OAuth2Module

{
  "type" : "object",
  "properties" : {
    "promptForPassword" : {
      "title" : "Prompt for password setting and activation code",
      "description" : "Users must set a password and complete the activation flow during dynamic profile creation.<br><br>If this is enabled, the user must set a password before the system creates an account dynamically and an activation code will be sent to the user's email address. The account will be created only if the password and activation code are properly set. <br />If this is disabled, the account will be created transparently without prompting the user.",
      "propertyOrder" : 1700,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "clientSecret" : {
      "title" : "Client Secret",
      "description" : "OAuth client_secret parameter<br><br>For more information on the OAuth client_secret parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
      "propertyOrder" : 200,
      "required" : true,
      "type" : "string",
      "format" : "password",
      "exampleValue" : ""
    },
    "logoutBehaviour" : {
      "title" : "Logout options",
      "description" : "Controls how Logout options will be presented to the user.<br><br>The OAuth module has the following logout options for the user:<br/><br/><ul><li>Prompt: Prompt the user to logout from the OAuth 2.0 Provider</li><li>Logout: Logout from the OAuth 2.0 Provider and do not prompt</li><li>Do not logout: Do not logout the user from the OAuth 2.0 Provider and do not prompt</li></ul>",
      "propertyOrder" : 2100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oauth2EmailAttribute" : {
      "title" : "Email attribute in OAuth2 Response",
      "description" : "Attribute from the OAuth2 response used to send activation code emails.<br><br>The attribute in the response from the profile service in the OAuth 2.0 Provider that contains the email address of the authenticated user. This address will be used to send an email with an activation code when the accounts are allowed to be created dynamically.",
      "propertyOrder" : 1500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "createAccount" : {
      "title" : "Create account if it does not exist",
      "description" : "If the OAuth2 account does not exist in the local OpenAM data store, an account will be created dynamically.<br><br>If this is enabled, the account mapper could create the account dynamically if there is no account mapped. Before creating the account, a dialog prompting for a password and asking for an activation code can be shown if the parameter \"Prompt for password setting and activation code\" is enabled.<br /><br />If this flag is not enabled, 3 alternative options exist:<br/><br/><ol><li>The accounts need to have a user profile in the OpenAM User Data Store</li><li>The user does not have a user profile and the \"Ignore Profile\" is set in the Authentication Service of the realm.</li><li>The account is mapped to an anonymous account (see parameter \"Map to anonymous user\" and \"Anonymous User\")</li></ol>",
      "propertyOrder" : 1600,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "anonymousUserName" : {
      "title" : "Anonymous User",
      "description" : "Username of the OpenAM anonymous user<br><br>The username of the user that will represent the anonymous user. This user account must already exist in the realm.",
      "propertyOrder" : 1900,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "openidConnectIssuer" : {
      "title" : "Token Issuer",
      "description" : "Required when the 'openid' scope is included. Value must match the iss field in issued ID Token<br/>e.g. accounts.google.com<br><br>The issuer value MUST be provided when OAuth 2.0 Mix-Up Mitigation is enabled.",
      "propertyOrder" : 3200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpSslEnabled" : {
      "title" : "SMTP SSL Enabled",
      "description" : "Tick this option if the SMTP Server provides SSL",
      "propertyOrder" : 2700,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "openidConnectContextValue" : {
      "title" : "OpenID Connect validation configuration value",
      "description" : "Required when the 'openid' scope is included. The discovery url, or jwk url, or the client_secret, corresponding to the selection above.<br><br>If discovery or jwk url entered, entry must be in valid url format, <br/>e.g. https://accounts.google.com/.well-known/openid-configuration<br/><i>NB </i>If client_secret entered, entry is ignored and the value of the Client Secret is used.",
      "propertyOrder" : 3100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountMapperConfiguration" : {
      "title" : "Account Mapper Configuration",
      "description" : "Mapping of OAuth account to local OpenAM account<br><br>Attribute configuration that will be used to map the account of the user authenticated in the OAuth 2.0 Provider to the local data store in the OpenAM. Example: <code>OAuth2.0_attribute=local_attribute</code>",
      "propertyOrder" : 1100,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "saveAttributesInSession" : {
      "title" : "Save attributes in the session",
      "description" : "If this option is enabled, the attributes configured in the attribute mapper will be saved into the OpenAM session",
