AuthenticatorOathModule

{
  "type" : "object",
  "properties" : {
    "oathIssuerName" : {
      "title" : "Name of the Issuer",
      "description" : "Name to identify the OTP issuer.",
      "propertyOrder" : 1100,
      "required" : true,
      "type" : "string",
      "exampleValue" : "ForgeRock"
    },
    "totpTimeStepInterval" : {
      "title" : "TOTP Time Step Interval",
      "description" : "The TOTP time step in seconds that the OTP device uses to generate the OTP.<br><br>This is the time interval that one OTP is valid for. For example, if the time step is 30 seconds, then a new OTP will be generated every 30 seconds. This makes a single OTP valid for only 30 seconds.",
      "propertyOrder" : 800,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "truncationOffset" : {
      "title" : "Truncation Offset",
      "description" : "This adds an offset to the generation of the OTP.<br><br>This is an option used by the HOTP algorithm that not all devices support. This should be left default unless you know your device uses a offset.",
      "propertyOrder" : 700,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "frOathOtpMaxRetry" : {
      "title" : "One Time Password Max Retry",
      "description" : "The number of times entry of the OTP may be attempted. Minimum is 1 maximum is 10 and default is 3.",
      "propertyOrder" : null,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "minimumSecretKeyLength" : {
      "title" : "Minimum Secret Key Length",
      "description" : "Number of hexadecimal characters allowed for the Secret Key.",
      "propertyOrder" : 300,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "hotpWindowSize" : {
      "title" : "HOTP Window Size",
      "description" : "The size of the window to resynchronize with the client.<br><br>This sets the window that the OTP device and the server counter can be out of sync. For example, if the window size is 100 and the servers last successful login was at counter value 2, then the server will accept a OTP from the OTP device that is from device counter 3 to 102.",
      "propertyOrder" : 500,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "addChecksumToOtpEnabled" : {
      "title" : "Add Checksum Digit",
      "description" : "This adds a checksum digit to the OTP.<br><br>This adds a digit to the end of the OTP generated to be used as a checksum to verify the OTP was generated correctly. This is in addition to the actual password length. You should only set this if your device supports it.",
      "propertyOrder" : 600,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oathAlgorithm" : {
      "title" : "OATH Algorithm to Use",
      "description" : "Choose the algorithm your device uses to generate the OTP.<br><br>HOTP uses a counter value that is incremented every time a new OTP is generated. TOTP generates a new OTP every few seconds as specified by the time step interval.",
      "propertyOrder" : 400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "totpTimeStepsInWindow" : {
      "title" : "TOTP Time Steps",
      "description" : "The number of time steps to check before and after receiving a OTP.<br><br>This is the number of time step intervals to check the received OTP against both forward in time and back in time. For example, with 1 time steps and a time step interval of 30 seconds the server will allow a code between the previous code, the current code and the next code.",
      "propertyOrder" : 900,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "passwordLength" : {
      "title" : "One Time Password Length ",
      "description" : "The length of the generated OTP in digits, must be at least 6 and compatible with the hardware/software OTP generators you expect your end-users to use. For example, Google and ForgeRock authenticators support values of 6 and 8.",
      "propertyOrder" : 200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "totpMaximumClockDrift" : {
      "title" : "Maximum Allowed Clock Drift",
      "description" : "Number of time steps a client is allowed to get out of sync with the server before manual resynchronisation is required. For example, with 3 allowed drifts and a time step interval of 30 seconds the server will allow codes from up to 90 seconds from the current time to be treated as the current time step. The drift for a user's device is calculated each time they enter a new code. If the drift exceeds this value, the user's authentication code will be rejected.",
      "propertyOrder" : 1000,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "authenticationLevel" : {
      "title" : "Authentication Level",
      "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
      "propertyOrder" : 100,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    }
  }
}

{
  "type" : "object",
  "properties" : {
    "oathIssuerName" : {
      "title" : "Name of the Issuer",
      "description" : "Name to identify the OTP issuer.",
      "propertyOrder" : 1100,
      "required" : true,
