Transactional Authorization

Perform the following steps to set up an authorization policy with a transaction environment condition, which requires users to respond to a push notification message on their registered mobile device to authorize access to a protected resource.

1. Add a ForgeRock Authenticator (Push) authentication module:

   1. Log in as an AM administrator. For example, amAdmin.

   2. Navigate to Realms > Top Level Realm > Authentication > Modules, and then select Add Module.

   3. On the New Module page, name the module pushAuth, select ForgeRock Authenticator (Push) as the module type, and then select Create.

   4. (Optional) Alter the Login Message. For example:

      Authorize {{user}} at {{issuer}}?

   5. Select Save Changes

2. Add the module to an authentication chain:

   1. Navigate to Realms > Top Level Realm > Authentication > Chains, and then select Add Chain.

   2. On the Add Chain page, name the chain pushAuthChain, and then select Create.

   3. On the Edit Chain tab, select Add a Module.

   4. On the New Module dialog box, from the Select Module drop-down list, select the push module you created in the earlier step; for example, pushAuth, from the Select Criteria drop-down list, select Required, and then select OK.

   5. On the Edit Chain tab, select Save Changes.

3. Create an authorization policy as described in Configuring Policies

   Note

   Ensure that there are not multiple policies which match the protected resource that is being authorized. If multiple policies have a matching subject or environment conditions with the protected resource, it may be incorrectly authorized.

   Make the following changes to the policy:

   1. Navigate to Realms > Top Level Realm > Authorization > Policy Sets, and then select Default Policy Set.

   2. On the Default Policy Set page, select Authenticated users can get Apache HTTP home page.

   3. On the Environments tab, select Add an Environment Condition, and then select Transaction.

   4. From the Authentication Strategy drop-down list, select Authenticate to Chain.

   5. In the Strategy Specifier field, enter the name of the push authorization chain created earlier, for example, pushAuthChain.

      Note

      The value entered must exactly match the name of the chain. The value is not validated by the UI, and an incorrect value will cause the authorization to fail.

   6. Select the checkmark icon, and then select Save Changes.

      The resulting policy will resemble the following image:
      Transaction Environment Condition in a Policy

      

      
      

4. Choose one of the following options to demo transactional authorization:

   • To use the AM console for the demonstration, proceed to the steps outlined in "To Perform Transactional Authorization with the AM Console".

   • To use the AM REST API for the demonstration, proceed to the steps outlined in "To Perform Transactional Authorization with the AM REST API".

1. In a web browser, navigate to a URL that is protected by the policy you edited in "To Prepare AM for Transactional Authorization with Push Notifications", such as http://www.example.com:8000/index.html.

   The web agent will redirect the browser to the AM login screen.

2. Log in to AM as user demo with password Ch4ng31t.

   AM will display the authenticator push page:

   

   The mobile device that was registered to the demo user will receive a push notification message:

   

3. On the registered mobile device, tap the notification.

   The ForgeRock Authenticator app will open. Swipe the switch to authorize the access attempt.

   

   After authorizing the request in the ForgeRock Authenticator app, the authenticator push page in the web browser redirects to the requested resource, completing the transactional authorization.

   Note that refreshing the protected page in the web browser at this point starts a new transactional authorization flow, and send a new push notification.

1. Obtain a session token from AM for user demo with password Ch4ng31t:

   $ curl \
   --request POST \
   --header "Content-Type: application/json" \
   --header "X-OpenAM-Username: demo" \
   --header "X-OpenAM-Password: Ch4ng31t" \
   --header "Accept-API-Version: resource=2.0, protocol=1.0" \
   'https://openam.example.com:8443/openam/json/realms/root/authenticate'
   {
       "tokenId":"AQIC5wM...TU3OQ*",
       "successUrl":"/openam/console",
       "realm":"/"
   }

2. Request a policy evaluation with the tokenId from the previous step as the subject, and a resource URL that is protected by the policy you edited in "To Prepare AM for Transactional Authorization with Push Notifications", such as http://www.example.com:8000/index.html.