      "propertyOrder" : 1400,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "smtpHostPort" : {
      "title" : "SMTP port",
      "description" : "The TCP port that will be used by the SMTP gateway",
      "propertyOrder" : 2400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpPassword" : {
      "title" : "SMTP User Password",
      "description" : "The Password of the SMTP User Name",
      "propertyOrder" : 2600,
      "required" : true,
      "type" : "string",
      "format" : "password",
      "exampleValue" : ""
    },
    "userProfileServiceUrl" : {
      "title" : "User Profile Service URL",
      "description" : "User profile information URL<br><br>This URL endpoint provides user profile information and is provided by the OAuth Identity Provider<br/><br/><i>NB </i>This URL should return JSON objects in response",
      "propertyOrder" : 500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "authenticationLevel" : {
      "title" : "Authentication Level",
      "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
      "propertyOrder" : 2900,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "attributeMappingClasses" : {
      "title" : "Attribute Mapper",
      "description" : "Name of the class that implements the attribute mapping<br><br>This class maps the OAuth properties into OpenAM properties. A custom attribute mapper can be provided.<br/><br/>A custom attribute mapper must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 1200,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "mixUpMitigation" : {
      "title" : "OAuth 2.0 Mix-Up Mitigation enabled",
      "description" : "Enables OAuth 2.0 mix-up mitigation<br><br>The authorization server must support the <a href=\"https://tools.ietf.org/html/draft-ietf-oauth-mix-up-mitigation-01#section-3.1\">OAuth 2.0 Mix-Up Mitigation draft</a>, otherwise OpenAM will fail to validate responses from the authorization server. If only the OAuth 2.0 protocol is utilized, make sure that the accepted issuer value is set in the \"Token Issuer\" setting.",
      "propertyOrder" : 3300,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "openidConnectContextType" : {
      "title" : "OpenID Connect validation configuration type",
      "description" : "Required when the 'openid' scope is included. Please select either 1. the issuer discovery url, 2. the issuer jwk url, or 3. the client_secret.",
      "propertyOrder" : 3000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpUsername" : {
      "title" : "SMTP User Name",
      "description" : "If the SMTP Service requires authentication, configure the user name here",
      "propertyOrder" : 2500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "ssoProxyUrl" : {
      "title" : "Proxy URL",
      "description" : "The URL to the OpenAM OAuth proxy JSP<br><br>This URL should only be changed from the default, if an external server is performing the GET to POST proxying. The default is <code>/openam/oauth2c/OAuthProxy.jsp</code>",
      "propertyOrder" : 800,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accessTokenParameterName" : {
      "title" : "OAuth2 Access Token Profile Service Parameter name",
      "description" : "The name of the parameter that will contain the access token value when accessing the profile service",
      "propertyOrder" : 700,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "attributeMapperConfiguration" : {
      "title" : "Attribute Mapper Configuration",
      "description" : "Mapping of OAuth attributes to local OpenAM attributes<br><br>Attribute configuration that will be used to map the user info obtained from the OAuth 2.0 Provider to the local user data store in the OpenAM.<br/><br/>Example: <code>OAuth2.0_attribute=local_attribute</code>",
      "propertyOrder" : 1300,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "accessTokenEndpointUrl" : {
      "title" : "Access Token Endpoint URL",
      "description" : "OAuth access token endpoint URL<br><br>This is the URL endpoint for access token retrieval provided by the OAuth Identity Provider. Refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-3.2\" target=\"_blank\">RFC 6749</a>, section 3.2",
      "propertyOrder" : 400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountProviderClass" : {
      "title" : "Account Provider",
      "description" : "Name of the class implementing the account provider.<br><br>This class is used by the module to find the account from the attributes mapped by the Account Mapper <code>org.forgerock.openam.authentication.modules.common.mapping.AccountProvider</code> interface.<br/>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 900,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oauth2LogoutServiceUrl" : {
      "title" : "OAuth 2.0 Provider logout service",
      "description" : "The URL of the OAuth Identity Providers Logout service<br><br>OAuth 2.0 Identity Providers can have a logout service. If this logout functionality is required then the URL of the Logout endpoint should configured here.",
      "propertyOrder" : 2000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpFromAddress" : {
      "title" : "SMTP From address",
      "description" : "The email address on behalf of whom the messages will be sent",
      "propertyOrder" : 2800,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "clientId" : {
