the deployed directory service for continuous verification

In this context, validation means checking that you are building the right thing, whereas verification means checking that you are building it in the right way.

15.1. Validating Requirements

Before you begin to write specific tests, step back to review the big picture. Do the security requirements make sense for the directory service, and also for the users of the service?

On the directory service side, you aim to prevent problems such as those described in "Threats to Directory Services". The directory service is only accessible in secure ways, requires strong credentials when authenticating, and grants access to data on a need-to-know basis.

On the users' side, you want directory access from any device or application using standard protocols and tools. The directory should protect your sensitive information, but not to the extent that it requires you to explicitly trust unfamiliar public key certificates, and to struggle to come up with yet another strong password that you must remember forever or be locked out of your account for good.

In refining the security requirements for the directory service, make sure there is an appropriate balance between security and user needs. An ultimately secure directory service is one that denies all user access. An ultimately flexible directory service is one that relinquishes all control. The appropriate balance is somewhere in the middle.

Be aware that directory service security is only part of an overall strategy, one that aims to help users and application developers make appropriately secure choices. In validating the requirements, understand how the directory service fits into the overall identity and access management strategy.

15.2. Preparing Functional Capabilities

Long before you roll out the directory service, when you start to prepare server configurations in a lab environment, begin by testing the directory's functional capabilities. As you understand your users' requirements, reproduce what their client applications will do in your tests. In most cases, it is not feasible to exhaustively reproduce everything that every directory client will do. Instead, choose a representative sample of actions. Test your expectations, both for normal and for insecure client application and user behavior.

The goals for your functional testing are to verify compliance, to uncover problems, and to begin automating tests early in the project. Test automation should drive you to use version control software, and continuous integration software as well. Be ready to roll back any change you make if a test fails, and make sure that every change is reviewed and tested before it is pushed further along in the process.

Aim to keep the automated tests both representative and short. As you build out the deployment and complexity grows, automated tests let you build the service with confidence, by repeatedly iterating with small changes to fix problems, and to better match users' expectations.

15.3. Preparing For Production

Before you apply a change to a production environment, you want to verify the impact under conditions as close as possible to those of the production environment.

In the test environment, the directory service should mirror production in terms of configuration, client application configuration and load, and directory data including access policies. This is the environment where end-to-end testing first takes place.

Although you might not test at a scale that is identical to production, the test environment must remain representative. For example, when using replicas in production, also use replicas in the pre-production test environment. When using secure connections everywhere in production, also use them in the test environment. If you expect many client applications accessing the production directory, and particular client usage patterns, also simulate those in the test environment.

Automate your testing in the pre-production environment as well. Each change for the production environment should first pass the pre-production tests. You will need to iterate through the tests for each change.

In deployments where updates to new servers would not harm production data, you might also use canary servers. Canary servers fulfill a similar function to canaries in coal mines. You deploy a small group of servers in production that have the change. You then test and monitor these servers to compare with unchanged servers. If the change looks good after enough testing and monitoring, you roll out more servers with the change. If something goes wrong, you have only exposed a small, perhaps less risky proportion of production clients to the change. Only use this when you are sure that replication from a canary server would not corrupt any production data.

15.4. Monitoring For Continuous Verification

Directory services integrate with many monitoring solutions as described in "Monitoring Directory Security". You can choose to access monitoring information over HTTP, LDAP, SNMP, and JMX, and by sending Common Audit events to local log files and remote systems for further processing.

In addition to using the monitoring capabilities in the software, adapt some of your tests to verify operation of the service in production. For example, a few end-to-end tests in production can alert you to problems early before they impact many users.

Glossary

Abandon operation

LDAP operation to stop processing of a request in progress, after which the server drops the connection without a reply to the client application.

Access control

Control to grant or to deny access to a resource.

Access control instruction (ACI)

Instruction added as a directory entry attribute for fine-grained control over what a given user or group member is authorized to do in terms of LDAP operations and access to user data.

ACIs are implemented independently from privileges, which apply to administrative operations.

See also Privilege.

Access control list (ACL)

An access control list connects a user or group of users to one or more security entitlements. For example, users in group sales are granted the entitlement read-only to some financial data.

access log

Server log tracing the operations the server processes including timestamps, connection information, and information about the operation itself.

Account lockout

The act of making an account temporarily or permanently inactive after successive authentication failures.

