Configuration settings accessible through the dsconfig command.

The dsconfig create-access-log-filtering-criteria command takes the following options:

--publisher-name {name}

The name of the Access Log Publisher.

--criteria-name {name}

The name of the new Access Log Filtering Criteria.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-account-status-notification-handler command takes the following options:

--handler-name {name}

The name of the new Account Status Notification Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Account Status Notification Handler which should be created. The value for TYPE can be one of: custom | error-log | smtp.

The dsconfig create-alert-handler command takes the following options:

--handler-name {name}

The name of the new Alert Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Alert Handler which should be created. The value for TYPE can be one of: custom | jmx | smtp.

The dsconfig create-backend command takes the following options:

--backend-name {STRING}

The name of the new Backend which will also be used as the value of the "backend-id" property: Specifies a name to identify the associated backend.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Backend which should be created. The value for TYPE can be one of: backup | custom | je | ldif | memory | monitor | null | proxy | schema | task | trust-store.

The dsconfig create-backend-index command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {OID}

The name of the new Backend Index which will also be used as the value of the "attribute" property: Specifies the name of the attribute for which the index is to be maintained.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-backend-vlv-index command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {STRING}

The name of the new Backend VLV Index which will also be used as the value of the "name" property: Specifies a unique name for this VLV index.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-certificate-mapper command takes the following options:

--mapper-name {name}

The name of the new Certificate Mapper.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Certificate Mapper which should be created. The value for TYPE can be one of: custom | fingerprint | subject-attribute-to-user-attribute | subject-dn-to-user-attribute | subject-equals-dn.

The dsconfig create-connection-handler command takes the following options:

--handler-name {name}

The name of the new Connection Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Connection Handler which should be created. The value for TYPE can be one of: custom | http | jmx | ldap | ldif | snmp.

The dsconfig create-debug-target command takes the following options:

--publisher-name {name}

The name of the Debug Log Publisher.

--target-name {STRING}

The name of the new Debug Target which will also be used as the value of the "debug-scope" property: Specifies the fully-qualified OpenDJ Java package, class, or method affected by the settings in this target definition. Use the number character (#) to separate the class name and the method name (that is, org.opends.server.core.DirectoryServer#startUp).

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-entry-cache command takes the following options:

--cache-name {name}

The name of the new Entry Cache.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Entry Cache which should be created. The value for TYPE can be one of: custom | fifo | soft-reference.

The dsconfig create-extended-operation-handler command takes the following options:

--handler-name {name}

The name of the new Extended Operation Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Extended Operation Handler which should be created. The value for TYPE can be one of: cancel | custom | get-connection-id | get-symmetric-key | password-modify | password-policy-state | start-tls | who-am-i.

The dsconfig create-global-access-control-policy command takes the following options:

--policy-name {name}

The name of the new Global Access Control Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-group-implementation command takes the following options:

--implementation-name {name}

The name of the new Group Implementation.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Group Implementation which should be created. The value for TYPE can be one of: custom | dynamic | static | virtual-static.

The dsconfig create-http-authorization-mechanism command takes the following options:

--mechanism-name {name}

The name of the new HTTP Authorization Mechanism.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of HTTP Authorization Mechanism which should be created. The value for TYPE can be one of: http-anonymous-authorization-mechanism | http-basic-authorization-mechanism | http-oauth2-cts-authorization-mechanism | http-oauth2-file-authorization-mechanism | http-oauth2-openam-authorization-mechanism | http-oauth2-token-introspection-authorization-mechanism.

The dsconfig create-http-endpoint command takes the following options:

--endpoint-name {STRING}

The name of the new HTTP Endpoint which will also be used as the value of the "base-path" property: All HTTP requests matching the base path or subordinate to it will be routed to the HTTP endpoint unless a more specific HTTP endpoint is found.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of HTTP Endpoint which should be created (Default: generic). The value for TYPE can be one of: admin-endpoint | alive-endpoint | crest-metrics-endpoint | generic | healthy-endpoint | prometheus-endpoint | rest2ldap-endpoint.

