Autonomous Identity 2021.3.5

Install a Multi-Node Deployment

This chapter presents instructions on deploying Autonomous Identity in a multi-node target deployment that has Internet connectivity. ForgeRock provides a deployer script that pulls a Docker container image from ForgeRock’s Google Cloud Registry (gcr.io) repository. The image contains the microservices, analytics, and backend databases needed for the system.

This installation assumes that you set up the deployer on a separate machine from the target.

The deployment depends on how the network is configured. You could have a Docker cluster with multiple Spark nodes and Cassandra or MongoDB nodes. The key is to determine the IP addresses of each node, which the deployer uses to set up the overlay network for your multinode system.

Figure 8: A multi-node deployment.

Autonomous Identity deployed in a multi-node deployment

Prerequisites

Let’s deploy Autonomous Identity on a multi-node target on CentOS 7. The following are prerequisites:

  • Operating System. The target machine requires CentOS 7. The deployer machine can use any operating system as long as Docker is installed. For this guide, we use CentOS 7 as its base operating system.

  • Memory Requirements. Make sure you have enough free disk space on the deployer machine before running the deployer.sh commands. We recommend at least 500GB.

  • Default Shell. The default shell for the autoid user must be bash.

  • Subnet Requirements. We recommend deploying your multinode instances within the same subnet. Ports must be open for the installation to succeed. Each instance should be able to communicate to the other instances.

    If any hosts used for the Docker cluster (docker-managers, docker-workers) have an IP address in the range of 10.0.x.x, they will conflict with the Swarm network. As a result, the services in the cluster will not connect to the Cassandra database or Elasticsearch backend.

    The Docker cluster hosts must be in a subnet that provides IP addresses 10.10.1.x or higher.

  • Deployment Requirements. Autonomous Identity provides a Docker image that creates a deployer.sh script that downloads and installs the images necessary. To download the deployment images, you must first obtain a registry key to log into the ForgeRock Google Cloud Registry (gcr.io). The registry key is only available to ForgeRock Autonomous Identity customers. For specific instructions on obtaining the registry key, see How To Configure Service Credentials (Push Auth, Docker) in Backstage.

  • Filesystem Requirements. Autonomous Identity requires a shared filesystem accessible from the Spark master, Spark worker, analytics hosts, and application layer. The shared filesystem should be mounted at the same mount directory on all of those hosts. If the mount directory for the shared filesystem is different from the default, /data , update the /autoid-config/vars.yml file to point to the correct directories:

    analytics_data_dir: /data
    analytics_conf_dif: /data/conf
  • Architecture Requirements. Make sure that the analytics server is on the same node as the Spark master.

  • Database Requirements. Decide which database you are using: Apache Cassandra or MongoDB. The configuration procedure is slightly different for each database.

    Your staff should have someone with Cassandra expertise to troubleshoot any problems. These instructions are not sufficient to solve any Cassandra issues.

  • Deployment Best-Practice. For best performance, dedicate a separate node to Elasticsearch, data nodes, and Kibana.

  • IPv4 Forwarding. Many high-security environments run their CentOS-based systems with IPv4 forwarding disabled. However, Docker Swarm does not work with a disabled IPv4 forward setting. In such environments, make sure to enable IPv4 forwarding in the file /etc/sysctl.conf:

    net.ipv4.ip_forward=1

Set Up the Target Nodes

Make sure you have sufficient storage for your particular deployment. For more information on sizing considerations, see Deployment Planning Guide.

For each target node, run the following commands.

  1. The install assumes that you have CentOS 7 as your operating system. Check your CentOS 7 version.

    $ sudo cat /etc/centos-release
  2. Set the user for the target machine to a username of your choice. For example, autoid.

    $ sudo adduser autoid
  3. Set the password for the user you created in the previous step.

    $ sudo passwd autoid
  4. Configure the user for passwordless sudo.

    $ echo "autoid  ALL=(ALL)  NOPASSWD:ALL" | sudo tee /etc/sudoers.d/autoid
  5. Add administrator privileges to the user.

    $ sudo usermod -aG wheel autoid
  6. Change to the user account.

    $ su - autoid
  7. Set up a shared directory on your target servers. The method depends on your machine configuration. Make sure the deployer can write to the shared directory.

Set Up the Deployer Machine

Set up another machine as a deployer node. You can use any OS-based machine for the deployer as long as it has Docker installed. For this example, we use CentOS 7.

  1. The install assumes that you have CentOS 7 as your operating system. Check your CentOS 7 version.

    $ sudo cat /etc/centos-release
  2. Set the user for the target machine to a username of your choice. For example, autoid.