Active user

A user that has the ability to authenticate and use the services, having valid credentials.

Add operation

LDAP operation to add a new entry or entries to the directory.

Anonymous

A user that does not need to authenticate, and is unknown to the system.

Anonymous bind

A bind operation using simple authentication with an empty DN and an empty password, allowing anonymous access such as reading public information.

Approximate index

Index is used to match values that "sound like" those provided in the filter.

Attribute

Properties of a directory entry, stored as one or more key-value pairs. Typical examples include the common name (cn) to store the user's full name and variations of the name, user ID (uid) to store a unique identifier for the entry, and mail to store email addresses.

audit log

Type of access log that dumps changes in LDIF.

Authentication

The process of verifying who is requesting access to a resource; the act of confirming the identity of a principal.

Authorization

The process of determining whether access should be granted to an individual based on information about that individual; the act of determining whether to grant or to deny a principal access to a resource.

Backend

Repository that stores directory data. Different implementations with different capabilities exist.

Binary copy

Binary backup archive of one directory server that can be restored on another directory server.

Bind operation

LDAP authentication operation to determine the client's identity in LDAP terms, the identity which is later used by the server to authorize (or not) access to directory data that the client wants to lookup or change.

Branch

The distinguished name (DN) of a non-leaf entry in the Directory Information Tree (DIT), and also that entry and all its subordinates taken together.

Some administrative operations allow you to include or exclude branches by specifying the DN of the branch.

See also Suffix.

Collective attribute

A standard mechanism for defining attributes that appear on all the entries in a particular subtree.

Compare operation

LDAP operation to compare a specified attribute value with the value stored on an entry in the directory.

Control

Information added to an LDAP message to further specify how an LDAP operation should be processed. OpenDJ supports many LDAP controls.

Database cache

Memory space set aside to hold database content.

debug log

Server log tracing details needed to troubleshoot a problem in the server.

Delete operation

LDAP operation to remove an existing entry or entries from the directory.

Directory

A directory is a network service which lists participants in the network such as users, computers, printers, and groups. The directory provides a convenient, centralized, and robust mechanism for publishing and consuming information about network participants.

Directory hierarchy

A directory can be organized into a hierarchy in order to make it easier to browse or manage. Directory hierarchies normally represent something in the physical world, such as organizational hierarchies or physical locations. For example, the top level of a directory may represent a company, the next level down divisions, the next level down departments, and down the hierarchy. Alternately, the top level may represent the world, the next level down countries, next states or provinces, and next cities.

Directory Information Tree (DIT)

A set of directory entries organized hierarchically in a tree structure, where the vertices are the entries and the arcs between vertices define relationships between entries

Directory manager

Default Root DN who has privileges to do full administration of the OpenDJ server, including bypassing access control evaluation, changing access controls, and changing administrative privileges.

See also Root DN.

Directory object

A directory object is an item in a directory. Example objects include users, user groups, computers, and more. Objects may be organized into a hierarchy and contain identifying attributes.

See also Entry.

Directory proxy server

Server that forwards LDAP requests to remote directory servers. A standalone directory proxy server does not store user data.

See also Directory server.

Directory server

Server application for centralizing information about network participants. A highly available directory service consists of multiple directory servers configured to replicate directory data.

See also Directory, Replication.

Directory Services Markup Language (DSML)

Standard language to access directory services using XML. DMSL v1 defined an XML mapping of LDAP objects, while DSMLv2 maps the LDAP Protocol and data model to XML.

Distinguished name (DN)

Fully qualified name for a directory entry, such as uid=bjensen,ou=People,dc=example,dc=com, built by concatenating the entry RDN (uid=bjensen) with the DN of the parent entry (ou=People,dc=example,dc=com).

Dynamic group

Group that specifies members using LDAP URLs.

Entry

As generic and hierarchical data stores, directories always contain different kinds of entries, either nodes (or containers) or leaf entries. An entry is an object in the directory, defined by one of more object classes and their related attributes. At startup, OpenDJ reports the number of entries contained in each suffix.

Entry cache

Memory space set aside to hold frequently accessed, large entries, such as static groups.

Equality index

Index used to match values that correspond exactly (though generally without case sensitivity) to the value provided in the search filter.

errors log

Server log tracing server events, error conditions, and warnings, categorized and identified by severity.