   Note

   The request requires authentication as a user with the privileges to access the policy endpoints, for example by specifying the SSO token ID in the iPlanetDirectoryPro cookie. See Authenticating (REST).

   $ curl \
   --cookie "iPlanetDirectoryPro=AQIC5wM2L...zEAAA..*" \" \
   --request POST \
   --header "Content-Type: application/json" \
   --header "Accept-API-Version: resource=2.0" \
   --data '{
       "resources" : ["http://www.example.com:8000/index.html"],
       "subject" : {
           "ssoToken" : "AQIC5w...NTcy*"
       },
       "application": "iPlanetAMWebAgentService"
   }' \
   https://openam.example.com:8443/openam/json/policies/?_action=evaluate
   {
      "resource": "http://www.example.com:8000/index.html",
      "actions": {},
      "attributes": {},
      "advices": {
          "TransactionConditionAdvice": [
              "9dae2c80-fe7a-4a36-b57b-4fb1271b0687"
          ]
      },
      "ttl": 0
   }

   Tip

   Enter the name of your policy set in the application parameter if you are not creating policies in the default, iPlanetAMWebAgentService.

   AM returns an empty actions element, and a transaction ID in the TransactionConditionAdvice property, because a transactional authorization is required to access the resource.

3. Initiate authentication, and include the transaction ID in the composite advice. Note that the steps used for performing a transactional authorization are identical to performing a session upgrade. See Session Upgrade.

   The transaction ID returned in the previous step must be returned as composite advice query parameters, wrapped in URL-encoded XML. The XML format is as follows:

   <Advices>
       <AttributeValuePair>
           <Attribute name="TransactionConditionAdvice"/>
           <Value>Transaction Id</Value>
       </AttributeValuePair>
   </Advices>
   

   Use the SSO token of the demo user for this request.

   Note that the following curl command URL-encodes the XML values, and the -G parameter appends them as query string parameters to the URL:

   $ curl -get \
   --cookie "iPlanetDirectoryPro=AQIC5w...NTcy*" \" \
   --request POST \
   --header "Content-Type: application/json" \
   --header "Accept-API-Version: resource=2.0, protocol=1.0" \
   --data-urlencode 'authIndexType=composite_advice' \
   --data-urlencode 'authIndexValue=<Advices>
       <AttributeValuePair>
           <Attribute name="TransactionConditionAdvice"/>
           <Value>9dae2c80-fe7a-4a36-b57b-4fb1271b0687</Value>
       </AttributeValuePair>
   </Advices>' \
   'https://openam.example.com:8443/openam/json/realms/root/authenticate'
   {
       "authId": "eyJ0eXAiOi...WLxJ-1d6ovYKHQ",
       "template": "",
       "stage": "AuthenticatorPush3",
       "header": "Authenticator Push",
       "callbacks": [
           {
               "type": "PollingWaitCallback",
               "output": [
                   {
                       "name": "waitTime",
                       "value": "10000"
                   }
               ]
           },
           {
               "type": "ConfirmationCallback",
               "output": [
                   {
                       "name": "prompt",
                       "value": ""
                   },
                   {
                       "name": "messageType",
                       "value": 0
                   },
                   {
                       "name": "options",
                       "value": [
                           "Use Emergency Code"
                       ]
                   },
                   {
                       "name": "optionType",
                       "value": -1
                   },
                   {
                       "name": "defaultOption",
                       "value": 0
                   }
               ],
               "input": [
                   {
                       "name": "IDToken2",
                       "value": 100
                   }
               ]
           }
       ]
   }

   At this point, the mobile device that was registered to the demo user will receive a push notification message, that they should authorize in the ForgeRock Authenticator app.

4. Ensure that the time specified in the waitTime property in the callbacks has passed, in this case at least 10 seconds, and then complete and return the requested callbacks.

