IG 2023.2

Handlers

Handler objects process a request and context, and return a response. The way the response is created depends on the type of handler.

Chain

Dispatches a request and context to an ordered list of filters, and then finally to a handler.

Filters process the incoming request and context, pass it on to the next filter, and then to the handler. After the handler produces a response, the filters process the outgoing response and context as it makes its way to the client. Note that the same filter can process both the incoming request and the outgoing response but most filters do one or the other.

A Chain can be placed in a configuration anywhere that a handler can be placed.

Unlike ChainOfFilters, Chain finishes by dispatching the request to a handler. For more information, refer to ChainOfFilters.

Usage

{
     "name": string,
     "type": "Chain",
     "config": {
         "filters": [ Filter reference, ... ],
         "handler": Handler reference
     }
}

Properties

"filters": array of Filter references, required

An array of names of filter objects defined in the heap, and inline filter configuration objects.

The chain dispatches the request to these filters in the order they appear in the array.

See also Filters.

"handler": Handler reference, required

Either the name of a handler object defined in the heap, or an inline handler configuration object.

The chain dispatches to this handler after the request has traversed all of the specified filters.

See also Handlers.

Example

{
     "name": "LoginChain",
     "type": "Chain",
     "config": {
         "filters": [ "LoginFilter" ],
         "handler": "ReverseProxyHandler"
     }
}

More information

org.forgerock.openig.filter.ChainHandlerHeaplet

ClientHandler

Sends requests to third-party services that are accessible through HTTP, and reconstructs the response from the received bytes. A third-party service is one that IG calls for data, such as an HTTP API or AM, or one to which IG submits data. When IG relays a request to a third-party service, IG is acting as a client of the service. IG is client-side.

Consider the following comparison of the ClientHandler and ReverseProxyHandler:

ClientHandler ReverseProxyHandler

Use this handler to …​

Send requests to third-party services accessed within a route. The service can be AM or an HTTP API. The service can be an HTTP endpoint, such as AM, IDM, Identity Cloud, or any custom HTTP API.

Send requests to the final service accessed by a route. The service can be the final downstream application.

If the service does not respond in time, this handler …​

Propagates the error through the Promise flow.

If the error is not handled within the route, for example, by a FailureHandler, the handler returns a 500 Internal Server Error response.

Stops processing the request, and returns a 502 Bad Gateway response.

When uploading or downloading large files, prevent timeout issues by increasing the value of soTimeout, and using a streaming mode, as follows:

Configure the streamingEnabled property of AdminHttpApplication.

Usage

{
  "name": string,
  "type": "ClientHandler",
  "config": {
    "vertx": object,
    "connections": configuration expression<number>,
    "disableReuseConnection": configuration expression<boolean>, //*
    "stateTrackingEnabled": configuration expression<boolean>, //*
    "soTimeout": configuration expression<duration>,
    "connectionTimeout": configuration expression<duration>,
    "connectionTimeToLive": configuration expression<duration>, //*
    "numberOfWorkers": configuration expression<number>, //*
    "protocolVersion": configuration expression<enumeration>,
    "http2PriorKnowledge": configuration expression<boolean>,
    "proxyOptions": ProxyOptions reference,
    "temporaryStorage": TemporaryStorage reference,
    "tls": ClientTlsOptions reference,
    "asyncBehavior": configuration expression<enumeration>, //*
    "retries": object,
    "circuitBreaker": object,
    "hostnameVerifier": configuration expression<enumeration>, //deprecated
    "proxy": Server reference, //deprecated
    "systemProxy": boolean //deprecated
  }
}

* Legacy; no longer supported

Properties

"vertx": object, optional

Vert.x-specific configuration for the handler when IG is client-side. When IG is acting server-side, configure the connectors:vertx property of admin.json.

When IG sends requests to a proxied application or requests services from a third-party application, IG is client-side. IG is acting as a client of the application, and the application is acting as a server.

Vert.x options are described in HttpClientOptions.

The vertx object is read as a map, and values are evaluated as configuration expressions.

For properties where IG provides its own first-class configuration, Vert.x configuration options are disallowed, and the IG configuration option takes precedence over Vert.x options configured in vertx. The following Vert.x configuration options are disallowed client-side:

  • port

  • connectTimeout

  • idleTimeout

  • idleTimeoutUnit

  • protocolVersion

  • http2ClearTextUpgrade

  • verifyHost

  • ssl

  • enabledSecureTransportProtocols

  • enabledCipherSuites

  • keyStoreOptions

  • keyCertOptions

  • pemKeyCertOptions

  • pfxKeyCertOptions

  • trustOptions

  • trustStoreOptions

  • pemTrustOptions

  • pfxTrustOptions

  • useAlpn

  • alpnVersions

The following example configures the Vert.x configuration when IG is acting client-side. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "maxWebSocketFrameSize": 128000,
    "maxWebSocketMessageSize": 256000,
    "compressionLevel": 4,
    "maxHeaderSize": 16384
  }
}

The following example configures HTTP/2 connections when IG is acting client-side. The configuration allows IG to make HTTP/2 requests with large headers. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "initialSettings": {
      "maxHeaderListSize": 16384
    }
  }
}
"connections": configuration expression<number>, optional

The maximum number of concurrent HTTP connections in the client connection pool.

Default: 64

"connectionTimeout": configuration expression<duration>, optional

Time to wait to establish a connection, expressed as a duration

Default: 10 seconds

"connectionTimeToLive": configuration expression<duration>, optional

Not supported

"disableReuseConnection": configuration expression<boolean>, optional

Not supported

"stateTrackingEnabled": configuration expression<boolean>, optional

Not supported

"numberOfWorkers": configuration expression<number>, optional

Not supported

"protocolVersion": configuration expression<enumeration>, optional

The version of HTTP protocol to use when processing requests:

  • HTTP/2:

    • For HTTP, process requests using HTTP/1.1.

    • For HTTPS, process requests using HTTP/2.

  • HTTP/1.1:

    • For HTTP and HTTPS, process requests using HTTP/1.1.

  • Not set:

    • For HTTP, process requests using HTTP/1.1.

    • For HTTPS with alpn enabled in ClientTlsOptions, process requests using HTTP/1.1, with an HTTP/2 upgrade request. If the targeted server can use HTTP/2, the client uses HTTP/2.

      For HTTPS with alpn disabled in ClientTlsOptions, process requests using HTTP/1.1, without an HTTP/2 upgrade request.

      Note that alpn is enabled by default in ClientTlsOptions.

Default: Not set

In HTTP/1.1 request messages, a Host header is required to specify the host and port number of the requested resource. In HTTP/2 request messages, the Host header is not available.

In scripts or custom extensions that use HTTP/2, use UriRouterContext.originalUri.host or UriRouterContext.originalUri.port in requests.
"http2PriorKnowledge": configuration expression<boolean>, optional

A flag for whether the client should have prior knowledge that the server supports HTTP/2. This property is for cleartext (non-TLS requests) only, and is used only when protocolVersion is HTTP/2.

  • false: The client checks whether the server supports HTTP/2 by sending an HTTP/1.1 request to upgrade the connection to HTTP/2:

    • If the server supports HTTP/2, the server upgrades the connection to HTTP/2, and subsequent requests are processed over HTTP/2.

    • If the server does not support HTTP/2, the connection is not upgraded, and subsequent requests are processed over HTTP/1.

  • true: The client does not check that the server supports HTTP/2. The client sends HTTP/2 requests to the server, assuming that the server supports HTTP/2.

Default: false

"proxyOptions": ProxyOptions reference>, optional

A proxy server to which requests can be submitted. Use this property to relay requests to other parts of the network. For example, use it to submit requests from an internal network to the internet.

Provide the name of a ProxyOptions object defined in the heap, or an inline configuration.