    $ sudo adduser autoid
  3. Set the password for the user you created in the previous step.

    $ sudo passwd autoid
  4. Configure the user for passwordless sudo.

    $ echo "autoid  ALL=(ALL)  NOPASSWD:ALL" | sudo tee /etc/sudoers.d/autoid
  5. Add administrator privileges to the user.

    $ sudo usermod -aG wheel autoid
  6. Change to the user account.

    $ su - autoid
  7. Install yum-utils package on the deployer machine. yum-utils is a utilities manager for the Yum RPM package repository. The repository compresses software packages for Linux distributions.

    $ sudo yum install -y yum-utils
  8. Create the installation directory. Note that you can use any install directory for your system as long as your run the deployer.sh script from there. Also, the disk volume where you have the install directory must have at least 8GB free space for the installation.

    $ mkdir ~/autoid-config

Install Docker on the Deployer Machine

Install Docker on the deployer machine. We run commands from this machine to install Autonomous Identity on the target machine. In this example, we use CentOS 7.

  1. On the target machine, set up the Docker-CE repository.

    $ sudo yum-config-manager \
         --add-repo https://download.docker.com/linux/centos/docker-ce.repo
  2. Install the latest version of the Docker CE, the command-line interface, and containerd.io, a containerized website.

    $ sudo yum install -y docker-ce docker-ce-cli containerd.io
  3. Enable Docker to start at boot.

    $ sudo systemctl enable docker
  4. Start Docker.

    $ sudo systemctl start docker
  5. Check that Docker is running.

    $ systemctl status docker
  6. Add the user to the Docker group.

    $ sudo usermod -aG docker ${USER}

Set Up SSH on the Deployer

  1. On the deployer machine, change to the ~/.ssh directory.

    $ cd ~/.ssh
  2. Run ssh-keygen to generate an RSA keypair, and then click Enter. You can use the default filename. Enter a password for protecting your private key.

    $ ssh-keygen -t rsa -C "autoid"

    The public and private rsa key pair is stored in home-directory/.ssh/id_rsa and home-directory/.ssh/id_rsa.pub .

  3. Copy the SSH key to the autoid-config directory.

    $ cp id_rsa ~/autoid-config
  4. Change the privileges to the file.

    $ chmod 400 ~/autoid-config/id_rsa
  5. Copy your public SSH key, id_rsa.pub , to each of your target machine’s ~/.ssh/authorized_keys file.

    If your target system does not have an /authorized_keys directory, create it using mkdir -p ~/.ssh/authorized_keys.

    For this example, copy the SSH key to each node:

    $ ssh-copy-id -i id_rsa.pub autoid@34.105.15.198
    $ ssh-copy-id -i id_rsa.pub autoid@34.105.15.201
    $ ssh-copy-id -i id_rsa.pub autoid@34.105.15.229
  6. On the deployer machine, test your SSH connection to each target machine. This is a critical step. Make sure the connection works before proceeding with the installation.

    If you can successfully SSH to each machine, set the privileges on your ~/.ssh and ~/.ssh/authorized_keys .

    • SSH to first node:

      $ ssh autoid@34.105.15.198
      
      Last login: Sat Oct 3 03:02:40 2020

      Set the privileges.

      $ chmod 700 ~/.ssh && chmod 600 ~/.ssh/authorized_keys

      Enter Exit to end your SSH session.

    • SSH to the second node:

      $ ssh autoid@34.105.15.201
      
      Last login: Sat Oct  3 03:06:40 2020

      Set the privileges.

      $ chmod 700 ~/.ssh && chmod 600 ~/.ssh/authorized_keys

      Enter Exit to end your SSH session.

    • SSH to the third node:

      $ ssh autoid@34.105.15.229
      
      Last login: Sat Oct  3 03:10:40 2020

      Set the privileges.

      $ chmod 700 ~/.ssh && chmod 600 ~/.ssh/authorized_keys

      Enter Exit to end your SSH session.

Install Autonomous Identity

Before you begin, make sure you have CentOS 7 installed on your target machine.

  1. On the deployer machine, change to the installation directory.

    $ cd ~/autoid-config/
  2. Log in to the ForgeRock Google Cloud Registry (gcr.io) using the registry key. The registry key is only available to ForgeRock Autonomous Identity customers. For specific instructions on obtaining the registry key, see How To Configure Service Credentials (Push Auth, Docker) in Backstage.