   The value of the authId property must also be returned, as well as the URL-encoded transaction ID.

   Use the SSO token of the demo user for this request.

   Note

   In this example, the required XML parameters have been URL-encoded and added to the URL. The curl command is not able to use the --data-urlencode option for query-string parameters and also send a JSON payload.

   $ curl \
   --cookie "iPlanetDirectoryPro=AQIC5w...NTcy*" \" \
   --request POST \
   --header "Content-Type: application/json" \
   --header "Accept-API-Version: resource=2.0, protocol=1.0" \
   --data '{
       "authId":"eyJ0eXAiOi...WLxJ-1d6ovYKHQ",
       "template":"",
       "stage":"AuthenticatorPush3",
       "header":"Authenticator Push",
       "callbacks":[
           {
               "type":"PollingWaitCallback",
               "output":[
                   {
                       "name":"waitTime",
                       "value":"10000"
                   }
               ]
           },
           {
               "type":"ConfirmationCallback",
               "output":[
                   {
                       "name":"prompt",
                       "value":""
                   },
                   {
                       "name":"messageType",
                       "value":0
                   },
                   {
                       "name":"options",
                       "value":[
                           "Use Emergency Code"
                       ]
                   },
                   {
                       "name":"optionType",
                       "value":-1
                   },
                   {
                       "name":"defaultOption",
                       "value":0
                   }
               ],
               "input":[
                   {
                       "name":"IDToken2",
                       "value":100
                   }
               ]
           }
       ]
   }' \
   "https://openam.example.com:8443/openam/json/realms/root/authenticate\
   ?authIndexType=composite_advice\
   &authIndexValue=%3CAdvices%3E%0A\
   %3CAttributeValuePair%3E%0A%3CAttribute%20name%3D\
   %22TransactionConditionAdvice%22%2F%3E%0A\
   %3CValue%3E9dae2c80-fe7a-4a36-b57b-4fb1271b0687\
   %3C%2FValue%3E%0A%3C%2FAttributeValuePair\
   %3E%0A%3C%2FAdvices%3E"
   {
       "tokenId":"AQIC5w...NTcy*",
       "successUrl":"http://www.example.com:8000/index.html",
       "realm":"/"
   }

   If the callbacks were correctly completed, and the push notification was responded to in the ForgeRock Authenticator app, AM returns the original tokenId value.

   If the push notification has not yet been responded to in the ForgeRock Authenticator app, AM will return the required callbacks again, as in the previous step. Wait until the amount of time specified in the waitTime element has passed and retry the request until the tokenId returns.

5. Reevaluate the policy, including the transaction ID as the value of a TxId property in the environment element:

   $ curl \
   --cookie "iPlanetDirectoryPro=AQIC5wM2L...zEAAA..*" \" \
   --request POST \
   --header "Content-Type: application/json" \
   --header "Accept-API-Version: resource=1.0" \
   --data '{
       "resources" : ["http://www.example.com:8000/index.html"],
       "subject" : {
           "ssoToken" : "AQIC5w...NTcy*"
       },
       "environment": {
           "TxId": ["9dae2c80-fe7a-4a36-b57b-4fb1271b0687"]
       }
   }' \
   "https://openam.example.com:8443/openam/json/policies/?_action=evaluate"
   {
       "resource":"http://www.example.com:8000/index.html",
       "actions":{
           "POST":true,
           "GET":true
       },
       "attributes":{
   
       },
       "advices":{
   
       },
       "ttl":0
   }

   As the authentication required by the transaction was successful, the second policy evaluation returns the POST and GET actions as defined in the policy.

   Notice that the time-to-live (ttl) value of the policy evaluation result is set to 0, meaning that the policy must not be cached. The policy only allows a single access to the resource, which must be managed by the policy enforcement point.

   Performing the policy evaluation again with the same subject and resource at this point starts a new transactional authorization flow, requiring each of the steps above to be repeated in order to access the protected resource each time.