Default: A heap object named ProxyOptions.

"soTimeout": configuration expression<duration>, optional

Socket timeout, after which stalled connections are destroyed, expressed as a duration.

If SocketTimeoutException errors occur in the logs when you try to upload or download large files, consider increasing soTimeout.

Default: 10 seconds

"temporaryStorage": TemporaryStorage reference, optional

The TemporaryStorage object to buffer the request and response, when the streamingEnabled property of admin.json is false.

Default: A heap object named TemporaryStorage.

tls: ClientTlsOptions reference, optional

Use of a TlsOptions reference is deprecated; use ClientTlsOptions instead. For more information, refer to the Deprecated section of the Release Notes.

Configure options for connections to TLS-protected endpoints, based on ClientTlsOptions. Define the object inline or in the heap.

Default: Connections to TLS-protected endpoints are not configured.

`"asyncBehavior": configuration expression<enumeration>, optional

Not supported

"retries": object, optional

Enable and configure retry for requests.

During the execution of a request to a remote server, if a runtime exception occurs, or a condition is met, IG waits for a delay, and then schedules a new execution of the request. IG tries until the allowed number of retries is reached or the execution succeeds.

A warning-level entry is logged if all retry attempts fail; a debug-level entry is logged if a retry succeeds.

"retries": {
  "enabled": configuration expression<boolean>,
  "condition": runtime expression<boolean>,
  "executor": ScheduledExecutorService reference,
  "count": configuration expression<number>,
  "delay": configuration expression<duration>,
  }
}
"enabled": configuration expression<boolean>, optional

Enable retries.

Default: true

"condition": runtine expression<boolean>, optional

An inline IG expression to define a condition based on the response, such as an error code.

The condition is evaluated as follows:

  • If true, IG retries the request until the value in count is reached.

  • If false, IG retries the request only if a runtime exception occurs, until the value in count is reached.

    Default: ${false}

"executor": ScheduledExecutorService reference, optional

The ScheduledExecutorService to use for scheduling delayed execution of the request.

Default: ScheduledExecutorService

See also ScheduledExecutorService.

"count": configuration expression<number>, optional

The maximum number of retries to perform. After this threshold is passed and if the request is still not successful, then the ClientHandler propagates the failure.

Retries caused by any runtime exception or triggered condition are included in the count.

Default: 5

"delay": _configuration expression<duration>, optional

The time to wait before retrying the request.

After a failure to send the request, if the number of retries is below the threshold, a new attempt is scheduled with the executor service after this delay.

Default: 10 seconds

The following example configures a retry when a downstream component returns a 502 Bad Gateway response code:

"retries": {
    "enabled": true,
    "condition": "${response.status.code == 502}"
}

The following example configures the handler to retry the request only once, after a 1-minute delay:

{
  "retries": {
    "count": 1,
    "delay": "1 minute"
  }
}

The following example configures the handler to retry the request at most 20 times, every second:

{
  "retries": {
    "count": 20,
    "delay": "1 second"
  }
}

The following example configures the handler to retry the request 5 times, every 10 seconds (default values), with a dedicated executor:

{
  "retries": {
    "executor": {
      "type": "ScheduledExecutorService",
      "config": {
        "corePoolSize": 20
      }
    }
  }
}
"circuitBreaker": object, optional

Enable and configure a circuit breaker to trip when the number of failures exceeds a configured threshold. Calls to downstream services are stopped, and a runtime exception is returned. The circuit breaker is reset after the configured delay.

{
  "circuitBreaker": {
    "enabled": configuration expression<boolean>,
    "maxFailures":  configuration expression<integer>,
    "openDuration": configuration expression<duration>,
    "openHandler": Handler reference,
    "slidingCounter":  object,
    "executor":  ScheduledExecutorService reference
  }
}
"enabled": configuration expression<boolean>, optional

A flag to enable the circuit breaker.

Default: true

"maxFailures": configuration expression<number>, required

The maximum number of failed requests allowed in the window given by size, before the circuit breaker trips. The value must be greater than zero.

When retries is set, the circuit breaker does not count retried requests as failures. Bear this in mind when you set maxFailures.

In the following example, a request can fail and then be retried three times. If it fails the third retry, the request has failed four times, but the circuit breaker counts only one failure.

{
  "retries": {
    "count": 3,
    "delay": "1 second"
  }
}
"openDuration": configuration expression<duration>, required

The duration for which the circuit stays open after the circuit breaker trips. The executor schedules the circuit to be closed after this duration.

"openHandler": Handler reference, optional

The Handler to call when the circuit is open.

Default: A handler that throws a RuntimeException with a "circuit-breaker open" message.

"slidingCounter": object, optional

A sliding window error counter. The circuit breaker trips when the number of failed requests in the number of requests given by size reaches maxFailures.

The following image illustrates how the sliding window counts failed requests:

Example sliding window error counter. 
{
  "slidingCounter":  {
    "size": configuration expression<number>
  }
}
"size": configuration expression<number>, required

The size of the sliding window in which to count errors.

The value of size must be greater than zero, and greater than the value of maxFailures, otherwise an exception is thrown.

"executor": ScheduledExecutorService reference, optional

A ScheduledExecutorService to schedule closure of the circuit after the duration given by openDuration.

Default: The default ScheduledExecutorService in the heap

"hostnameVerifier": configuration expression<enumeration>, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The way to handle hostname verification for outgoing SSL connections. Use one of the following values:

  • ALLOW_ALL: Allow a certificate issued by a trusted CA for any hostname or domain to be accepted for a connection to any domain.

    This setting allows a certificate issued for one company to be accepted as a valid certificate for another company. To prevent the compromise of TLS connections, use this setting in development mode only. In production, use STRICT.

  • STRICT: Match the hostname either as the value of the the first CN, or any of the subject-alt names.

    A wildcard can occur in the CN, and in any of the subject-alt names. Wildcards match one domain level, so *.example.com matches www.example.com but not some.host.example.com.

Default: STRICT

"proxy": Server reference, optional
This property is deprecated; use proxyOptions instead. For more information, refer to the Deprecated section of the Release Notes.

A proxy server to which requests can be submitted. Use this property to relay requests to other parts of the network. For example, use it to submit requests from an internal network to the internet.

If both proxy and systemProxy are defined, proxy takes precedence.

"proxy" : {
  "uri": configuration expression<uri string>,
  "username": configuration expression<string>,
  "passwordSecretId": configuration expression<secret-id>,
  "secretsProvider": SecretsProvider reference,
  "password": configuration expression<string> //deprecated
}
"uri": configuration expression<uri string>, required

URI of a server to use as a proxy for outgoing requests.

The result of the expression must be a string that represents a valid URI, but is not a real java.net.URI object.

"username": configuration expression<string>, required if the proxy requires authentication

Username to access the proxy server.

"passwordSecretId": configuration expression<secret-id>, required if the proxy requires authentication

The secret ID of the password to access the proxy server.

This secret ID must point to a GenericSecret.

"secretsProvider": SecretsProvider reference, optional

The SecretsProvider to query for the proxy’s password.

"password": configuration expression<string>, required if the proxy requires authentication
This property is deprecated and is not considered secure. Use passwordSecretId instead. For more information, refer to the Deprecated section of the Release Notes.

Password to access the proxy server.

"systemProxy": boolean, optional
This property is deprecated; use proxyOptions instead. For more information, refer to the Deprecated section of the Release Notes.

Submit outgoing requests to a system-defined proxy, set by the following system properties or their HTTPS equivalents:

  • http.proxyHost, the host name of the proxy server.

  • http.proxyPort, the port number of the proxy server. The default is 80.

  • http.nonProxyHosts, a list of hosts that should be reached directly, bypassing the proxy.