      "type" : "string",
      "exampleValue" : "ForgeRock"
    },
    "totpTimeStepInterval" : {
      "title" : "TOTP Time Step Interval",
      "description" : "The TOTP time step in seconds that the OTP device uses to generate the OTP.<br><br>This is the time interval that one OTP is valid for. For example, if the time step is 30 seconds, then a new OTP will be generated every 30 seconds. This makes a single OTP valid for only 30 seconds.",
      "propertyOrder" : 800,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "truncationOffset" : {
      "title" : "Truncation Offset",
      "description" : "This adds an offset to the generation of the OTP.<br><br>This is an option used by the HOTP algorithm that not all devices support. This should be left default unless you know your device uses a offset.",
      "propertyOrder" : 700,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "frOathOtpMaxRetry" : {
      "title" : "One Time Password Max Retry",
      "description" : "The number of times entry of the OTP may be attempted. Minimum is 1 maximum is 10 and default is 3.",
      "propertyOrder" : null,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "minimumSecretKeyLength" : {
      "title" : "Minimum Secret Key Length",
      "description" : "Number of hexadecimal characters allowed for the Secret Key.",
      "propertyOrder" : 300,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "hotpWindowSize" : {
      "title" : "HOTP Window Size",
      "description" : "The size of the window to resynchronize with the client.<br><br>This sets the window that the OTP device and the server counter can be out of sync. For example, if the window size is 100 and the servers last successful login was at counter value 2, then the server will accept a OTP from the OTP device that is from device counter 3 to 102.",
      "propertyOrder" : 500,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "addChecksumToOtpEnabled" : {
      "title" : "Add Checksum Digit",
      "description" : "This adds a checksum digit to the OTP.<br><br>This adds a digit to the end of the OTP generated to be used as a checksum to verify the OTP was generated correctly. This is in addition to the actual password length. You should only set this if your device supports it.",
      "propertyOrder" : 600,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "oathAlgorithm" : {
      "title" : "OATH Algorithm to Use",
      "description" : "Choose the algorithm your device uses to generate the OTP.<br><br>HOTP uses a counter value that is incremented every time a new OTP is generated. TOTP generates a new OTP every few seconds as specified by the time step interval.",
      "propertyOrder" : 400,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "totpTimeStepsInWindow" : {
      "title" : "TOTP Time Steps",
      "description" : "The number of time steps to check before and after receiving a OTP.<br><br>This is the number of time step intervals to check the received OTP against both forward in time and back in time. For example, with 1 time steps and a time step interval of 30 seconds the server will allow a code between the previous code, the current code and the next code.",
      "propertyOrder" : 900,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "passwordLength" : {
      "title" : "One Time Password Length ",
      "description" : "The length of the generated OTP in digits, must be at least 6 and compatible with the hardware/software OTP generators you expect your end-users to use. For example, Google and ForgeRock authenticators support values of 6 and 8.",
      "propertyOrder" : 200,
      "required" : true,
      "type" : "string",
      "exampleValue" : ""
    },
    "totpMaximumClockDrift" : {
      "title" : "Maximum Allowed Clock Drift",
      "description" : "Number of time steps a client is allowed to get out of sync with the server before manual resynchronisation is required. For example, with 3 allowed drifts and a time step interval of 30 seconds the server will allow codes from up to 90 seconds from the current time to be treated as the current time step. The drift for a user's device is calculated each time they enter a new code. If the drift exceeds this value, the user's authentication code will be rejected.",
      "propertyOrder" : 1000,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    },
    "authenticationLevel" : {
      "title" : "Authentication Level",
      "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
      "propertyOrder" : 100,
      "required" : true,
      "type" : "integer",
      "exampleValue" : ""
    }
  }
}

{
  "type" : "object",
  "properties" : {
    "defaults" : {
      "properties" : {
        "totpTimeStepsInWindow" : {
          "title" : "TOTP Time Steps",
          "description" : "The number of time steps to check before and after receiving a OTP.<br><br>This is the number of time step intervals to check the received OTP against both forward in time and back in time. For example, with 1 time steps and a time step interval of 30 seconds the server will allow a code between the previous code, the current code and the next code.",