Default: generic

The dsconfig create-identity-mapper command takes the following options:

--mapper-name {name}

The name of the new Identity Mapper.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Identity Mapper which should be created. The value for TYPE can be one of: custom | exact-match | regular-expression.

The dsconfig create-key-manager-provider command takes the following options:

--provider-name {name}

The name of the new Key Manager Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Key Manager Provider which should be created. The value for TYPE can be one of: custom | file-based | ldap | pkcs11.

The dsconfig create-log-publisher command takes the following options:

--publisher-name {name}

The name of the new Log Publisher.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Log Publisher which should be created. The value for TYPE can be one of: csv-file-access | csv-file-http-access | custom-access | custom-debug | custom-error | custom-http-access | external-access | external-http-access | file-based-access | file-based-audit | file-based-debug | file-based-error | file-based-http-access | json-file-access | json-file-http-access.

The dsconfig create-log-retention-policy command takes the following options:

--policy-name {name}

The name of the new Log Retention Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Log Retention Policy which should be created. The value for TYPE can be one of: custom | file-count | free-disk-space | size-limit.

The dsconfig create-log-rotation-policy command takes the following options:

--policy-name {name}

The name of the new Log Rotation Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Log Rotation Policy which should be created. The value for TYPE can be one of: custom | fixed-time | size-limit | time-limit.

The dsconfig create-password-generator command takes the following options:

--generator-name {name}

The name of the new Password Generator.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Password Generator which should be created. The value for TYPE can be one of: custom | random.

The dsconfig create-password-policy command takes the following options:

--policy-name {name}

The name of the new Authentication Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Authentication Policy which should be created. The value for TYPE can be one of: ldap-pass-through | password-policy.

The dsconfig create-password-storage-scheme command takes the following options:

--scheme-name {name}

The name of the new Password Storage Scheme.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Password Storage Scheme which should be created. The value for TYPE can be one of: aes | base64 | bcrypt | blowfish | clear | crypt | custom | md5 | pbkdf2 | pkcs5s2 | rc4 | salted-md5 | salted-sha1 | salted-sha256 | salted-sha384 | salted-sha512 | sha1 | triple-des.

The dsconfig create-password-validator command takes the following options:

--validator-name {name}

The name of the new Password Validator.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Password Validator which should be created. The value for TYPE can be one of: attribute-value | character-set | custom | dictionary | length-based | repeated-characters | similarity-based | unique-characters.

The dsconfig create-plugin command takes the following options:

--plugin-name {name}

The name of the new Plugin.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Plugin which should be created. The value for TYPE can be one of: attribute-cleanup | change-number-control | custom | entry-uuid | fractional-ldif-import | graphite-monitor-reporter | last-mod | ldap-attribute-description-list | password-policy-import | profiler | referential-integrity | samba-password | seven-bit-clean | unique-attribute.

The dsconfig create-replication-domain command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the new Replication Domain.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-replication-server command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

The dsconfig create-sasl-mechanism-handler command takes the following options:

--handler-name {name}

The name of the new SASL Mechanism Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of SASL Mechanism Handler which should be created. The value for TYPE can be one of: anonymous | cram-md5 | custom | digest-md5 | external | gssapi | plain.

The dsconfig create-schema-provider command takes the following options:

--provider-name {name}

The name of the new Schema Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Schema Provider which should be created (Default: generic). The value for TYPE can be one of: core-schema | generic | json-equality-matching-rule | json-ordering-matching-rule | json-query-equality-matching-rule.

Default: generic

The dsconfig create-service-discovery-mechanism command takes the following options:

--mechanism-name {name}

The name of the new Service Discovery Mechanism.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Service Discovery Mechanism which should be created. The value for TYPE can be one of: custom | replication | static.

The dsconfig create-synchronization-provider command takes the following options:

--provider-name {name}

The name of the new Synchronization Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Synchronization Provider which should be created. The value for TYPE can be one of: custom | replication.