    $ docker login -u _json_key -p "$(cat autoid_registry_key.json)" https://gcr.io/forgerock-autoid

    You should see:

    Login Succeeded
  3. Run the create-template command to generate the deployer.sh script wrapper. Note that the command sets the configuration directory on the target node to /config. Note that the --user parameter eliminates the need to use sudo while editing the hosts file and other configuration files.

    $ docker run --user=$(id -u) -v ~/autoid-config:/config -it gcr.io/forgerock-autoid/deployer:2021.3.5 create-template
  4. Make the script executable.

    $ chmod +x deployer.sh
  5. To see the list of commands, enter deployer.sh .

    $ ./deployer.sh
    
    Usage: deployer <command>
    
    Commands:
      create-template
      download-images
      import-deployer
      encrypt-vault
      decrypt-vault
      run
      create-tar
      install-docker
      install-dbutils
      upgrade

Configure Autonomous Identity

The create-template command from the previous section creates a number of configuration files, required for the deployment: ansible.cfg, vars.yml, hosts, and vault.yml.

If you are running a deployment for evaluation, you can minimally set the private IP address mapping in the vars.yml file in step 2, edit the hosts file in step 3, jump to step 6 to download the images, and then run the deployer in step 7.
  1. The create-template commands creates a number of configuration files, including ~/autoid-config/ansible.cfg . Open a text editor and edit the ansible.cfg to set up the remote user and SSH private key file location on the target node. Make sure that the remote_user exists on the target node and that the deployer machine can ssh to the target node as the user specified in the id_rsa file.

    [defaults]
    host_key_checking = False
    remote_user = autoid
    private_key_file = id_rsa
  2. On the deployer machine, open a text editor and edit the ~/autoid-config/vars.yml file to configure specific settings for your deployment:

    • Domain and Target Environment. Set the domain name and target environment specific to your deployment by editing the /autoid-config/vars.xml file. By default, the domain name is set to forgerock.com and the target environment is set to autoid. The default Autonomous Identity URL will be: https://autoid-ui.forgerock.com . For this example, we use the default values.

      domain_name: forgerock.com
      target_environment: autoid

      If you change the domain name and target environment, you need to also change the certificates to reflect the new changes. For more information, see Customize Domains.

    • Analytics Data Directory and Analytics Configuration Direction. For a multi-node Spark deployment, Autonomous Identity requires a shared filesystem accessible from Spark Master, Spark Worker(s), and Analytics hosts. The shared filesystem should be mounted at same mount directory on all of the above hosts. If the mount directory for shared filesystem is different than /data, update the following properties in the vars.yaml file to point to the correct location:

      analytics_data_dir: /data
      analytics_conf_dif: /data/conf
    • Dark Theme Mode. Optional. By default, the Autonomous Identity UI displays its pages with a light background. You can set a dark theme mode by setting the enable_dark_theme property to true.

    • Database Type. By default, Apache Cassandra is set as the default database for Autonomous Identity. For MongoDB, set the db_driver_type: to mongo.

      db_driver_type: mongo
    • Private IP Address Mapping. Define a mapping between the external IP and private IP addresses. This occurs when your target host is in a cloud, so that your external and internal IP addresses are different.

      For each target node, add the private_ip_address_mapping property in the ~/autoid-config/vars.yml file. You can look up the private IP on the cloud console, or run sudo ifconfig on the target host. Make sure the values are within double quotes. The key should not be in double quotes and should have two spaces preceding the IP address.

      private_ip_address_mapping:
        external_ip:  "internal_ip"

      For example:

      private_ip_address_mapping:
        34.105.16.198:  "10.128.0.51"
        34.105.16.201:  "10.128.0.54"
        34.105.16.229:  "10.128.0.71"
    • Authentication Option. Autonomous Identity provides a single sign-on (SSO) feature that you can configure with an OIDC identity provider. For more information, see Set Up SSO.

    • Access Log. By default, the access log is enabled. If you want to disable the access log, set the access_log_enabled variable to "false".

    • JWT Expiry and Secret File. Optional. By default, the session JWT is set at 30 minutes. To change this value, set the jwt_expiry property to a different value.

      jwt_expiry: "30 minutes"
      jwt_secret_file: "{{install path}}"/jwt/secret.txt"
      jwt_audience: "http://my.service"
      oidc_jwks_url: "na"
    • MongoDB Configuration. For MongoDB clusters, enable replication by uncommenting the mongodb_replication_replset property.

      # uncomment below for mongo with replication enabled. Not needed for single node deployments
      mongodb_replication_replset: mongors

      Also, enable a custom key for inter-machine authentication in the clustered nodes.