      "title" : "Client Id",
      "description" : "OAuth client_id parameter<br><br>For more information on the OAuth client_id parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
      "propertyOrder" : 100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountMapperClass" : {
      "title" : "Account Mapper",
      "description" : "Name of the class implementing the attribute mapping for the account search.<br><br>This class is used by the module to map from the account information received from the OAuth Identity Provider into OpenAM.<br/><br/>The class must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 1000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpHostName" : {
      "title" : "SMTP host",
      "description" : "The mail host that will be used by the Email Gateway implementation",
      "propertyOrder" : 2300,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "mailGatewayClass" : {
      "title" : "Mail Server Gateway implementation class",
      "description" : "The class used by the module to send email.<br><br>This class is used by the module to send email. A custom implementation can be provided.<br/><br/>The custom implementation must implement the <code>org.forgerock.openam.authentication.modules.oauth2.EmailGateway</code>",
      "propertyOrder" : 2200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "scope" : {
      "title" : "Scope",
      "description" : "OAuth scope; list of user profile properties<br><br>According to the OAuth 2.0 Authorization Framework, scope is a space-separated list of user profile attributes that the client application requires. The list depends on the permissions that the resource owner grants to the client application.<br/><br/> Some authorization servers use non-standard separators for scopes. For example, Facebook takes a comma-separated list.<br/><br/> Default: <code>email, read_stream</code> (Facebook example)",
      "propertyOrder" : 600,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "authenticationEndpointUrl" : {
      "title" : "Authentication Endpoint URL",
      "description" : "OAuth authentication endpoint URL<br><br>This is the URL endpoint for OAuth authentication provided by the OAuth Identity Provider",
      "propertyOrder" : 300,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "mapToAnonymousUser" : {
      "title" : "Map to anonymous user",
      "description" : "Enabled anonymous user access to OpenAM for OAuth authenticated users<br><br>If selected, the authenticated users in the OAuth 2.0 Provider will be mapped to the anonymous user configured in the next parameter.<br/>If not selected the users authenticated will be mapped by the parameters configured in the account mapper.<br/><br/><i>NB </i>If <i>Create account if it does not exist</i> is enabled, that parameter takes precedence.",
      "propertyOrder" : 1800,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    }
  }
}

{
  "type" : "object",
  "properties" : {
    "promptForPassword" : {
      "title" : "Prompt for password setting and activation code",
      "description" : "Users must set a password and complete the activation flow during dynamic profile creation.<br><br>If this is enabled, the user must set a password before the system creates an account dynamically and an activation code will be sent to the user's email address. The account will be created only if the password and activation code are properly set. <br />If this is disabled, the account will be created transparently without prompting the user.",
      "propertyOrder" : 1700,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "clientSecret" : {
      "title" : "Client Secret",
      "description" : "OAuth client_secret parameter<br><br>For more information on the OAuth client_secret parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
      "propertyOrder" : 200,
      "required" : true,
      "type" : "string",
      "format" : "password",
      "exampleValue" : ""
    },
    "logoutBehaviour" : {
      "title" : "Logout options",
      "description" : "Controls how Logout options will be presented to the user.<br><br>The OAuth module has the following logout options for the user:<br/><br/><ul><li>Prompt: Prompt the user to logout from the OAuth 2.0 Provider</li><li>Logout: Logout from the OAuth 2.0 Provider and do not prompt</li><li>Do not logout: Do not logout the user from the OAuth 2.0 Provider and do not prompt</li></ul>",
      "propertyOrder" : 2100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oauth2EmailAttribute" : {
      "title" : "Email attribute in OAuth2 Response",
      "description" : "Attribute from the OAuth2 response used to send activation code emails.<br><br>The attribute in the response from the profile service in the OAuth 2.0 Provider that contains the email address of the authenticated user. This address will be used to send an email with an activation code when the accounts are allowed to be created dynamically.",
      "propertyOrder" : 1500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "createAccount" : {
      "title" : "Create account if it does not exist",