The dsconfig create-trust-manager-provider command takes the following options:

--provider-name {name}

The name of the new Trust Manager Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Trust Manager Provider which should be created. The value for TYPE can be one of: blind | custom | file-based | ldap | pkcs11.

The dsconfig create-virtual-attribute command takes the following options:

--name {name}

The name of the new Virtual Attribute.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

-t | --type {type}

The type of Virtual Attribute which should be created. The value for TYPE can be one of: collective-attribute-subentries | custom | entity-tag | entry-dn | entry-uuid | governing-structure-rule | has-subordinates | is-member-of | member | num-subordinates | password-expiration-time | password-policy-subentry | structural-object-class | subschema-subentry | user-defined.

The dsconfig delete-access-log-filtering-criteria command takes the following options:

--publisher-name {name}

The name of the Access Log Publisher.

--criteria-name {name}

The name of the Access Log Filtering Criteria.

-f | --force

Ignore non-existent Access Log Filtering Criteria.

Default: false

The dsconfig delete-account-status-notification-handler command takes the following options:

--handler-name {name}

The name of the Account Status Notification Handler.

-f | --force

Ignore non-existent Account Status Notification Handlers.

Default: false

The dsconfig delete-alert-handler command takes the following options:

--handler-name {name}

The name of the Alert Handler.

-f | --force

Ignore non-existent Alert Handlers.

Default: false

The dsconfig delete-backend command takes the following options:

--backend-name {name}

The name of the Backend.

-f | --force

Ignore non-existent Backends.

Default: false

The dsconfig delete-backend-index command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend Index.

-f | --force

Ignore non-existent Backend Indexes.

Default: false

The dsconfig delete-backend-vlv-index command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend VLV Index.

-f | --force

Ignore non-existent Backend VLV Indexes.

Default: false

The dsconfig delete-certificate-mapper command takes the following options:

--mapper-name {name}

The name of the Certificate Mapper.

-f | --force

Ignore non-existent Certificate Mappers.

Default: false

The dsconfig delete-connection-handler command takes the following options:

--handler-name {name}

The name of the Connection Handler.

-f | --force

Ignore non-existent Connection Handlers.

Default: false

The dsconfig delete-debug-target command takes the following options:

--publisher-name {name}

The name of the Debug Log Publisher.

--target-name {name}

The name of the Debug Target.

-f | --force

Ignore non-existent Debug Targets.

Default: false

The dsconfig delete-entry-cache command takes the following options:

--cache-name {name}

The name of the Entry Cache.

-f | --force

Ignore non-existent Entry Caches.

Default: false

The dsconfig delete-extended-operation-handler command takes the following options:

--handler-name {name}

The name of the Extended Operation Handler.

-f | --force

Ignore non-existent Extended Operation Handlers.

Default: false

The dsconfig delete-global-access-control-policy command takes the following options:

--policy-name {name}

The name of the Global Access Control Policy.

-f | --force

Ignore non-existent Global Access Control Policies.

Default: false

The dsconfig delete-group-implementation command takes the following options:

--implementation-name {name}

The name of the Group Implementation.

-f | --force

Ignore non-existent Group Implementations.

Default: false

The dsconfig delete-http-authorization-mechanism command takes the following options:

--mechanism-name {name}

The name of the HTTP Authorization Mechanism.

-f | --force

Ignore non-existent HTTP Authorization Mechanisms.

Default: false

The dsconfig delete-http-endpoint command takes the following options:

--endpoint-name {name}

The name of the HTTP Endpoint.

-f | --force

Ignore non-existent HTTP Endpoints.

Default: false

The dsconfig delete-identity-mapper command takes the following options:

--mapper-name {name}

The name of the Identity Mapper.

-f | --force

Ignore non-existent Identity Mappers.

Default: false

The dsconfig delete-key-manager-provider command takes the following options:

--provider-name {name}

The name of the Key Manager Provider.

-f | --force

Ignore non-existent Key Manager Providers.

Default: false

The dsconfig delete-log-publisher command takes the following options:

--publisher-name {name}

The name of the Log Publisher.

-f | --force

Ignore non-existent Log Publishers.