This property can’t be used with a proxy that requires a username and password. Use the property proxy instead.

If both proxy and systemProxy are defined, proxy takes precedence.

For more information, see Java Networking and Proxies.

Default: False.

"keyManager": Key manager reference(s), optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The key manager(s) that handle(s) this client’s keys and certificates.

The value of this field can be a single reference, or an array of references.

Provide either the name(s) of key manager object(s) defined in the heap, or specify the configuration object(s) inline.

You can specify either a single key manager, as in "keyManager": "MyKeyManager", or an array of key managers, as in "keyManager": [ "FirstKeyManager", "SecondKeyManager" ].

If you do not configure a key manager, then the client cannot present a certificate, and so cannot play the client role in mutual authentication.

"sslCipherSuites": array of strings, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

Array of cipher suite names, used to restrict the cipher suites allowed when negotiating transport layer security for an HTTPS connection.

For information about the available cipher suite names, see the documentation for the Java virtual machine (JVM) where you run IG. For Oracle Java, refer to the list of JSSE Cipher Suite Names.

Default: Allow any cipher suite supported by the JVM.

"sslContextAlgorithm": string, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The SSLContext algorithm name, as listed in the table of SSLContext Algorithms for the Java Virtual Machine used by IG.

Default: TLS

"sslEnabledProtocols": array of strings, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

Array of protocol names, used to restrict the protocols allowed when negotiating transport layer security for an HTTPS connection.

Default: Allow any protocol supported by the JVM.

"trustManager": Trust manager reference(s), optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The trust managers that handle(s) peers' public key certificates.

The value of this field can be a single reference, or an array of references.

Provide either the name(s) of trust manager object(s) defined in the heap, or specify the configuration object(s) inline.

You can specify either a single trust manager, as in "trustManager": "MyTrustManager", or an array of trust managers, as in "trustManager": [ "FirstTrustManager", "SecondTrustManager" ].

If you do not configure a trust manager, then the client uses only the default Java truststore. The default Java truststore depends on the Java environment. For example, $JAVA_HOME/lib/security/cacerts.

More information

org.forgerock.openig.handler.ClientHandlerHeaplet

DesKeyGenHandler (deprecated)

This object is deprecated and not considered secure. For more information, refer to the Deprecated section of the Release Notes.

Consider using AM’s password replay post-authentication plugin class com.sun.identity.authentication.spi.JwtReplayPassword. The plugin encrypts the password captured by AM during authentication, and stores it in a session property. IG looks up the property, decrypts it, and replays the password. Authenticate with credentials from AM.

Generates a DES key for use with AM.

Usage

{
    "name": string,
    "type": "DesKeyGenHandler"
}

More information

org.forgerock.openig.handler.DesKeyGenHandler

DispatchHandler

When a request is handled, the first condition in the list of conditions is evaluated. If the condition expression yields true, the request is dispatched to the associated handler with no further processing. Otherwise, the next condition in the list is evaluated.

Usage

{
  "name": string,
  "type": "DispatchHandler",
  "config": {
    "bindings": [
      {
        "condition": runtime expression<boolean>,
        "handler": Handler reference,
        "baseURI": runtime expression<url>,
      }, ...
    ]
  }
}

Properties

"bindings": array of objects, required

One or more condition and handler bindings.

"condition": runtime expression<boolean>, optional

A flag to indicate that a condition is met. The condition can be based on the request, context, or IG runtime environment, such as system properties or environment variables.

Conditions are defined using IG expressions, as described in Expressions, and are evaluated as follows:

  • true: The request is dispatched to the associated handler.

  • false: The next condition in the list is evaluated.

For example conditions and requests that match them, refer to Example conditions and requests.

Default: ${true}

"handler": Handler reference, required

A Handler to dispatch the request to if the associated condition yields true.

"baseURI": runtime expression<url>,optional

A base URI that overrides the existing request URI. Only scheme, host, and port are used in the supplied URI.

The result of the expression must be a string that represents a valid URI, but is not a real java.net.URI object. For example, it would be incorrect to use ${request.uri}, which is not a String but a MutableUri.

In the following example, the binding condition looks up the hostname of the request. If it finds a match, the value is used for the baseURI. Otherwise, the default value is used:

{
  "properties": {
    "uris": {
      "app1.example.com": {
        "baseURI": "http://backend1:8080/"
      },
      "app2.example.com": {
        "baseURI": "http://backend2:8080/"
      },
      "default": {
        "baseURI": "http://backend3:8080/"
      }
    }
  },
  "handler": {
    "type": "DispatchHandler",
    "config": {
      "bindings": [
        {
          "condition": "${not empty uris[contexts.router.originalUri.host]}",
          "baseURI": "${uris[contexts.router.originalUri.host].baseURI}",
          "handler": "ReverseProxyHandler"
        },
        {
          "baseURI": "${uris['default'].baseURI}",
          "handler": "ReverseProxyHandler"
        }
      ]
    }
  }
}

Default: No change to the base URI

Example

The following sample is from a SAML 2.0 federation configuration:

  • If the incoming URI matches /saml, then IG dispatches to a SamlFederationHandler without further processing.

  • If the previous condition is not met, and the user name is not set in the session context, then IG dispatches the request to a SPInitiatedSSORedirectHandler.

    In this case, the user has not authenticated with the SAML 2.0 Identity Provider, so the SPInitiatedSSORedirectHandler initiates SAML 2.0 SSO from the Service Provider, which is IG.

  • If neither of the previous conditions are met, the request goes through a LoginChain handler.

{
    "name": "DispatchHandler",
    "type": "DispatchHandler",
    "config": {
        "bindings": [
            {
                "condition": "${find(request.uri.path, '^/saml')}",
                "handler": "SamlFederationHandler"
            },
            {
                "condition": "${empty session.username}",
                "handler": "SPInitiatedSSORedirectHandler",
                "baseURI": "http://www.example.com:8081"
            },
            {
                "handler": "LoginChain",
                "baseURI": "http://www.example.com:8081"
            }
        ]
    }
}

More information

org.forgerock.openig.handler.DispatchHandler

Expressions

ForgeRockClientHandler

The ForgeRockClientHandler is a Handler available by default on the heap that chains a default ClientHandler with a TransactionIdOutboundFilter.

This Handler supports ForgeRock audit by supporting the initiation or propagation of audit information from IG to the audit framework. For more information, see AuditService.

The following default ForgeRockClientHandler is available as a default object on the heap, and can be referenced by the name ForgeRockClientHandler.

{
     "name": "ForgeRockClientHandler",
     "type": "Chain",
     "config": {
         "filters": [ "TransactionIdOutboundFilter" ],
         "handler": "ClientHandler"
     }
}

Example

For an example that uses ForgeRockClientHandler to log interactions between IG and AM, see Decorating IG’s interactions with AM.

More information

org.forgerock.openig.heap.Keys

JwkSetHandler

Expose cryptographic keys as a JWK set. Use this handler so that a downstream application can reuse the exposed keys for their assigned purpose.

Consider the following limitations:

  • When the public key is not available, the corresponding private key cannot be exposed. Note, however, that it is not recommended to expose private keys as JWK.

  • Keys in secure storage, such as a Hardware Security Module (HSM) or remote server, cannot be exposed.

For a description of how secrets are managed, see Secrets.

For information about JWKs and JWK Sets, see JSON Web Key (JWK).

Usage

{
  "name": string,
  "type": "JwkSetHandler",
  "config": {
    "secretsProvider": SecretsProvider reference,
    "purposes": [ object, ... ]
  }
}
"secretsProvider": SecretsProvider reference, required

The SecretsProvider to use to resolve the secret. Provide either the name of a SecretsProvider object defined in the heap, or specify a SecretsProvider object inline.