Export

Save directory data in an LDIF file.

Extended operation

Additional LDAP operation not included in the original standards. OpenDJ servers support several standard LDAP extended operations.

Extensible match index

Index for a matching rule other than approximate, equality, ordering, presence, substring or VLV, such as an index for generalized time.

External user

An individual that accesses company resources or services but is not working for the company. Typically a customer or partner.

Filter

An LDAP search filter is an expression that the server uses to find entries that match a search request, such as (mail=*@example.com) to match all entries having an email address in the example.com domain.

Group

Entry identifying a set of members whose entries are also in the directory.

Idle time limit

Defines how long OpenDJ allows idle connections to remain open.

Import

Read in and index directory data from an LDIF file.

Inactive user

An entry in the directory that once represented a user but which is now no longer able to be authenticated.

Index

Directory server backend feature to allow quick lookup of entries based on their attribute values.

See also Approximate index, Equality index, Extensible match index, Ordering index, Presence index, Substring index, Virtual list view (VLV) index, Index entry limit.

Index entry limit

When the number of entries that an index key points to exceeds the index entry limit, OpenDJ stops maintaining the list of entries for that index key.

Internal user

An individual who works within the company either as an employee or as a contractor.

LDAP Data Interchange Format (LDIF)

Standard, portable, text-based representation of directory content. See RFC 2849.

LDAP URL

LDAP Uniform Resource Locator such as ldap://directory.example.com:389/dc=example,dc=com??sub?(uid=bjensen). See RFC 2255.

LDAPS

LDAP over SSL.

Lightweight Directory Access Protocol (LDAP)

A simple and standardized network protocol used by applications to connect to a directory, search for objects and add, edit or remove objects. See RFC 4510.

Lookthrough limit

Defines the maximum number of candidate entries OpenDJ considers when processing a search.

Matching rule

Defines rules for performing matching operations against assertion values. Matching rules are frequently associated with an attribute syntax and are used to compare values according to that syntax. For example, the distinguishedNameEqualityMatch matching rule can be used to determine whether two DNs are equal and can ignore unnecessary spaces around commas and equal signs, differences in capitalization in attribute names, and other discrepancies.

Modify DN operation

LDAP modification operation to request that the server change the distinguished name of an entry.

Modify operation

LDAP modification operation to request that the server change one or more attributes of an entry.

Naming context

Base DN under which client applications can look for user data.

Object class

Identifies entries that share certain characteristics. Most commonly, an entry's object classes define the attributes that must and may be present on the entry. Object classes are stored on entries as values of the objectClass attribute. Object classes are defined in the directory schema, and can be abstract (defining characteristics for other object classes to inherit), structural (defining the basic structure of an entry, one structural inheritance per entry), or auxiliary (for decorating entries already having a structural object class with other required and optional attributes).

Object identifier (OID)

String that uniquely identifies an object, such as 0.9.2342.19200300.100.1.1 for the user ID attribute or 1.3.6.1.4.1.1466.115.121.1.15 for DirectoryString syntax.

Operational attribute

An attribute that has a special (operational) meaning for the server, such as pwdPolicySubentry or modifyTimestamp.

Ordering index

Index used to match values for a filter that specifies a range.

Password policy

A set of rules regarding what sequence of characters constitutes an acceptable password. Acceptable passwords are generally those that would be too difficult for another user or an automated program to guess and thereby defeat the password mechanism. Password policies may require a minimum length, a mixture of different types of characters (lowercase, uppercase, digits, punctuation marks, and other characters), avoiding dictionary words or passwords based on the user's name, and other attributes. Password policies may also require that users not reuse old passwords and that users change their passwords regularly.

Password reset

Password change performed by a user other than the user who owns the entry.

Password storage scheme

Mechanism for encoding user passwords stored on directory entries. OpenDJ implements a number of password storage schemes.

Password validator

Mechanism for determining whether a proposed password is acceptable for use. OpenDJ implements a number of password validators.

Plugin

Java library with accompanying configuration that implements a feature through processing that is not essential to the core operation of an OpenDJ server.

As the name indicates, plugins can be plugged in to an installed server for immediate configuration and use without recompiling the server.

OpenDJ servers invoke plugins at specific points in the lifecycle of a client request. The OpenDJ configuration framework lets directory administrators manage plugins with the same tools used to manage the server.