Default: false

The dsconfig delete-log-retention-policy command takes the following options:

--policy-name {name}

The name of the Log Retention Policy.

-f | --force

Ignore non-existent Log Retention Policies.

Default: false

The dsconfig delete-log-rotation-policy command takes the following options:

--policy-name {name}

The name of the Log Rotation Policy.

-f | --force

Ignore non-existent Log Rotation Policies.

Default: false

The dsconfig delete-password-generator command takes the following options:

--generator-name {name}

The name of the Password Generator.

-f | --force

Ignore non-existent Password Generators.

Default: false

The dsconfig delete-password-policy command takes the following options:

--policy-name {name}

The name of the Authentication Policy.

-f | --force

Ignore non-existent Authentication Policies.

Default: false

The dsconfig delete-password-storage-scheme command takes the following options:

--scheme-name {name}

The name of the Password Storage Scheme.

-f | --force

Ignore non-existent Password Storage Schemes.

Default: false

The dsconfig delete-password-validator command takes the following options:

--validator-name {name}

The name of the Password Validator.

-f | --force

Ignore non-existent Password Validators.

Default: false

The dsconfig delete-plugin command takes the following options:

--plugin-name {name}

The name of the Plugin.

-f | --force

Ignore non-existent Plugins.

Default: false

The dsconfig delete-replication-domain command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the Replication Domain.

-f | --force

Ignore non-existent Replication Domains.

Default: false

The dsconfig delete-replication-server command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

-f | --force

Ignore non-existent Replication Servers.

Default: false

The dsconfig delete-sasl-mechanism-handler command takes the following options:

--handler-name {name}

The name of the SASL Mechanism Handler.

-f | --force

Ignore non-existent SASL Mechanism Handlers.

Default: false

The dsconfig delete-schema-provider command takes the following options:

--provider-name {name}

The name of the Schema Provider.

-f | --force

Ignore non-existent Schema Providers.

Default: false

The dsconfig delete-service-discovery-mechanism command takes the following options:

--mechanism-name {name}

The name of the Service Discovery Mechanism.

-f | --force

Ignore non-existent Service Discovery Mechanisms.

Default: false

The dsconfig delete-synchronization-provider command takes the following options:

--provider-name {name}

The name of the Synchronization Provider.

-f | --force

Ignore non-existent Synchronization Providers.

Default: false

The dsconfig delete-trust-manager-provider command takes the following options:

--provider-name {name}

The name of the Trust Manager Provider.

-f | --force

Ignore non-existent Trust Manager Providers.

Default: false

The dsconfig delete-virtual-attribute command takes the following options:

--name {name}

The name of the Virtual Attribute.

-f | --force

Ignore non-existent Virtual Attributes.

Default: false

The dsconfig get-access-control-handler-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-access-log-filtering-criteria-prop command takes the following options:

--publisher-name {name}

The name of the Access Log Publisher.

--criteria-name {name}

The name of the Access Log Filtering Criteria.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-account-status-notification-handler-prop command takes the following options:

--handler-name {name}

The name of the Account Status Notification Handler.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-administration-connector-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-alert-handler-prop command takes the following options:

--handler-name {name}

The name of the Alert Handler.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-backend-index-prop command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend Index.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-backend-prop command takes the following options:

--backend-name {name}

The name of the Backend.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-backend-vlv-index-prop command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend VLV Index.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-certificate-mapper-prop command takes the following options:

--mapper-name {name}

The name of the Certificate Mapper.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-connection-handler-prop command takes the following options:

--handler-name {name}

The name of the Connection Handler.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-crypto-manager-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-debug-target-prop command takes the following options:

--publisher-name {name}

The name of the Debug Log Publisher.