          "propertyOrder" : 900,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "frOathOtpMaxRetry" : {
          "title" : "One Time Password Max Retry",
          "description" : "The number of times entry of the OTP may be attempted. Minimum is 1 maximum is 10 and default is 3.",
          "propertyOrder" : null,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "passwordLength" : {
          "title" : "One Time Password Length ",
          "description" : "The length of the generated OTP in digits, must be at least 6 and compatible with the hardware/software OTP generators you expect your end-users to use. For example, Google and ForgeRock authenticators support values of 6 and 8.",
          "propertyOrder" : 200,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "totpMaximumClockDrift" : {
          "title" : "Maximum Allowed Clock Drift",
          "description" : "Number of time steps a client is allowed to get out of sync with the server before manual resynchronisation is required. For example, with 3 allowed drifts and a time step interval of 30 seconds the server will allow codes from up to 90 seconds from the current time to be treated as the current time step. The drift for a user's device is calculated each time they enter a new code. If the drift exceeds this value, the user's authentication code will be rejected.",
          "propertyOrder" : 1000,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "hotpWindowSize" : {
          "title" : "HOTP Window Size",
          "description" : "The size of the window to resynchronize with the client.<br><br>This sets the window that the OTP device and the server counter can be out of sync. For example, if the window size is 100 and the servers last successful login was at counter value 2, then the server will accept a OTP from the OTP device that is from device counter 3 to 102.",
          "propertyOrder" : 500,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "totpTimeStepInterval" : {
          "title" : "TOTP Time Step Interval",
          "description" : "The TOTP time step in seconds that the OTP device uses to generate the OTP.<br><br>This is the time interval that one OTP is valid for. For example, if the time step is 30 seconds, then a new OTP will be generated every 30 seconds. This makes a single OTP valid for only 30 seconds.",
          "propertyOrder" : 800,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "oathIssuerName" : {
          "title" : "Name of the Issuer",
          "description" : "Name to identify the OTP issuer.",
          "propertyOrder" : 1100,
          "required" : true,
          "type" : "string",
          "exampleValue" : "ForgeRock"
        },
        "oathAlgorithm" : {
          "title" : "OATH Algorithm to Use",
          "description" : "Choose the algorithm your device uses to generate the OTP.<br><br>HOTP uses a counter value that is incremented every time a new OTP is generated. TOTP generates a new OTP every few seconds as specified by the time step interval.",
          "propertyOrder" : 400,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "addChecksumToOtpEnabled" : {
          "title" : "Add Checksum Digit",
          "description" : "This adds a checksum digit to the OTP.<br><br>This adds a digit to the end of the OTP generated to be used as a checksum to verify the OTP was generated correctly. This is in addition to the actual password length. You should only set this if your device supports it.",
          "propertyOrder" : 600,
          "required" : true,
          "type" : "string",
          "exampleValue" : ""
        },
        "authenticationLevel" : {
          "title" : "Authentication Level",
          "description" : "The authentication level associated with this module.<br><br>Each authentication module has an authentication level that can be used to indicate the level of security associated with the module; 0 is the lowest (and the default).",
          "propertyOrder" : 100,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "minimumSecretKeyLength" : {
          "title" : "Minimum Secret Key Length",
          "description" : "Number of hexadecimal characters allowed for the Secret Key.",
          "propertyOrder" : 300,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        },
        "truncationOffset" : {
          "title" : "Truncation Offset",
          "description" : "This adds an offset to the generation of the OTP.<br><br>This is an option used by the HOTP algorithm that not all devices support. This should be left default unless you know your device uses a offset.",
          "propertyOrder" : 700,
          "required" : true,
          "type" : "integer",
          "exampleValue" : ""
        }
      },
      "type" : "object",
      "title" : "Realm Defaults"
    }
  }
}