"purposes": array of objects, required

One or more purposes for the secret.

{
  "purposes": [
    {
      "secretId": configuration expression<secret-id>,
      "keyUsage": configuration expression<enumeration>
    },
    ...
  ]
}
"secretId": configuration expression<secret-id>, required

The secret ID of the key to be exposed in the JwkSet.

This secret ID must point to a CryptoKey.

"keyUsage": configuration expression<enumeration>, required

The allowed use of the key:

  • AGREE_KEY: Export the private key used in the key agreement protocol, for example, Diffie-Hellman.

  • ENCRYPT: Export the public key used to encrypt data.

  • DECRYPT: Export the private key used to decrypt data.

  • SIGN: Export the private key used to sign data.

  • VERIFY: Export the public key used to verify signature data.

  • WRAP_KEY: Export the public key used to encrypt (wrap) other keys.

  • UNWRAP_KEY: Export the private key used to decrypt (unwrap) other keys.

Examples

This example uses a JwkSetHandler to expose a signing key used by the JwtBuilderFilter:

  1. Set an environment variable for the base64-encoded secret to sign the JWT:

    $ export SIGNING_KEY_SECRET_ID='cGFzc3dvcmQ='

  2. Add the following route to IG:

    • Linux

    • Windows

    $HOME/.openig/config/routes/jwksethandler.json
    appdata\OpenIG\config\routes\jwksethandler.json
    {
  "name": "jwksethandler",
  "condition": "${find(request.uri.path, '/jwksethandler')}",
  "heap": [
    {
      "name": "SecretKeyPropertyFormat-1",
      "type": "SecretKeyPropertyFormat",
      "config": {
        "format": "BASE64",
        "algorithm": "AES"
      }
    },
    {
      "name": "SystemAndEnvSecretStore-1",
      "type": "SystemAndEnvSecretStore",
      "config": {
        "mappings": [{
          "secretId": "signing.key.secret.id",
          "format": "SecretKeyPropertyFormat-1"
        }]
      }
    }
  ],
  "handler": {
    "type": "Chain",
    "config": {
      "filters": [
        {
          "name": "JwtBuilderFilter-1",
          "type": "JwtBuilderFilter",
          "config": {
            "template": {
              "name": "${contexts.userProfile.commonName}",
              "email": "${contexts.userProfile.rawInfo.mail[0]}"
            },
            "secretsProvider": "SystemAndEnvSecretStore-1",
            "signature": {
              "secretId": "signing.key.secret.id",
              "algorithm": "HS256"
            }
          }
        }
      ],
      "handler": {
        "type": "JwkSetHandler",
        "config": {
          "secretsProvider": "SystemAndEnvSecretStore-1",
          "purposes": [{
            "secretId": "signing.key.secret.id",
            "keyUsage": "SIGN"
          }]
        }
      }
    }
  }
}

    Notice the following features of the route:

    • The route matches requests to /jwksethandler.

    • The JWT signing key is managed by the SysEnvStoreSecretStore in the heap, which refers to the SecretKeyPropertyFormat for the secret’s format.

    • The JwtBuilderFilter signature property refers to the JWT signing key in the SysEnvStoreSecretStore.

    • The JwkSetHandler refers to the JWT signing key.

  3. Go to http://ig.example.com:8080/jwksethandler.

    The signing key is displayed as an array, as follows:

    {
  "keys": [
    {
      "k": "cGFzc3dvcmQ",
      "kid": "signing.key.secret.id",
      "kty": "oct",
      "use": "sig"
    }
  ]
}

    The JWK set secret is ULR base64-encoded. Although the secret is set with the value cGFzc3dvcmQ=, the value cGFzc3dvcmQ is exposed.

More information

org.forgerock.openig.handler.JwkSetHandler

ResourceHandler

Serves static content from a directory.

Usage

{
  "name": string,
  "type": "ResourceHandler",
  "config": {
    "directories": [ configuration expression<string>, ... ],
    "basePath": configuration expression<string>,
    "welcomePages": [ configuration expression<string>, ... ],
    "temporaryStorage": TemporaryStorage reference
  }
}

Properties

"directories": array of configuration expression<strings>, required

A list of one or more directories in which to search for static content.

When multiple directories are specified in an array, the directories are searched in the listed order.

"basePath": _configuration expression<string>, required if the route is not /

The base path of the incoming request for static content.

To specify no base path, leave this property out of the configuration, or specify it as "basePath": "" or "basePath": "/".

Default: "".

"welcomePages": array of configuration expression<strings>, optional

A set of static content to serve from one of the specified directories when no specific resource is requested.

When multiple sets of static content are specified in an array, the sets are searched for in the listed order. The first set that is found is used.

Default: Empty

"temporaryStorage": TemporaryStorage reference, optional

A TemporaryStorage object for the static content.

Default: TemporaryStorage heap object

Example

The following example serves requests to http://ig.example.com:8080 with the static file index.html from /path/to/static/pages/:

{
  "name": "StaticWebsite",
  "type": "ResourceHandler",
  "config": {
    "directories": ["/path/to/static/pages"],
    "welcomePages": ["index.html"]
  }
}

When the basePath is /website, the example serves requests to http://ig.example.com:8080/website:

{
  "name": "StaticWebsite",
  "type": "ResourceHandler",
  "config": {
    "directories": ["/path/to/static/pages"],
    "basePath": "/website",
    "welcomePages": ["index.html"]
  }
}

More information

org.forgerock.openig.handler.resources.ResourceHandler

org.forgerock.http.protocol.Entity

ReverseProxyHandler

Proxy requests to protected applications. When IG relays the request to the protected application, IG is acting as a client of the application. IG is client-side.

Consider the following comparison of the ClientHandler and ReverseProxyHandler:

ClientHandler ReverseProxyHandler

Use this handler to …​

Send requests to third-party services accessed within a route. The service can be AM or an HTTP API. The service can be an HTTP endpoint, such as AM, IDM, Identity Cloud, or any custom HTTP API.

Send requests to the final service accessed by a route. The service can be the final downstream application.

If the service does not respond in time, this handler …​

Propagates the error through the Promise flow.

If the error is not handled within the route, for example, by a FailureHandler, the handler returns a 500 Internal Server Error response.

Stops processing the request, and returns a 502 Bad Gateway response.

When uploading or downloading large files, prevent timeout issues by increasing the value of soTimeout, and using a streaming mode, as follows:

Configure the streamingEnabled property of AdminHttpApplication.

Usage

{
  "name": string,
  "type": "ReverseProxyHandler",
  "config": {
    "vertx": object,
    "connections": configuration expression<number>,
    "disableReuseConnection": configuration expression<boolean>, //*
    "stateTrackingEnabled": configuration expression<boolean>, //*
    "soTimeout": configuration expression<duration>,
    "connectionTimeout": configuration expression<duration>,
    "connectionTimeToLive": configuration expression<duration>, //*
    "numberOfWorkers": configuration expression<number>, //*
    "protocolVersion": configuration expression<enumeration>,
    "http2PriorKnowledge": configuration expression<boolean>,
    "proxyOptions": ProxyOptions reference,
    "temporaryStorage": TemporaryStorage reference,
    "tls": ClientTlsOptions reference,
    "asyncBehavior": configuration expression<enumeration>, //*
    "retries": object,
    "circuitBreaker": object,
    "websocket": object,
    "hostnameVerifier": configuration expression<enumeration>, //deprecated
    "proxy": Server reference, //deprecated
    "systemProxy": boolean //deprecated
  }
}

* Legacy; no longer supported

Properties

"vertx": object, optional

Vert.x-specific configuration for the handler, where IG does not provide its own first-class configuration. Vert.x options are described in HttpClientOptions.

The vertx object is read as a map, and values are evaluated as configuration expressions.