      "description" : "If the OAuth2 account does not exist in the local OpenAM data store, an account will be created dynamically.<br><br>If this is enabled, the account mapper could create the account dynamically if there is no account mapped. Before creating the account, a dialog prompting for a password and asking for an activation code can be shown if the parameter \"Prompt for password setting and activation code\" is enabled.<br /><br />If this flag is not enabled, 3 alternative options exist:<br/><br/><ol><li>The accounts need to have a user profile in the OpenAM User Data Store</li><li>The user does not have a user profile and the \"Ignore Profile\" is set in the Authentication Service of the realm.</li><li>The account is mapped to an anonymous account (see parameter \"Map to anonymous user\" and \"Anonymous User\")</li></ol>",
      "propertyOrder" : 1600,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "anonymousUserName" : {
      "title" : "Anonymous User",
      "description" : "Username of the OpenAM anonymous user<br><br>The username of the user that will represent the anonymous user. This user account must already exist in the realm.",
      "propertyOrder" : 1900,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "openidConnectIssuer" : {
      "title" : "Token Issuer",
      "description" : "Required when the 'openid' scope is included. Value must match the iss field in issued ID Token<br/>e.g. accounts.google.com<br><br>The issuer value MUST be provided when OAuth 2.0 Mix-Up Mitigation is enabled.",
      "propertyOrder" : 3200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpSslEnabled" : {
      "title" : "SMTP SSL Enabled",
      "description" : "Tick this option if the SMTP Server provides SSL",
      "propertyOrder" : 2700,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "openidConnectContextValue" : {
      "title" : "OpenID Connect validation configuration value",
      "description" : "Required when the 'openid' scope is included. The discovery url, or jwk url, or the client_secret, corresponding to the selection above.<br><br>If discovery or jwk url entered, entry must be in valid url format, <br/>e.g. https://accounts.google.com/.well-known/openid-configuration<br/><i>NB </i>If client_secret entered, entry is ignored and the value of the Client Secret is used.",
      "propertyOrder" : 3100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountMapperConfiguration" : {
      "title" : "Account Mapper Configuration",
      "description" : "Mapping of OAuth account to local OpenAM account<br><br>Attribute configuration that will be used to map the account of the user authenticated in the OAuth 2.0 Provider to the local data store in the OpenAM. Example: <code>OAuth2.0_attribute=local_attribute</code>",
      "propertyOrder" : 1100,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "saveAttributesInSession" : {
      "title" : "Save attributes in the session",
      "description" : "If this option is enabled, the attributes configured in the attribute mapper will be saved into the OpenAM session",
      "propertyOrder" : 1400,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "smtpHostPort" : {
      "title" : "SMTP port",
      "description" : "The TCP port that will be used by the SMTP gateway",
      "propertyOrder" : 2400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpPassword" : {
      "title" : "SMTP User Password",
      "description" : "The Password of the SMTP User Name",
      "propertyOrder" : 2600,
      "required" : true,
      "type" : "string",
      "format" : "password",
      "exampleValue" : ""
    },
    "userProfileServiceUrl" : {
      "title" : "User Profile Service URL",
      "description" : "User profile information URL<br><br>This URL endpoint provides user profile information and is provided by the OAuth Identity Provider<br/><br/><i>NB </i>This URL should return JSON objects in response",
      "propertyOrder" : 500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "authenticationLevel" : {
      "title" : "Authentication Level",
      "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
      "propertyOrder" : 2900,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "attributeMappingClasses" : {
      "title" : "Attribute Mapper",
      "description" : "Name of the class that implements the attribute mapping<br><br>This class maps the OAuth properties into OpenAM properties. A custom attribute mapper can be provided.<br/><br/>A custom attribute mapper must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 1200,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "mixUpMitigation" : {
      "title" : "OAuth 2.0 Mix-Up Mitigation enabled",
      "description" : "Enables OAuth 2.0 mix-up mitigation<br><br>The authorization server must support the <a href=\"https://tools.ietf.org/html/draft-ietf-oauth-mix-up-mitigation-01#section-3.1\">OAuth 2.0 Mix-Up Mitigation draft</a>, otherwise OpenAM will fail to validate responses from the authorization server. If only the OAuth 2.0 protocol is utilized, make sure that the accepted issuer value is set in the \"Token Issuer\" setting.",
      "propertyOrder" : 3300,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    },
    "openidConnectContextType" : {
      "title" : "OpenID Connect validation configuration type",
      "description" : "Required when the 'openid' scope is included. Please select either 1. the issuer discovery url, 2. the issuer jwk url, or 3. the client_secret.",
