IG 2023.9

Prepare to install

Requirements

Make sure your installation meets the requirements in the release notes.

Create an IG service account

To limit the impact of a security breach, install and run IG from a dedicated service account. This is optional when you are evaluating IG, but essential in production installations.

A hacker is constrained by the rights granted to the user account where IG runs; therefore, never run IG as root user.

  1. In a terminal window, use a command similar to the following to create a service account:

    • Linux

    • Windows

    $ sudo /usr/sbin/useradd \
--create-home \
--comment "Account for running IG" \
--shell /bin/bash IG
    > net user username password /add /comment:"Account for running IG"

  2. Apply the principle of least privilege to the account, for example:

    • Read/write permissions on the installation directory, /path/to/identity-gateway.

    • Execute permissions on the scripts in the installation bin directory, /path/to/identity-gateway/bin.

Prepare the network

Configure the network to include the hosts.

  1. Add the following additional entry to your host file:

    • Linux

    • Windows

    /etc/hosts
    %SystemRoot%\system32\drivers\etc\hosts
    127.0.0.1  localhost ig.example.com app.example.com am.example.com

    For more information about host files, refer to the Wikipedia entry, Hosts (file).

Set up Identity Cloud and AM for use with IG

This section contains procedures for setting up items in ForgeRock Identity Cloud and AM that you can use with IG. For more information about setting up Identity Cloud, refer to the ForgeRock Identity Cloud docs. For more information about setting up AM, refer to the Access Management docs.

Authenticate an IG agent to Identity Cloud

IG agents are automatically authenticated to Identity Cloud by a non-configurable authentication module. Authentication chains and modules are deprecated in Identity Cloud and replaced by journeys.

You can now authenticate IG agents to Identity Cloud with a journey. The procedure is currently optional, but will be required when authentication chains and modules are removed in a future release of Identity Cloud.

For more information, refer to Identity Cloud’s Journeys.

This section describes how to create a journey to authenticate an IG agent to Identity Cloud. The journey has the following requirements:

  • It must be called Agent

  • Its nodes must pass the agent credentials to the Agent Data Store Decision node.

When you define a journey in Identity Cloud, that same journey is used for all instances of IG, Java agent, and Web agent. Consider this point if you change the journey configuration.

  1. Log in to the Identity Cloud admin UI as an administrator.

  2. Click Journeys > New Journey.

  3. Add a journey with the following information and click Create journey:

    • Name: Agent

    • Identity Object: The user or device to authenticate.

    • (Optional) Description: Authenticate an IG agent to Identity Cloud

    The journey designer is displayed, with the Start entry point connected to the Failure exit point, and a Success node.

  4. Using the Filter nodes bar, find and then drag the following nodes from the Components panel into the designer area:

    • Zero Page Login Collector node to check whether the agent credentials are provided in the incoming authentication request, and use their values in the following nodes.

      This node is required for compatibility with Java agent and Web agent.

    • Page node to collect the agent credentials if they are not provided in the incoming authentication request, and use their values in the following nodes.

    • Agent Data Store Decision node to verify the agent credentials match the registered IG agent profile.

    Many nodes can be configured in the panel on the right side of the page. Unless otherwise stated, do not configure the nodes, and use only the default values.

  5. Drag the following nodes from the Components panel into the Page node:

  6. Connect the nodes as follows and save the journey:

    A journey that can be used to authenticate an agent to Identity Cloud.

Authenticate an IG agent to AM

From AM 7.3

When AM 7.3 is installed with a default configuration, as described in Evaluation, IG is automatically authenticated to AM by an authentication tree. Otherwise, IG is authenticated to AM by an AM authentication module.

Authentication chains and modules were deprecated in AM 7. When they are removed in a future release of AM, it will be necessary to configure an appropriate authentication tree when you are not using the default configuration.

For more information, refer to AM’s Authentication Nodes and Trees.

This section describes how to create an authentication tree to authenticate an IG agent to AM. The tree has the following requirements:

  • It must be called Agent

  • Its nodes must pass the agent credentials to the Agent Data Store Decision node.

When you define a tree in AM, that same tree is used for all instances of IG, Java agent, and Web agent. Consider this point if you change the tree configuration.

  1. On the Realms page of the AM admin UI, choose the realm in which to create the authentication tree.

  2. On the Realm Overview page, click Authentication > Trees > Create tree.

  3. Create a tree named Agent.

    The authentication tree designer is displayed, with the Start entry point connected to the Failure exit point, and a Success node.

    The authentication tree designer provides the following features on the toolbar:

    Button Usage
    Trees auto layout

    Lay out and align nodes according to the order they are connected.
    Trees full screen

    Toggle the designer window between normal and full-screen layout.
    Trees delete node

    Remove the selected node. Note that the Start entry point cannot be deleted.