For properties where IG provides its own first-class configuration, Vert.x configuration options are disallowed, and the IG configuration option takes precedence over Vert.x options configured in vertx. The following Vert.x configuration options are disallowed client-side:

  • port

  • connectTimeout

  • idleTimeout

  • idleTimeoutUnit

  • protocolVersion

  • http2ClearTextUpgrade

  • verifyHost

  • ssl

  • enabledSecureTransportProtocols

  • enabledCipherSuites

  • keyStoreOptions

  • keyCertOptions

  • pemKeyCertOptions

  • pfxKeyCertOptions

  • trustOptions

  • trustStoreOptions

  • pemTrustOptions

  • pfxTrustOptions

  • useAlpn

  • alpnVersions

The following example configures the Vert.x configuration when IG is acting client-side. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "maxWebSocketFrameSize": 128000,
    "maxWebSocketMessageSize": 256000,
    "compressionLevel": 4,
    "maxHeaderSize": 16384
  }
}

The following example configures HTTP/2 connections when IG is acting client-side. The configuration allows IG to make HTTP/2 requests with large headers. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "initialSettings": {
      "maxHeaderListSize": 16384
    }
  }
}
"connections": configuration expression<number>, optional

The maximum number of concurrent HTTP connections in the client connection pool.

Default: 64

"connectionTimeout": configuration expression<duration>, optional

Time to wait to establish a connection, expressed as a duration

Default: 10 seconds

"connectionTimeToLive": configuration expression<duration>, optional

Not supported

"disableReuseConnection": configuration expression<boolean>, optional

Not supported

"stateTrackingEnabled": configuration expression<boolean>, optional

Not supported

"numberOfWorkers": configuration expression<number>, optional

Not supported

"protocolVersion": configuration expression<enumeration>, optional

The version of HTTP protocol to use when processing requests:

  • HTTP/2:

    • For HTTP, process requests using HTTP/1.1.

    • For HTTPS, process requests using HTTP/2.

  • HTTP/1.1:

    • For HTTP and HTTPS, process requests using HTTP/1.1.

  • Not set:

    • For HTTP, process requests using HTTP/1.1.

    • For HTTPS with alpn enabled in ClientTlsOptions, process requests using HTTP/1.1, with an HTTP/2 upgrade request. If the targeted server can use HTTP/2, the client uses HTTP/2.

      For HTTPS with alpn disabled in ClientTlsOptions, process requests using HTTP/1.1, without an HTTP/2 upgrade request.

      Note that alpn is enabled by default in ClientTlsOptions.

Default: Not set

In HTTP/1.1 request messages, a Host header is required to specify the host and port number of the requested resource. In HTTP/2 request messages, the Host header is not available.

In scripts or custom extensions that use HTTP/2, use UriRouterContext.originalUri.host or UriRouterContext.originalUri.port in requests.
"http2PriorKnowledge": configuration expression<boolean>, optional

A flag for whether the client should have prior knowledge that the server supports HTTP/2. This property is for cleartext (non-TLS requests) only, and is used only when protocolVersion is HTTP/2.

  • false: The client checks whether the server supports HTTP/2 by sending an HTTP/1.1 request to upgrade the connection to HTTP/2:

    • If the server supports HTTP/2, the server upgrades the connection to HTTP/2, and subsequent requests are processed over HTTP/2.

    • If the server does not support HTTP/2, the connection is not upgraded, and subsequent requests are processed over HTTP/1.

  • true: The client does not check that the server supports HTTP/2. The client sends HTTP/2 requests to the server, assuming that the server supports HTTP/2.

Default: false

"proxyOptions": ProxyOptions reference>, optional

A proxy server to which requests can be submitted. Use this property to relay requests to other parts of the network. For example, use it to submit requests from an internal network to the internet.

Provide the name of a ProxyOptions object defined in the heap, or an inline configuration.

Default: A heap object named ProxyOptions.

"soTimeout": configuration expression<duration>, optional

Socket timeout, after which stalled connections are destroyed, expressed as a duration.

If SocketTimeoutException errors occur in the logs when you try to upload or download large files, consider increasing soTimeout.

Default: 10 seconds

"temporaryStorage": TemporaryStorage reference, optional

The TemporaryStorage object to buffer the request and response, when the streamingEnabled property of admin.json is false.

Default: A heap object named TemporaryStorage.

tls: ClientTlsOptions reference, optional

Use of a TlsOptions reference is deprecated; use ClientTlsOptions instead. For more information, refer to the Deprecated section of the Release Notes.

Configure options for connections to TLS-protected endpoints, based on ClientTlsOptions. Define the object inline or in the heap.

Default: Connections to TLS-protected endpoints are not configured.

`"asyncBehavior": configuration expression<enumeration>, optional

Not supported

"retries": object, optional

Enable and configure retry for requests.

During the execution of a request to a remote server, if a runtime exception occurs, or a condition is met, IG waits for a delay, and then schedules a new execution of the request. IG tries until the allowed number of retries is reached or the execution succeeds.

A warning-level entry is logged if all retry attempts fail; a debug-level entry is logged if a retry succeeds.

"retries": {
  "enabled": configuration expression<boolean>,
  "condition": runtime expression<boolean>,
  "executor": ScheduledExecutorService reference,
  "count": configuration expression<number>,
  "delay": configuration expression<duration>,
  }
}
"enabled": configuration expression<boolean>, optional

Enable retries.

Default: true

"condition": runtine expression<boolean>, optional

An inline IG expression to define a condition based on the response, such as an error code.

The condition is evaluated as follows:

  • If true, IG retries the request until the value in count is reached.

  • If false, IG retries the request only if a runtime exception occurs, until the value in count is reached.

    Default: ${false}

"executor": ScheduledExecutorService reference, optional

The ScheduledExecutorService to use for scheduling delayed execution of the request.

Default: ScheduledExecutorService

See also ScheduledExecutorService.

"count": configuration expression<number>, optional

The maximum number of retries to perform. After this threshold is passed and if the request is still not successful, then the ClientHandler propagates the failure.

Retries caused by any runtime exception or triggered condition are included in the count.

Default: 5

"delay": _configuration expression<duration>, optional

The time to wait before retrying the request.

After a failure to send the request, if the number of retries is below the threshold, a new attempt is scheduled with the executor service after this delay.

Default: 10 seconds

The following example configures a retry when a downstream component returns a 502 Bad Gateway response code:

"retries": {
    "enabled": true,
    "condition": "${response.status.code == 502}"
}

The following example configures the handler to retry the request only once, after a 1-minute delay:

{
  "retries": {
    "count": 1,
    "delay": "1 minute"
  }
}

The following example configures the handler to retry the request at most 20 times, every second:

{
  "retries": {
    "count": 20,
    "delay": "1 second"
  }
}

The following example configures the handler to retry the request 5 times, every 10 seconds (default values), with a dedicated executor:

{
  "retries": {
    "executor": {
      "type": "ScheduledExecutorService",
      "config": {
        "corePoolSize": 20
      }
    }
  }
}
"circuitBreaker": object, optional

Enable and configure a circuit breaker to trip when the number of failures exceeds a configured threshold. Calls to downstream services are stopped, and a runtime exception is returned. The circuit breaker is reset after the configured delay.

{
  "circuitBreaker": {
    "enabled": configuration expression<boolean>,
    "maxFailures":  configuration expression<integer>,
    "openDuration": configuration expression<duration>,
    "openHandler": Handler reference,
    "slidingCounter":  object,
    "executor":  ScheduledExecutorService reference
  }
}
"enabled": configuration expression<boolean>, optional

A flag to enable the circuit breaker.

Default: true

"maxFailures": configuration expression<number>, required

The maximum number of failed requests allowed in the window given by size, before the circuit breaker trips. The value must be greater than zero.