Presence index

Index used to match the fact that an attribute is present on the entry, regardless of the value.

Principal

Entity that can be authenticated, such as a user, a device, or an application.

Privilege

Server configuration settings controlling access to administrative operations such as exporting and importing data, restarting the server, performing password reset, and changing the server configuration.

Privileges are implemented independently from access control instructions (ACI), which apply to LDAP operations and user data.

See also Access control instruction (ACI).

Referential integrity

Ensuring that group membership remains consistent following changes to member entries.

referint log

Server log tracing referential integrity events, with entries similar to the errors log.

Referral

Reference to another directory location, which can be another directory server running elsewhere or another container on the same server, where the current operation can be processed.

Relative distinguished name (RDN)

Initial portion of a DN that distinguishes the entry from all other entries at the same level, such as uid=bjensen in uid=bjensen,ou=People,dc=example,dc=com.

Replication

Data synchronization that ensures all directory servers participating eventually share a consistent set of directory data.

replication log

Server log tracing replication events, with entries similar to the errors log.

Replication server

Server dedicated to transmitting replication messages. A standalone replication server does not store user data.

Root DN

A directory superuser, whose account is specific to a server under cn=Root DNs,cn=config.

The default Root DN is Directory Manager. You can create additional Root DN accounts, each with different administrative privileges.

See also Directory manager, Privilege.

Root DSE

The directory entry with distinguished name "" (empty string), where DSE is an acronym for DSA-Specific Entry. DSA is an acronym for Directory Server Agent, a single directory server. The root DSE serves to expose information over LDAP about what the directory server supports in terms of LDAP controls, auth password schemes, SASL mechanisms, LDAP protocol versions, naming contexts, features, LDAP extended operations, and other information.

Schema

LDAP schema defines the object classes, attributes types, attribute value syntaxes, matching rules and other constrains on entries held by the directory server.

Search filter

See Filter.

Search operation

LDAP lookup operation where a client requests that the server return entries based on an LDAP filter and a base DN under which to search.

Simple authentication

Bind operation performed with a user's entry DN and user's password. Use simple authentication only if the network connection is secure.

Size limit

Sets the maximum number of entries returned for a search.

Static group

Group that enumerates member entries.

Subentry

An entry, such as a password policy entry, that resides with the user data but holds operational data, and is not visible in search results unless explicitly requested.

Substring index

Index used to match values specified with wildcards in the filter.

Suffix

The distinguished name (DN) of a root entry in the Directory Information Tree (DIT), and also that entry and all its subordinates taken together as a single object of administrative tasks such as export, import, indexing, and replication.

Task

Mechanism to provide remote access to server administrative functions. OpenDJ software supports tasks to back up and restore backends, to import and export LDIF files, and to stop and restart the server.

Time limit

Defines the maximum processing time OpenDJ devotes to a search operation.

Unbind operation

LDAP operation to release resources at the end of a session.

Unindexed search

Search operation for which no matching index is available. If no indexes are applicable, then the directory server potentially has to go through all entries to look for candidate matches. For this reason, the unindexed-search privilege, which allows users to request searches for which no applicable index exists, is reserved for the directory manager by default.

User

An entry that represents an individual that can be authenticated through credentials contained or referenced by its attributes. A user may represent an internal user or an external user, and may be an active user or an inactive user.

User attribute

An attribute for storing user data on a directory entry such as mail or givenname.

Virtual attribute

An attribute with dynamically generated values that appear in entries but are not persistently stored in the backend.

Virtual directory

An application that exposes a consolidated view of multiple physical directories over an LDAP interface. Consumers of the directory information connect to the virtual directory's LDAP service. Behind the scenes, requests for information and updates to the directory are sent to one or more physical directories where the actual information resides. Virtual directories enable organizations to create a consolidated view of information that for legal or technical reasons cannot be consolidated into a single physical copy.

Virtual list view (VLV) index

Browsing index designed to help the directory server respond to client applications that need, for example, to browse through a long list of results a page at a time in a GUI.

Virtual static group

OpenDJ group that lets applications see dynamic groups as what appear to be static groups.

X.500

A family of standardized protocols for accessing, browsing and maintaining a directory. X.500 is functionally similar to LDAP, but is generally considered to be more complex, and has consequently not been widely adopted.

Read a different version of :