      "propertyOrder" : 3000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpUsername" : {
      "title" : "SMTP User Name",
      "description" : "If the SMTP Service requires authentication, configure the user name here",
      "propertyOrder" : 2500,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "ssoProxyUrl" : {
      "title" : "Proxy URL",
      "description" : "The URL to the OpenAM OAuth proxy JSP<br><br>This URL should only be changed from the default, if an external server is performing the GET to POST proxying. The default is <code>/openam/oauth2c/OAuthProxy.jsp</code>",
      "propertyOrder" : 800,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accessTokenParameterName" : {
      "title" : "OAuth2 Access Token Profile Service Parameter name",
      "description" : "The name of the parameter that will contain the access token value when accessing the profile service",
      "propertyOrder" : 700,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "attributeMapperConfiguration" : {
      "title" : "Attribute Mapper Configuration",
      "description" : "Mapping of OAuth attributes to local OpenAM attributes<br><br>Attribute configuration that will be used to map the user info obtained from the OAuth 2.0 Provider to the local user data store in the OpenAM.<br/><br/>Example: <code>OAuth2.0_attribute=local_attribute</code>",
      "propertyOrder" : 1300,
      "required" : true,
      "items" : {
        "type" : "string"
      },
      "type" : "array",
      "exampleValue" : ""
    },
    "accessTokenEndpointUrl" : {
      "title" : "Access Token Endpoint URL",
      "description" : "OAuth access token endpoint URL<br><br>This is the URL endpoint for access token retrieval provided by the OAuth Identity Provider. Refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-3.2\" target=\"_blank\">RFC 6749</a>, section 3.2",
      "propertyOrder" : 400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountProviderClass" : {
      "title" : "Account Provider",
      "description" : "Name of the class implementing the account provider.<br><br>This class is used by the module to find the account from the attributes mapped by the Account Mapper <code>org.forgerock.openam.authentication.modules.common.mapping.AccountProvider</code> interface.<br/>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 900,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oauth2LogoutServiceUrl" : {
      "title" : "OAuth 2.0 Provider logout service",
      "description" : "The URL of the OAuth Identity Providers Logout service<br><br>OAuth 2.0 Identity Providers can have a logout service. If this logout functionality is required then the URL of the Logout endpoint should configured here.",
      "propertyOrder" : 2000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpFromAddress" : {
      "title" : "SMTP From address",
      "description" : "The email address on behalf of whom the messages will be sent",
      "propertyOrder" : 2800,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "clientId" : {
      "title" : "Client Id",
      "description" : "OAuth client_id parameter<br><br>For more information on the OAuth client_id parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
      "propertyOrder" : 100,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "accountMapperClass" : {
      "title" : "Account Mapper",
      "description" : "Name of the class implementing the attribute mapping for the account search.<br><br>This class is used by the module to map from the account information received from the OAuth Identity Provider into OpenAM.<br/><br/>The class must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
      "propertyOrder" : 1000,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "smtpHostName" : {
      "title" : "SMTP host",
      "description" : "The mail host that will be used by the Email Gateway implementation",
      "propertyOrder" : 2300,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "mailGatewayClass" : {
      "title" : "Mail Server Gateway implementation class",
      "description" : "The class used by the module to send email.<br><br>This class is used by the module to send email. A custom implementation can be provided.<br/><br/>The custom implementation must implement the <code>org.forgerock.openam.authentication.modules.oauth2.EmailGateway</code>",
      "propertyOrder" : 2200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "scope" : {
      "title" : "Scope",
      "description" : "OAuth scope; list of user profile properties<br><br>According to the OAuth 2.0 Authorization Framework, scope is a space-separated list of user profile attributes that the client application requires. The list depends on the permissions that the resource owner grants to the client application.<br/><br/> Some authorization servers use non-standard separators for scopes. For example, Facebook takes a comma-separated list.<br/><br/> Default: <code>email, read_stream</code> (Facebook example)",
      "propertyOrder" : 600,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "authenticationEndpointUrl" : {
      "title" : "Authentication Endpoint URL",
      "description" : "OAuth authentication endpoint URL<br><br>This is the URL endpoint for OAuth authentication provided by the OAuth Identity Provider",