--target-name {name}

The name of the Debug Target.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-entry-cache-prop command takes the following options:

--cache-name {name}

The name of the Entry Cache.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-extended-operation-handler-prop command takes the following options:

--handler-name {name}

The name of the Extended Operation Handler.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-external-changelog-domain-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the Replication Domain.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-global-access-control-policy-prop command takes the following options:

--policy-name {name}

The name of the Global Access Control Policy.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-global-configuration-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-group-implementation-prop command takes the following options:

--implementation-name {name}

The name of the Group Implementation.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-http-authorization-mechanism-prop command takes the following options:

--mechanism-name {name}

The name of the HTTP Authorization Mechanism.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-http-endpoint-prop command takes the following options:

--endpoint-name {name}

The name of the HTTP Endpoint.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-identity-mapper-prop command takes the following options:

--mapper-name {name}

The name of the Identity Mapper.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-key-manager-provider-prop command takes the following options:

--provider-name {name}

The name of the Key Manager Provider.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-log-publisher-prop command takes the following options:

--publisher-name {name}

The name of the Log Publisher.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-log-retention-policy-prop command takes the following options:

--policy-name {name}

The name of the Log Retention Policy.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-log-rotation-policy-prop command takes the following options:

--policy-name {name}

The name of the Log Rotation Policy.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-password-generator-prop command takes the following options:

--generator-name {name}

The name of the Password Generator.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-password-policy-prop command takes the following options:

--policy-name {name}

The name of the Authentication Policy.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-password-storage-scheme-prop command takes the following options:

--scheme-name {name}

The name of the Password Storage Scheme.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-password-validator-prop command takes the following options:

--validator-name {name}

The name of the Password Validator.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-plugin-prop command takes the following options:

--plugin-name {name}

The name of the Plugin.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-plugin-root-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-replication-domain-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the Replication Domain.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-replication-server-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-root-dse-backend-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-sasl-mechanism-handler-prop command takes the following options:

--handler-name {name}

The name of the SASL Mechanism Handler.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-schema-provider-prop command takes the following options:

--provider-name {name}

The name of the Schema Provider.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-service-discovery-mechanism-prop command takes the following options:

--mechanism-name {name}

The name of the Service Discovery Mechanism.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-synchronization-provider-prop command takes the following options:

--provider-name {name}

The name of the Synchronization Provider.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-trust-manager-provider-prop command takes the following options:

--provider-name {name}

The name of the Trust Manager Provider.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-virtual-attribute-prop command takes the following options:

--name {name}

The name of the Virtual Attribute.

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig get-work-queue-prop command takes the following options:

--property {property}

The name of a property to be displayed.

--record

Modifies the display output to show one property value per line.

Default: false

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-access-log-filtering-criteria command takes the following options:

--publisher-name {name}

The name of the Access Log Publisher.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-account-status-notification-handlers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-alert-handlers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-backend-indexes command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-backend-vlv-indexes command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-backends command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-certificate-mappers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-connection-handlers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-debug-targets command takes the following options:

--publisher-name {name}

The name of the Debug Log Publisher.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-entry-caches command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-extended-operation-handlers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-global-access-control-policies command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-group-implementations command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-http-authorization-mechanisms command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-http-endpoints command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-identity-mappers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-key-manager-providers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-log-publishers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-log-retention-policies command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-log-rotation-policies command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-password-generators command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-password-policies command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-password-storage-schemes command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-password-validators command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-plugins command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-properties command takes the following options:

-c | --category {category}

The category of components whose properties should be described.

-t | --type {type}

The type of components whose properties should be described. The value for TYPE must be one of the component types associated with the CATEGORY specified using the "--category" option.

--inherited

Modifies the display output to show the inherited properties of components.

Default: false

--property {property}

The name of a property to be displayed.

The dsconfig list-replication-domains command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-replication-server command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-sasl-mechanism-handlers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-schema-providers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-service-discovery-mechanisms command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-synchronization-providers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-trust-manager-providers command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig list-virtual-attributes command takes the following options:

--property {property}

The name of a property to be displayed.

-z | --unit-size {unit}

Display size data using the specified unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, gigabytes, or terabytes).

-m | --unit-time {unit}

Display time data using the specified unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, seconds, minutes, hours, days, or weeks).