When retries is set, the circuit breaker does not count retried requests as failures. Bear this in mind when you set maxFailures.

In the following example, a request can fail and then be retried three times. If it fails the third retry, the request has failed four times, but the circuit breaker counts only one failure.

{
  "retries": {
    "count": 3,
    "delay": "1 second"
  }
}
"openDuration": configuration expression<duration>, required

The duration for which the circuit stays open after the circuit breaker trips. The executor schedules the circuit to be closed after this duration.

"openHandler": Handler reference, optional

The Handler to call when the circuit is open.

Default: A handler that throws a RuntimeException with a "circuit-breaker open" message.

"slidingCounter": object, optional

A sliding window error counter. The circuit breaker trips when the number of failed requests in the number of requests given by size reaches maxFailures.

The following image illustrates how the sliding window counts failed requests:

Example sliding window error counter. 
{
  "slidingCounter":  {
    "size": configuration expression<number>
  }
}
"size": configuration expression<number>, required

The size of the sliding window in which to count errors.

The value of size must be greater than zero, and greater than the value of maxFailures, otherwise an exception is thrown.

"executor": ScheduledExecutorService reference, optional

A ScheduledExecutorService to schedule closure of the circuit after the duration given by openDuration.

Default: The default ScheduledExecutorService in the heap

"websocket": object, optional

Object to configure upgrade from HTTP or HTTPS protocol to WebSocket protocol.

Every key/value of the websocket object is evaluated as a configuration expression.

List the subprotocols that are proxied by IG in the vertx property of AdminHttpApplication (admin.json). For more information and an example of proxying WebSocket traffic, refer to WebSocket traffic

{
  "websocket": {
    "enabled": configuration expression<boolean>,
    "connectionTimeout": configuration expression<duration>,
    "soTimeout": configuration expression<duration>,
    "numberOfSelectors": configuration expression<number>,
    "tls": ClientTlsOptions reference,
    "vertx": object
  }
}

For more information, refer to The WebSocket Protocol.

"enabled": configuration expression<boolean>,optional

Enable upgrade from HTTP protocol and HTTPS protocol to WebSocket protocol.

Default: false

"connectionTimeout": configuration expression<duration>, optional

The maximum time allowed to establish a WebSocket connection.

Default: The value of handler’s main connectionTimeout.

"soTimeout": configuration expression<duration>, optional

The time after which stalled connections are destroyed.

If there can be long delays between messages, consider increasing this value. Alternatively, keep the connection active by using WebSocket ping messages in your application.

Default: The value of handler’s main soTimeout.

"numberOfSelectors": configuration expression<number>, optional

The maximum number of worker threads.

In deployments with a high number of simultaneous connections, consider increasing the value of this property.

Default: 2

"tls": ClientTlsOptions reference, optional

Configure options for connections to TLS-protected endpoints, based on a ClientTlsOptions configuration. Define a ClientTlsOptions object inline or in the heap.

Default: Use ClientTlsOptions defined for the handler

"vertx": object, optional

Vert.x-specific configuration for the WebSocket connection, where IG does not provide its own first-class configuration. Vert.x options are described in HttpClientOptions.

For properties where IG provides its own first-class configuration, Vert.x configuration options are disallowed, and the IG configuration option takes precedence over Vert.x options configured in vertx. The following Vert.x configuration options are disallowed client-side:

  • port

  • connectTimeout

  • idleTimeout

  • idleTimeoutUnit

  • protocolVersion

  • http2ClearTextUpgrade

  • verifyHost

  • ssl

  • enabledSecureTransportProtocols

  • enabledCipherSuites

  • keyStoreOptions

  • keyCertOptions

  • pemKeyCertOptions

  • pfxKeyCertOptions

  • trustOptions

  • trustStoreOptions

  • pemTrustOptions

  • pfxTrustOptions

  • useAlpn

  • alpnVersions

The following example configures the Vert.x configuration when IG is acting client-side. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "maxWebSocketFrameSize": 128000,
    "maxWebSocketMessageSize": 256000,
    "compressionLevel": 4,
    "maxHeaderSize": 16384
  }
}

The following example configures HTTP/2 connections when IG is acting client-side. The configuration allows IG to make HTTP/2 requests with large headers. When IG is acting server-side, configure the connectors:vertx property of admin.json:

{
  "vertx": {
    "initialSettings": {
      "maxHeaderListSize": 16384
    }
  }
}

The following default vertx configuration provided by this handler overrides the Vert.x defaults:

  • tryUsePerFrameWebSocketCompression = true

  • tryUsePerMessageWebSocketCompression = true

"hostnameVerifier": configuration expression<enumeration>, optional

This property is deprecated; use the ClientTlsOptions property hostnameVerifier instead.

If a ReverseProxyHandler includes the deprecated "hostnameVerifier": "ALLOW_ALL" configuration, it takes precedence, and deprecation warnings are written to the logs.

For more information, refer to the Deprecated section of the Release Notes.

The way to handle hostname verification for outgoing SSL connections. Use one of the following values:

  • ALLOW_ALL: Allow a certificate issued by a trusted CA for any hostname or domain to be accepted for a connection to any domain.

    This setting allows a certificate issued for one company to be accepted as a valid certificate for another company. To prevent the compromise of TLS connections, use this setting in development mode only. In production, use STRICT.

  • STRICT: Match the hostname either as the value of the the first CN, or any of the subject-alt names.

    A wildcard can occur in the CN, and in any of the subject-alt names. Wildcards match one domain level, so *.example.com matches www.example.com but not some.host.example.com.

Default: STRICT

"proxy": Server reference, optional
This property is deprecated; use proxyOptions instead. For more information, refer to the Deprecated section of the Release Notes.

A proxy server to which requests can be submitted. Use this property to relay requests to other parts of the network. For example, use it to submit requests from an internal network to the internet.

If both proxy and systemProxy are defined, proxy takes precedence.

"proxy" : {
  "uri": configuration expression<uri string>,
  "username": configuration expression<string>,
  "passwordSecretId": configuration expression<secret-id>,
  "secretsProvider": SecretsProvider reference,
  "password": configuration expression<string> //deprecated
}
"uri": configuration expression<uri string>, required

URI of a server to use as a proxy for outgoing requests.

The result of the expression must be a string that represents a valid URI, but is not a real java.net.URI object.

username: configuration expression<string>, required if the proxy requires authentication

Username to access the proxy server.

"passwordSecretId": configuration expression<secret-id>, required if the proxy requires authentication

The secret ID of the password to access the proxy server.

This secret ID must point to a GenericSecret.

"secretsProvider": SecretsProvider reference, optional

The SecretsProvider to query for the proxy’s password.

"password": configuration expression<string>, required if the proxy requires authentication
This property is deprecated and is not considered secure. Use passwordSecretId instead. For more information, refer to the Deprecated section of the Release Notes.

Password to access the proxy server.

"systemProxy": boolean, optional
This property is deprecated; use proxyOptions instead. For more information, refer to the Deprecated section of the Release Notes.

Submit outgoing requests to a system-defined proxy, set by the following system properties or their HTTPS equivalents:

  • http.proxyHost, the host name of the proxy server.

  • http.proxyPort, the port number of the proxy server. The default is 80.

  • http.nonProxyHosts, a list of hosts that should be reached directly, bypassing the proxy.

This property can’t be used with a proxy that requires a username and password. Use the property proxy instead.

If both proxy and systemProxy are defined, proxy takes precedence.

For more information, refer to Java Networking and Proxies.

Default: False.

"keyManager": Key manager reference(s), optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The key manager(s) that handle(s) this client’s keys and certificates.

The value of this field can be a single reference, or an array of references.

Provide either the name(s) of key manager object(s) defined in the heap, or specify the configuration object(s) inline.