      # custom key
      # password for inter-process authentication
      # please regenerate this file on production environment with
      # command 'openssl rand -base64 741'
      mongodb_keyfile_content: |
        8pYcxvCqoe89kcp33KuTtKVf5MoHGEFjTnudrq5BosvWRoIxLowmdjrmUpVfAivh
        CHjqM6w0zVBytAxH1lW+7teMYe6eDn2S/O/1YlRRiW57bWU3zjliW3VdguJar5i
        Z+1a8lI+0S9pWynbv9+Ao0aXFjSJYVxAm/w7DJbVRGcPhsPmExiSBDw8szfQ8PAU
        2hwRl7nqPZZMMR+uQThg/zV9rOzHJmkqZtsO4UJSilG9euLCYrzW2hdoPuCrEDhu
        Vsi5+nwAgYR9dP2oWkmGN1dwRe0ixSIM2UzFgpaXZaMOG6VztmFrlVXh8oFDRGM0
        cGrFHcnGF7oUGfWnI2Cekngk64dHA2qD7WxXPbQ/svn9EfTY5aPw5lXzKA87Ds8p
        KHVFUYvmA6wVsxb/riGLwc+XZlb6M9gqHn1XSpsnYRjF6UzfRcRR2WyCxLZELaqu
        iKxLKB5FYqMBH7Sqg3qBCtE53vZ7T1nefq5RFzmykviYP63Uhu/A2EQatrMnaFPl
        TTG5CaPjob45CBSyMrheYRWKqxdWN93BTgiTW7p0U6RB0/OCUbsVX6IG3I9N8Uqt
        l8Kc+7aOmtUqFkwo8w30prIOjStMrokxNsuK9KTUiPu2cj7gwYQ574vV3hQvQPAr
        hhb9ohKr0zoPQt31iTj0FDkJzPepeuzqeq8F51HB56RZKpXdRTfY8G6OaOT68cV5
        vP1O6T/okFKrl41FQ3CyYN5eRHyRTK99zTytrjoP2EbtIZ18z+bg/angRHYNzbgk
        lc3jpiGzs1ZWHD0nxOmHCMhU4usEcFbV6FlOxzlwrsEhHkeiununlCsNHatiDgzp
        ZWLnP/mXKV992/Jhu0Z577DHlh+3JIYx0PceB9yzACJ8MNARHF7QpBkhtuGMGZpF
        T+c73exupZFxItXs1Bnhe3djgE3MKKyYvxNUIbcTJoe7nhVMrwO/7lBSpVLvC4p3
        wR700U0LDaGGQpslGtiE56SemgoP

      On production deployments, you can regenerate this file by running the following command:

      $ openssl rand -base64 741
    • Elasticsearch Heap Size. Optional. The default heap size for Elasticsearch is 1GB, which may be small for production. For production deployments, uncomment the option and specify 2G or 3G.

      #elastic_heap_size: 1g   # sets the heap size (1g|2g|3g) for the Elastic Servers
    • Java API Service. Optional. Set the Java API Service (JAS) properties for the deployment: authentication, maximum memory, directory for attribute mappings data source entities:

      jas:
        auth_enabled: true
        max_memory: 2048M
        mapping_entity_type: /common/mappings
        datasource_entity_type: /common/datasources
  3. Open a text editor and enter the public IP addresses of the target machines in the ~/autoid-config/hosts file. Make sure the target host IP addresses are accessible from the deployer machine. The following is an example of the ~/autoid-config/hosts file. NOTE: [notebook] is not used in Autonomous Identity.

    Click to See a Host File for a Multi-Node Cassandra Deployment

    If you configured Cassandra as your database, the ~/autoid-config/hosts file is as follows for multi-node target deployments:

    [docker-managers]
    34.105.16.198
    
    [docker-workers]
    34.105.16.201
    
    [docker:children]
    docker-managers
    docker-workers
    
    [cassandra-seeds]
    34.105.16.198
    
    [cassandra-workers]
    34.105.16.201
    
    [spark-master]
    34.105.16.198
    
    [spark-workers]
    34.105.16.201
    
    [mongo_master]
    
    [mongo_replicas]
    
    [mongo:children]
    mongo_replicas
    mongo_master
    
    # ELastic Nodes
    [odfe-master-node]
    34.105.16.229
    
    [odfe-data-nodes]
    34.105.16.229
    
    [kibana-node]
    34.105.16.229
    
    [notebook]
    #ip#
    
    Click to See a Host File for a Multi-Node MongoDB Deployment

    If you configured MongoDB as your database, the ~/autoid-config/hosts file is as follows for multi-node target deployments:

    [docker-managers]
    34.105.16.198
    
    [docker-workers]
    34.105.16.201
    
    [docker:children]
    docker-managers
    docker-workers
    
    [cassandra-seeds]
    
    [cassandra-workers]
    
    [spark-master]
    34.105.16.198
    
    [spark-workers]
    34.105.16.201
    
    [mongo_master]
    34.105.16.198  mongodb_master=True
    
    [mongo_replicas]
    34.105.16.201
    
    [mongo:children]
    mongo_replicas
    mongo_master
    
    # ELastic Nodes
    [odfe-master-node]
    34.105.16.229
    
    [odfe-data-nodes]
    34.105.16.229
    
    [kibana-node]
    34.105.16.229
    
    [notebook]
    #ip#
    
  4. Open a text editor and set the Autonomous Identity passwords for the configuration service, LDAP backend, and Cassandra database. The vault passwords file is located at ~/autoid-config/vault.yml.

    Do not include special characters & or $ in vault.yml passwords as it will result in a failed deployer process.
    configuration_service_vault:
      basic_auth_password: Welcome123
    
    openldap_vault:
      openldap_password: Welcome123
    
    cassandra_vault:
      cassandra_password: Welcome123
      cassandra_admin_password: Welcome123
    
    mongo_vault:
      mongo_admin_password: Welcome123
      mongo_root_password: Welcome123
    
    elastic_vault:
      elastic_admin_password: Welcome123
      elasticsearch_password: Welcome123
  5. Encrypt the vault file that stores the Autonomous Identity passwords, located at ~/autoid-config/vault.yml . The encrypted passwords will be saved to /config/.autoid_vault_password . The /config/ mount is internal to the deployer container.

    $ ./deployer.sh encrypt-vault
  6. Download the images. This step downloads software dependencies needed for the deployment and places them in the autoid-packages directory.

    $ ./deployer.sh download-images
  7. Run the deployment.

    $ ./deployer.sh run

Resolve Hostname

After installing Autonomous Identity, set up the hostname resolution for your deployment.

Resolve the hostname:

  1. Configure your DNS servers to access Autonomous Identity dashboard and self-service applications on the target node. The following domain names must resolve to the IP address of the target node: <target-environment>-ui.<domain-name> and <target-environment>-selfservice.<domain-name>.

  2. If DNS cannot resolve target node hostname, edit it locally on the machine that you want to access Autonomous Identity using a browser. Open a text editor and add an entry in the /etc/hosts file for the self-service and UI services for each managed target node.

    **<Target IP Address>  <target-environment>-ui.<domain-name>

    For example:

    34.70.190.144  autoid-ui.forgerock.com
  3. If you set up a custom domain name and target environment, add the entries in /etc/hosts . For example:

    34.70.190.144  myid-ui.abc.com  myid-selfservice.abc.com  etc.

    For more information on customizing your domain name, see Customize Domains.

Access the Dashboard

Access the Autonomous Identity console UI:

  1. Open a browser. If you set up your own url, use it for your login.

  2. Log in as a test user.

    test user: bob.rodgers@forgerock.com
    password: Welcome123

Check Apache Cassandra

Check Cassandra:

  1. On the target node, check the status of Apache Cassandra.

    $ /opt/autoid/apache-cassandra-3.11.2/bin/nodetool status
  2. An example output is as follows:

Datacenter: datacenter1
=======================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
++--++  Address       Load       Tokens       Owns (effective)  Host ID                               Rack
UN  34.70.190.144 1.33 MiB   256          100.0%            a10a91a4-96e83dd-85a2-4f90d19224d9  rack1
++--++

Check MongoDB

Check the status of MongoDB:

  1. On the target node, check the status of MongoDB.

    $ mongo --tls \
    --host <Host IP> \
    --tlsCAFile /opt/autoid/mongo/certs/rootCA.pem  \
    --tlsAllowInvalidCertificates  \
    --tlsCertificateKeyFile /opt/autoid/mongo/certs/mongodb.pem

Check Apache Spark

Check Spark:

  1. SSH to the target node and open Spark dashboard using the bundled text-mode web browser

    You should see Spark Master status as ALIVE and worker(s) with State ALIVE.

    Click to See an Example of the Spark Dashboard
    Spark Dashboard.

Start the Analytics

If the previous installation steps all succeeded, you must now prepare your data’s entity definitions, data sources, and attribute mappings prior to running your analytics jobs. These step are required and are critical for a successful analytics process.

For more information, see Set Entity Definitions.

Copyright © 2010-2022 ForgeRock, all rights reserved.