      "propertyOrder" : 300,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "mapToAnonymousUser" : {
      "title" : "Map to anonymous user",
      "description" : "Enabled anonymous user access to OpenAM for OAuth authenticated users<br><br>If selected, the authenticated users in the OAuth 2.0 Provider will be mapped to the anonymous user configured in the next parameter.<br/>If not selected the users authenticated will be mapped by the parameters configured in the account mapper.<br/><br/><i>NB </i>If <i>Create account if it does not exist</i> is enabled, that parameter takes precedence.",
      "propertyOrder" : 1800,
      "required" : true,
      "type" : "boolean",
      "exampleValue" : ""
    }
  }
}

{
  "type" : "object",
  "properties" : {
    "defaults" : {
      "properties" : {
        "authenticationEndpointUrl" : {
          "title" : "Authentication Endpoint URL",
          "description" : "OAuth authentication endpoint URL<br><br>This is the URL endpoint for OAuth authentication provided by the OAuth Identity Provider",
          "propertyOrder" : 300,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "clientSecret" : {
          "title" : "Client Secret",
          "description" : "OAuth client_secret parameter<br><br>For more information on the OAuth client_secret parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
          "propertyOrder" : 200,
          "required" : true,
          "type" : "string",
          "format" : "password",
          "exampleValue" : ""
        },
        "openidConnectContextType" : {
          "title" : "OpenID Connect validation configuration type",
          "description" : "Required when the 'openid' scope is included. Please select either 1. the issuer discovery url, 2. the issuer jwk url, or 3. the client_secret.",
          "propertyOrder" : 3000,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "oauth2EmailAttribute" : {
          "title" : "Email attribute in OAuth2 Response",
          "description" : "Attribute from the OAuth2 response used to send activation code emails.<br><br>The attribute in the response from the profile service in the OAuth 2.0 Provider that contains the email address of the authenticated user. This address will be used to send an email with an activation code when the accounts are allowed to be created dynamically.",
          "propertyOrder" : 1500,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "smtpFromAddress" : {
          "title" : "SMTP From address",
          "description" : "The email address on behalf of whom the messages will be sent",
          "propertyOrder" : 2800,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "userProfileServiceUrl" : {
          "title" : "User Profile Service URL",
          "description" : "User profile information URL<br><br>This URL endpoint provides user profile information and is provided by the OAuth Identity Provider<br/><br/><i>NB </i>This URL should return JSON objects in response",
          "propertyOrder" : 500,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "mapToAnonymousUser" : {
          "title" : "Map to anonymous user",
          "description" : "Enabled anonymous user access to OpenAM for OAuth authenticated users<br><br>If selected, the authenticated users in the OAuth 2.0 Provider will be mapped to the anonymous user configured in the next parameter.<br/>If not selected the users authenticated will be mapped by the parameters configured in the account mapper.<br/><br/><i>NB </i>If <i>Create account if it does not exist</i> is enabled, that parameter takes precedence.",
          "propertyOrder" : 1800,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        },
        "logoutBehaviour" : {
          "title" : "Logout options",
          "description" : "Controls how Logout options will be presented to the user.<br><br>The OAuth module has the following logout options for the user:<br/><br/><ul><li>Prompt: Prompt the user to logout from the OAuth 2.0 Provider</li><li>Logout: Logout from the OAuth 2.0 Provider and do not prompt</li><li>Do not logout: Do not logout the user from the OAuth 2.0 Provider and do not prompt</li></ul>",
          "propertyOrder" : 2100,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "smtpHostPort" : {
          "title" : "SMTP port",
          "description" : "The TCP port that will be used by the SMTP gateway",
          "propertyOrder" : 2400,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "accessTokenParameterName" : {
          "title" : "OAuth2 Access Token Profile Service Parameter name",
          "description" : "The name of the parameter that will contain the access token value when accessing the profile service",
          "propertyOrder" : 700,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "createAccount" : {
          "title" : "Create account if it does not exist",
          "description" : "If the OAuth2 account does not exist in the local OpenAM data store, an account will be created dynamically.<br><br>If this is enabled, the account mapper could create the account dynamically if there is no account mapped. Before creating the account, a dialog prompting for a password and asking for an activation code can be shown if the parameter \"Prompt for password setting and activation code\" is enabled.<br /><br />If this flag is not enabled, 3 alternative options exist:<br/><br/><ol><li>The accounts need to have a user profile in the OpenAM User Data Store</li><li>The user does not have a user profile and the \"Ignore Profile\" is set in the Authentication Service of the realm.</li><li>The account is mapped to an anonymous account (see parameter \"Map to anonymous user\" and \"Anonymous User\")</li></ol>",