You can specify either a single key manager, as in "keyManager": "MyKeyManager", or an array of key managers, as in "keyManager": [ "FirstKeyManager", "SecondKeyManager" ].

If you do not configure a key manager, then the client cannot present a certificate, and so cannot play the client role in mutual authentication.

"sslCipherSuites": array of strings, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

Array of cipher suite names, used to restrict the cipher suites allowed when negotiating transport layer security for an HTTPS connection.

For information about the available cipher suite names, see the documentation for the Java virtual machine (JVM) where you run IG. For Oracle Java, refer to the list of JSSE Cipher Suite Names.

Default: Allow any cipher suite supported by the JVM.

"sslContextAlgorithm": string, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

Default: TLS

"sslEnabledProtocols": array of strings, optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

Array of protocol names, used to restrict the protocols allowed when negotiating transport layer security for an HTTPS connection.

Default: Allow any protocol supported by the JVM.

"trustManager": Trust manager reference(s), optional
This property is deprecated; use the tls property instead to configure ClientTlsOptions. For more information, refer to the Deprecated section of the Release Notes.

The trust managers that handle(s) peers' public key certificates.

The value of this field can be a single reference, or an array of references.

Provide either the name(s) of TrustManager object(s) defined in the heap, or specify the configuration object(s) inline.

You can specify either a single trust manager, as in "trustManager": "MyTrustManager", or an array of trust managers, as in "trustManager": [ "FirstTrustManager", "SecondTrustManager" ].

If you do not configure a trust manager, then the client uses only the default Java truststore. The default Java truststore depends on the Java environment. For example, $JAVA_HOME/lib/security/cacerts.

More information

org.forgerock.openig.handler.ReverseProxyHandlerHeaplet

Route

Routes are JSON-encoded configuration files that you add to IG to manage requests. You can add routes in the following ways:

Every route must call a handler to process requests and produce responses to requests.

When a route has a condition, it can handle only requests that meet the condition. When a route has no condition, it can handle any request.

Routes inherit settings from their parent configuration. This means that you can configure global objects in the config.json heap, for example, and then reference the objects by name in any other IG configuration.

For examples of route configurations see Routers and routes.

Usage

{
  "handler": Handler reference,
  "heap": [ object, ... ],
  "condition": runtime expression<boolean>,
  "name": string,
  "secrets": {
    "stores": [ SecretStore reference, ... ]
  }, //deprecated
  "session": AsyncSessionManager reference,
  "auditService": AuditService reference,
  "globalDecorators": map,
  "decorator name": Decorator object
}

(*)Deprecated

Properties

"handler": Handler reference, required

For this route, dispatch the request to this handler.

Provide either the name of a Handler object defined in the heap, or an inline Handler configuration object.

See also Handlers.

"heap": array of objects, optional

Heap object configuration for objects local to this route.

Objects referenced but not defined here are inherited from the parent.

You can omit an empty array. If you only have one object in the heap, you can inline it as the handler value.

See also Heap Objects.

"condition": runtime expression<boolean>, optional

A condition based on the request, context, or IG runtime environment, such as system properties or environment variables.

  • true: The request is dispatched to the route.

  • false: The condition for the next route in the configuration is evaluated.

  • No condition: the request is dispatched unconditionally to the route.

For debugging, log the routes for which IG evaluates a condition, and the route that matches a condition. Add the following line to a custom $HOME/.openig/config/logback.xml, and restart IG:

<logger name="org.forgerock.openig.handler.router.RouterHandler" level="trace" />

For information, see Managing logs.

For example conditions and requests that match them, see Example Conditions and Requests.

An external request can never match a condition that uses the reserved administrative route. Therefore, routes that use these conditions are effectively ignored. For example, if /openig is the administrative route, a route with the following condition is ignored: ${find(request.uri.path, '^/openig/my/path')}.

Default: ${true}

"name": string, optional

Route name.

The Router uses the name property to order the routes in the configuration. If the route does not have a name property, the Router uses the route ID.

The route ID is managed as follows:

  • When you add a route manually to the routes folder, the route ID is the value of the _id field. If there is no _id field, the route ID is the filename of the added route.

  • When you add a route through the Common REST endpoint, the route ID is the value of the mandatory _id field.

  • When you add a route through Studio, you can edit the default route ID.

    CAUTION: The filename of a route cannot be default.json. The route name property or route ID cannot be default.

Default: route ID

"secrets": SecretStore reference, optional
This property is deprecated; use SecretsProvider instead. For more information, refer to the Deprecated section of the Release Notes.

One or more secret stores, as defined in Secrets object and secret stores.

"session": AsyncSessionManager reference. reference, optional

Stateless session implementation for this route. Define an AuthenticatedEncryptedJwtSessionManager object inline or in the heap.

When a request enters the route, IG builds a new session object for the route. The session content is available to the route’s downstream handlers and filters. Session content available in the ascending configuration (a parent route or config.json) is not available in the new session.

When the response exits the route, the session content is serialized as a secure JWT that is encrypted and signed, and the resulting JWT string is placed in a cookie. Session information set inside the route is no longer available. The session references the previous session object.

Default: Do not change the session storage implementation.

For more information, see AsyncSessionManager, and Sessions.

"auditService": AuditService reference, optional

An audit service for the route. Provide either the name of an AuditService object defined in the heap, or an inline AuditService configuration object.

Default: No auditing of a configuration. The NoOpAuditService provides an empty audit service to the top-level heap and its child routes.

"globalDecorators": map, optional

A map of one or more data pairs with the format Map<String, JsonValue>, where:

  • The key is a decorator name

  • The value is a decorator configuration, passed as is to the decorator

The following format is required:

{
  "globalDecorators": {
    "decorator name": "decoration configuration",
    ...
  }
}

All compatible objects in a route are decorated with the mapped decorator value. For more information, refer to Decorators.

In the following example, the property decorates all compatible objects in the route with a capture and timer decorator:

"globalDecorators": {
  "capture": "all",
  "timer": true
}

Default: Empty

"decorator name": Decorator object, optional

Decorate the main handler of this route with a decorator referred to by the decorator name, and provide the configuration as described in Decorators.

Default: No decoration.

Route metrics at the Prometheus Scrape Endpoint

Route metrics at the Prometheus Scrape Endpoint have the following labels:

  • name: Route name, for example, My Route.

    If the router was declared with a default handler, then its metrics are published through the route named default.

  • route: Route identifier, for example, my-route.

  • router: Fully qualified name of the router, for example, gateway.main-router.

The following table summarizes the recorded metrics:

Name(1) Monitoring type Description

ig_route_request_active

Gauge

Number of requests being processed.

ig_route_request_total

Counter

Number of requests processed by the router or route since it was deployed.

ig_route_response_error_total

Counter

Number of responses that threw an exception.

ig_route_response_null_total

Counter

Number of responses that were not handled by IG.

ig_route_response_status_total

Counter

Number of responses by HTTP status code family. The family label depends on the HTTP status code:

  • Informational (1xx)

  • Successful (2xx)

  • Redirection (3xx)

  • Client_error (4xx)

  • Server_error (5xx)

  • Unknown (status code >= 600)

ig_route_response_time

Summary

A summary of response time observations.

(1)Metric names are deprecated and expected to be replaced with names ending in _total. The information provided by the metric is not deprecated. Other Prometheus metrics are not affected.

For more information about the the Prometheus Scrape Endpoint, see Prometheus Scrape Endpoint.