  4. Using the Filter bar, find and then drag the following nodes from the Components panel into the designer area:

    • Zero Page Login Collector node to check whether the agent credentials are provided in the incoming authentication request, and use their values in the following nodes.

      This node is required for compatibility with Java agent and Web agent.

    • Page node to collect the agent credentials if they are not provided in the incoming authentication request, and use their values in the following nodes.

    • Agent Data Store Decision node to verify the agent credentials match the registered IG agent profile.

    Many nodes can be configured in the panel on the right side of the page. Unless otherwise stated, do not configure the nodes and use only the default values.

  5. Drag the following nodes from the Components panel into the Page node:

    • Username Collector node to prompt the user to enter their username.

    • Password Collector node to prompt the user to enter their password.

  6. Connect the nodes as follows and save the tree:

    A tree that can be used to authenticate an agent to AM.

Register an IG agent in Identity Cloud

This procedure registers an agent that acts on behalf of IG.

  1. Log in to the Identity Cloud admin UI as an administrator.

  2. Click verified_user Gateways & Agents > New Gateway/Agent > Identity Gateway > Next, and add an agent profile:

    • ID: agent-name

    • Password: agent-password

      Use secure passwords in a production environment. Consider using a password manager to generate secure passwords.

  3. Click Save Profile > Done. The agent profile page is displayed.

  4. To add a redirect URL for CDSSO, go to the agent profile page and add the URL.

  5. To change the introspection scope, click open_in_new Native Consoles > Access Management, and update the agent in the AM admin UI. By default, the agent can introspect OAuth 2.0 tokens issued to any client, in the realm and subrealm where it is created.

  6. To direct login to a custom URL instead of the default AM login page, click open_in_new Native Consoles > Access Management. Select the agent in the AM admin UI and configure Login URL Template for CDSSO.

Register an IG agent in AM 7 and later

In AM 7 and later versions, follow these steps to register an agent that acts on behalf of IG.

  1. In the AM admin UI, select the top-level realm, and then select Applications > Agents > Identity Gateway.

  2. Add an agent with the following configuration, leaving other options blank or with the default value:

    • For SSO

    • For CDSSO

    • Agent ID : ig_agent

    • Password : password

    • Agent ID : ig_agent

    • Password : password

    • Redirect URL for CDSSO : https://ig.ext.com:8443/home/cdsso/redirect

    • Login URL Template for CDSSO: Configure this property to direct login to a custom URL instead of the default AM login page.

Register an IG agent in AM 6.5 and earlier

In AM 6.5 and earlier versions, follow these steps to register an agent that acts on behalf of IG.

  1. In the AM admin UI, select the top-level realm, and then select Applications > Agents > Java (or J2EE ).

  2. Add an agent with the following configuration, leaving other options blank or with the default value:

    • For SSO

    • For CDSSO

    • Agent ID : ig_agent

    • Agent URL : http://ig.example.com:8080/agentapp

    • Server URL : http://am.example.com:8088/openam

    • Password : password

    • Agent ID : ig_agent_cdsso

    • Agent URL : http://ig.ext.com:8080/agentapp

    • Server URL : http://am.example.com:8088/openam

    • Password : password

    • Login URL Template for CDSSO: Configure this property to direct login to a custom URL instead of the default AM login page.

  3. On the Global tab, deselect Agent Configuration Change Notification.

    This option stops IG from being notified about agent configuration changes in AM. IG doesn’t need these notifications.

  4. (For CDSSO) On the SSO tab, select the following values:

    • Cross Domain SSO : Deselect this option

    • CDSSO Redirect URI : /home/cdsso/redirect

  5. (For CDSSO and policy enforcement) On the SSO tab, select the following values:

    • Cross Domain SSO : Deselect this option

    • CDSSO Redirect URI : /home/pep-cdsso/redirect

Set up a demo user in Identity Cloud

This procedure sets up a demo user in the alpha realm.

  1. Log in to the Identity Cloud admin UI as an administrator.

  2. Go to group Identities > Manage > settings_system_daydream Alpha realm - Users, and add a user with the following values:

    • Username: demo

    • First name: demo

    • Last name: user

    • Email Address: demo@example.com

    • Password: Ch4ng3!t

Set up a demo user in AM

AM is provided with a demo user in the top-level realm, with the following credentials:

  • ID/username: demo

  • Last name: user

  • Password: Ch4ng31t

  • Email address: demo@example.com

  • Employee number: 123

For information about how to manage identities in AM, refer to AM’s Identity stores.

In routes that use AmService, IG retrieves AM’s SSO cookie name from the ssoTokenHeader property or from AM’s /serverinfo/* endpoint.

In other circumstances where you need to find the SSO cookie name, access http://am-base-url/serverinfo/*. For example, access the AM endpoint with curl:

$ curl http://am.example.com:8088/openam/json/serverinfo/*
Copyright © 2010-2023 ForgeRock, all rights reserved.