          "propertyOrder" : 1600,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        },
        "smtpHostName" : {
          "title" : "SMTP host",
          "description" : "The mail host that will be used by the Email Gateway implementation",
          "propertyOrder" : 2300,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "smtpSslEnabled" : {
          "title" : "SMTP SSL Enabled",
          "description" : "Tick this option if the SMTP Server provides SSL",
          "propertyOrder" : 2700,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        },
        "scope" : {
          "title" : "Scope",
          "description" : "OAuth scope; list of user profile properties<br><br>According to the OAuth 2.0 Authorization Framework, scope is a space-separated list of user profile attributes that the client application requires. The list depends on the permissions that the resource owner grants to the client application.<br/><br/> Some authorization servers use non-standard separators for scopes. For example, Facebook takes a comma-separated list.<br/><br/> Default: <code>email, read_stream</code> (Facebook example)",
          "propertyOrder" : 600,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "clientId" : {
          "title" : "Client Id",
          "description" : "OAuth client_id parameter<br><br>For more information on the OAuth client_id parameter refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-2.3.1\" target=\"_blank\">RFC 6749</a>, section 2.3.1",
          "propertyOrder" : 100,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "authenticationLevel" : {
          "title" : "Authentication Level",
          "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
          "propertyOrder" : 2900,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "openidConnectContextValue" : {
          "title" : "OpenID Connect validation configuration value",
          "description" : "Required when the 'openid' scope is included. The discovery url, or jwk url, or the client_secret, corresponding to the selection above.<br><br>If discovery or jwk url entered, entry must be in valid url format, <br/>e.g. https://accounts.google.com/.well-known/openid-configuration<br/><i>NB </i>If client_secret entered, entry is ignored and the value of the Client Secret is used.",
          "propertyOrder" : 3100,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "mixUpMitigation" : {
          "title" : "OAuth 2.0 Mix-Up Mitigation enabled",
          "description" : "Enables OAuth 2.0 mix-up mitigation<br><br>The authorization server must support the <a href=\"https://tools.ietf.org/html/draft-ietf-oauth-mix-up-mitigation-01#section-3.1\">OAuth 2.0 Mix-Up Mitigation draft</a>, otherwise OpenAM will fail to validate responses from the authorization server. If only the OAuth 2.0 protocol is utilized, make sure that the accepted issuer value is set in the \"Token Issuer\" setting.",
          "propertyOrder" : 3300,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        },
        "ssoProxyUrl" : {
          "title" : "Proxy URL",
          "description" : "The URL to the OpenAM OAuth proxy JSP<br><br>This URL should only be changed from the default, if an external server is performing the GET to POST proxying. The default is <code>/openam/oauth2c/OAuthProxy.jsp</code>",
          "propertyOrder" : 800,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "accountProviderClass" : {
          "title" : "Account Provider",
          "description" : "Name of the class implementing the account provider.<br><br>This class is used by the module to find the account from the attributes mapped by the Account Mapper <code>org.forgerock.openam.authentication.modules.common.mapping.AccountProvider</code> interface.<br/>String constructor parameters can be provided by appending <code>|</code> separated values.",
          "propertyOrder" : 900,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "smtpPassword" : {
          "title" : "SMTP User Password",
          "description" : "The Password of the SMTP User Name",
          "propertyOrder" : 2600,
          "required" : true,
          "type" : "string",
          "format" : "password",
          "exampleValue" : ""
        },
        "accountMapperClass" : {
          "title" : "Account Mapper",
          "description" : "Name of the class implementing the attribute mapping for the account search.<br><br>This class is used by the module to map from the account information received from the OAuth Identity Provider into OpenAM.<br/><br/>The class must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
          "propertyOrder" : 1000,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "oauth2LogoutServiceUrl" : {
          "title" : "OAuth 2.0 Provider logout service",
          "description" : "The URL of the OAuth Identity Providers Logout service<br><br>OAuth 2.0 Identity Providers can have a logout service. If this logout functionality is required then the URL of the Logout endpoint should configured here.",