The dsconfig set-access-control-handler-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-access-log-filtering-criteria-prop command takes the following options:

--publisher-name {name}

The name of the Access Log Publisher.

--criteria-name {name}

The name of the Access Log Filtering Criteria.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-account-status-notification-handler-prop command takes the following options:

--handler-name {name}

The name of the Account Status Notification Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-administration-connector-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-alert-handler-prop command takes the following options:

--handler-name {name}

The name of the Alert Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-backend-index-prop command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend Index.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-backend-prop command takes the following options:

--backend-name {name}

The name of the Backend.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-backend-vlv-index-prop command takes the following options:

--backend-name {name}

The name of the Pluggable Backend.

--index-name {name}

The name of the Backend VLV Index.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-certificate-mapper-prop command takes the following options:

--mapper-name {name}

The name of the Certificate Mapper.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-connection-handler-prop command takes the following options:

--handler-name {name}

The name of the Connection Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-crypto-manager-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-debug-target-prop command takes the following options:

--publisher-name {name}

The name of the Debug Log Publisher.

--target-name {name}

The name of the Debug Target.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-entry-cache-prop command takes the following options:

--cache-name {name}

The name of the Entry Cache.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-extended-operation-handler-prop command takes the following options:

--handler-name {name}

The name of the Extended Operation Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-external-changelog-domain-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the Replication Domain.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-global-access-control-policy-prop command takes the following options:

--policy-name {name}

The name of the Global Access Control Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-global-configuration-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-group-implementation-prop command takes the following options:

--implementation-name {name}

The name of the Group Implementation.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-http-authorization-mechanism-prop command takes the following options:

--mechanism-name {name}

The name of the HTTP Authorization Mechanism.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-http-endpoint-prop command takes the following options:

--endpoint-name {name}

The name of the HTTP Endpoint.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-identity-mapper-prop command takes the following options:

--mapper-name {name}

The name of the Identity Mapper.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-key-manager-provider-prop command takes the following options:

--provider-name {name}

The name of the Key Manager Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-log-publisher-prop command takes the following options:

--publisher-name {name}

The name of the Log Publisher.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-log-retention-policy-prop command takes the following options:

--policy-name {name}

The name of the Log Retention Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-log-rotation-policy-prop command takes the following options:

--policy-name {name}

The name of the Log Rotation Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-password-generator-prop command takes the following options:

--generator-name {name}

The name of the Password Generator.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-password-policy-prop command takes the following options:

--policy-name {name}

The name of the Authentication Policy.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-password-storage-scheme-prop command takes the following options:

--scheme-name {name}

The name of the Password Storage Scheme.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-password-validator-prop command takes the following options:

--validator-name {name}

The name of the Password Validator.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-plugin-prop command takes the following options:

--plugin-name {name}

The name of the Plugin.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-plugin-root-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-replication-domain-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--domain-name {name}

The name of the Replication Domain.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-replication-server-prop command takes the following options:

--provider-name {name}

The name of the Replication Synchronization Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-root-dse-backend-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-sasl-mechanism-handler-prop command takes the following options:

--handler-name {name}

The name of the SASL Mechanism Handler.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-schema-provider-prop command takes the following options:

--provider-name {name}

The name of the Schema Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-service-discovery-mechanism-prop command takes the following options:

--mechanism-name {name}

The name of the Service Discovery Mechanism.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-synchronization-provider-prop command takes the following options:

--provider-name {name}

The name of the Synchronization Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-trust-manager-provider-prop command takes the following options:

--provider-name {name}

The name of the Trust Manager Provider.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-virtual-attribute-prop command takes the following options:

--name {name}

The name of the Virtual Attribute.

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.

The dsconfig set-work-queue-prop command takes the following options:

--set {PROP:VALUE}

Assigns a value to a property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

--reset {property}

Resets a property back to its default values where PROP is the name of the property to be reset.

--add {PROP:VALUE}

Adds a single value to a property where PROP is the name of the property and VALUE is the single value to be added.

--remove {PROP:VALUE}

Removes a single value from a property where PROP is the name of the property and VALUE is the single value to be removed.