          "propertyOrder" : 2000,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "saveAttributesInSession" : {
          "title" : "Save attributes in the session",
          "description" : "If this option is enabled, the attributes configured in the attribute mapper will be saved into the OpenAM session",
          "propertyOrder" : 1400,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        },
        "smtpUsername" : {
          "title" : "SMTP User Name",
          "description" : "If the SMTP Service requires authentication, configure the user name here",
          "propertyOrder" : 2500,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "mailGatewayClass" : {
          "title" : "Mail Server Gateway implementation class",
          "description" : "The class used by the module to send email.<br><br>This class is used by the module to send email. A custom implementation can be provided.<br/><br/>The custom implementation must implement the <code>org.forgerock.openam.authentication.modules.oauth2.EmailGateway</code>",
          "propertyOrder" : 2200,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "accountMapperConfiguration" : {
          "title" : "Account Mapper Configuration",
          "description" : "Mapping of OAuth account to local OpenAM account<br><br>Attribute configuration that will be used to map the account of the user authenticated in the OAuth 2.0 Provider to the local data store in the OpenAM. Example: <code>OAuth2.0_attribute=local_attribute</code>",
          "propertyOrder" : 1100,
          "required" : true,
          "items" : {
            "type" : "string"
          },
          "type" : "array",
          "exampleValue" : ""
        },
        "anonymousUserName" : {
          "title" : "Anonymous User",
          "description" : "Username of the OpenAM anonymous user<br><br>The username of the user that will represent the anonymous user. This user account must already exist in the realm.",
          "propertyOrder" : 1900,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "openidConnectIssuer" : {
          "title" : "Token Issuer",
          "description" : "Required when the 'openid' scope is included. Value must match the iss field in issued ID Token<br/>e.g. accounts.google.com<br><br>The issuer value MUST be provided when OAuth 2.0 Mix-Up Mitigation is enabled.",
          "propertyOrder" : 3200,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "attributeMapperConfiguration" : {
          "title" : "Attribute Mapper Configuration",
          "description" : "Mapping of OAuth attributes to local OpenAM attributes<br><br>Attribute configuration that will be used to map the user info obtained from the OAuth 2.0 Provider to the local user data store in the OpenAM.<br/><br/>Example: <code>OAuth2.0_attribute=local_attribute</code>",
          "propertyOrder" : 1300,
          "required" : true,
          "items" : {
            "type" : "string"
          },
          "type" : "array",
          "exampleValue" : ""
        },
        "accessTokenEndpointUrl" : {
          "title" : "Access Token Endpoint URL",
          "description" : "OAuth access token endpoint URL<br><br>This is the URL endpoint for access token retrieval provided by the OAuth Identity Provider. Refer to the <a href=\"http://tools.ietf.org/html/rfc6749#section-3.2\" target=\"_blank\">RFC 6749</a>, section 3.2",
          "propertyOrder" : 400,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "attributeMappingClasses" : {
          "title" : "Attribute Mapper",
          "description" : "Name of the class that implements the attribute mapping<br><br>This class maps the OAuth properties into OpenAM properties. A custom attribute mapper can be provided.<br/><br/>A custom attribute mapper must implement the <code>org.forgerock.openam.authentication.modules.common.mapping.AttributeMapper</code> interface.<br/>Provided implementations are:<ul><li>org.forgerock.openam.authentication.modules.common.mapping.JsonAttributeMapper</li><li>org.forgerock.openam.authentication.modules.oidc.JwtAttributeMapper (can only be used when using the openid scope)</li></ul>String constructor parameters can be provided by appending <code>|</code> separated values.",
          "propertyOrder" : 1200,
          "required" : true,
          "items" : {
            "type" : "string"
          },
          "type" : "array",
          "exampleValue" : ""
        },
        "promptForPassword" : {
          "title" : "Prompt for password setting and activation code",
          "description" : "Users must set a password and complete the activation flow during dynamic profile creation.<br><br>If this is enabled, the user must set a password before the system creates an account dynamically and an activation code will be sent to the user's email address. The account will be created only if the password and activation code are properly set. <br />If this is disabled, the account will be created transparently without prompting the user.",
          "propertyOrder" : 1700,
          "required" : true,
          "type" : "boolean",
          "exampleValue" : ""
        }
      },
      "type" : "object",
      "title" : "Realm Defaults"
    }
  }
}