Route Metrics at the Common REST Monitoring Endpoint

Route metrics at the Common REST Monitoring Endpoint are published with an _id in the following pattern:

  • heap.router-name.route.route-name.metric

The following table summarizes the recorded metrics:

Name Monitoring type Description

request

Counter

Number of requests processed by the router or route since it was deployed.

request.active

Gauge

Number of requests being processed by the router or route at this moment.

response.error

Counter

Number of responses that threw an exception.

response.null

Counter

Number of responses that were not handled by IG.

response.status.client_error

Counter

Number of responses with an HTTP status code 400-499, indicating client error.

response.status.informational

Counter

Number of responses with an HTTP status code 100-199, indicating that they are provisional responses.

response.status.redirection

Counter

Number of responses with an HTTP status code 300-399, indicating a redirect.

response.status.server_error

Counter

Number of responses with an HTTP status code 500-599, indicating server error.

response.status.successful

Counter

Number of responses with an HTTP status code 200-299, indicating success.

response.status.unknown

Counter

Number of responses with an HTTP status code 600-699, indicating that a request failed and was not executed.

response.time

Timer

Time-series summary statistics.

For more information about the the Common REST Monitoring Endpoint, see Common REST Monitoring Endpoint.

Router

A handler that performs the following tasks:

  • Defines the routes directory and loads routes into the configuration.

  • Depending on the scanning interval, periodically scans the routes directory and updates the IG configuration when routes are added, removed, or changed. The router updates the IG configuration without needing to restart IG or access the route.

  • Manages an internal list of routes, where routes are ordered lexicographically by route name. If a route is not named, then the route ID is used instead. For more information, see Route.

  • Routes requests to the first route in the internal list of routes, whose condition is satisfied.

    Because the list of routes is ordered lexicographically by route name, name your routes with this in mind:

    • If a request satisfies the condition of more than one route, it is routed to the first route in the list whose condition is met.

    • Even if the request matches a later route in the list, it might never reach that route.

    If a request does not satisfy the condition of any route, it is routed to the default handler if one is configured.

The router does not have to know about specific routes in advance - you can configure the router first and then add routes while IG is running.

Studio deploys and undeploys routes through a main router named _router, which is the name of the main router in the default configuration. If you use a custom config.json, make sure it contains a main router named _router.

Usage

{
    "name": string,
    "type": "Router",
    "config": {
        "defaultHandler": Handler reference,
        "directory": configuration expression<string>,
        "scanInterval": configuration expression<duration>
    }
}

An alternative value for type is RouterHandler.

Properties

"defaultHandler": Handler reference, optional

Handler to use when a request does not satisfy the condition of any route.

Provide either the name of a handler object defined in the heap, or an inline handler configuration object.

Default: If no default route is set either here or in the route configurations, IG aborts the request with an internal error.

See also Handlers.

"directory": configuration expression<string>, optional

Directory from which to load route configuration files.

Default: The default directory for route configuration files, at $HOME/.openig(on Windows, appdata\OpenIG).

With the following example, route configuration files are loaded from /path/to/safe/routes instead of from the default directory:

{
  "type": "Router",
  "config": {
    "directory": "/path/to/safe/routes"
  }
}
If you define multiple routers, configure directory so that the routers load route configuration files from different directories.

An infinite route-loading sequence is triggered when a router starts a route that, directly or indirectly, starts another router, which then loads route configuration files from the same directory.

See also Expressions.

"scanInterval": configuration expression<duration>, optional

Time interval at which IG scans the specified directory for changes to routes. When a route is added, removed, or changed, the router updates the IG configuration without needing to restart IG or access the route.

When an integer is used for the scanInterval, the time unit is seconds.

To load routes at startup only, and prevent changes to the configuration if the routes are changed, set the scan interval to disabled.

Default: 10 seconds

Router metrics at the Prometheus Scrape Endpoint

Router metrics at the Prometheus Scrape Endpoint have the following labels:

  • fully_qualified_name: Fully qualified name of the router, for example, gateway.main-router.

  • heap: Name of the heap in which this router is declared, for example, gateway.

  • name: Simple name declared in router configuration, for example, main-router.

The following table summarizes the recorded metrics:

Name Monitoring type Description

ig_router_deployed_routes

Gauge

Number of routes deployed in the configuration.

For more information about the the Prometheus Scrape Endpoint, see Prometheus Scrape Endpoint.

Router metrics at the Common REST Monitoring Endpoint

Router metrics at the Common REST Monitoring Endpoint are JSON objects, with the following form:

  • [heap name].[router name].deployed-routes

The following table summarizes the recorded metrics:

Name Monitoring type Description

deployed-routes

Gauge

Number of routes deployed in the configuration.

For more information about the the Common REST Monitoring Endpoint, see Common REST Monitoring Endpoint.

More information

org.forgerock.openig.handler.router.RouterHandler

SamlFederationHandler

A handler to play the role of SAML 2.0 Service Provider (SP).

Consider the following requirements for SamlFederationHandler:

  • This handler does not support filtering; do not use it as the handler for a chain, which can include filters.

  • Do not use this handler when its use depends on something in the response. The response can be handled independently of IG, and can be null when control returns to IG. For example, do not use this handler in a SequenceHandler where the postcondition depends on the response.

  • Requests to the SamlFederationHandler must not be rebased, because the request URI must match the endpoint in the SAML metadata.

SAML in deployments with multiple instances of IG

IG uses a Java fedlet to implement SAML. When IG acts as a SAML service provider, the session information is stored in the fedlet, not the session cookie. In deployments that use multiple instances of IG as a SAML service provider, it is therefore necessary to set up sticky sessions so that requests always hit the instance where the SAML interaction was started.

For information, refer to Session state considerations in AM’s SAML v2.0 guide.

Usage

{
    "name": string,
    "type": "SamlFederationHandler",
    "config": {
        "assertionMapping": map or configuration expression<map>,
        "redirectURI": configuration expression<url>,
        "secretsProvider": SecretsProvider reference,
        "assertionConsumerEndpoint": configuration expression<url>,
        "authnContext": configuration expression<string>,
        "authnContextDelimiter": configuration expression<string>,
        "logoutURI": configuration expression<url>,
        "sessionIndexMapping": configuration expression<string>,
        "singleLogoutEndpoint": configuration expression<url>,
        "singleLogoutEndpointSoap": configuration expression<url>,
        "SPinitiatedSLOEndpoint": configuration expression<url>,
        "SPinitiatedSSOEndpoint": configuration expression<url>,
        "useOriginalUri": configuration expression<boolean>,
        "subjectMapping": configuration expression<string>
    }
}

Properties

"assertionMapping": map or configuration expression<map>, required

A map with the format Map<String, String>, where:

  • Key: Session name, localName

  • Value: SAML assertion name, incomingName, or a configuration expression that evaluates to the name

The following formats are allowed:

{
  "assertionMapping": {
    "string": "configuration expression<string>",
    ...
  }
}
{
  "assertionMapping": "configuration expression<map>"
}

In the following example, the session names username and password are mapped to SAML assertion names mail and mailPassword :

{
  "assertionMapping": {
    "username": "mail",
    "password": "mailPassword"
  }
}

If an incoming SAML assertion contains the following statement:

mail = demo@example.com
mailPassword = demopassword

Then the following values are set in the session:

username = demo@example.com
password = demopassword

For this to work, edit the <Attribute name="attributeMap"> element in the SP extended metadata file, $HOME/.openig/SAML/sp-extended.xml, so that it matches the assertion mapping configured in the SAML 2.0 Identity Provider (IDP) metadata.

Because the dot character (.) serves as a query separator in expressions, do not use dot characters in the localName.

To prevent different handlers from overwriting each others' data, use unique localName settings when protecting multiple service providers.

"redirectURI": configuration expression<url>, required

The page that the filter used to HTTP POST a login form recognizes as the login page for the protected application.

This is how IG and the Federation component work together to provide SSO. When IG detects the login page of the protected application, it redirects to the Federation component. Once the Federation handler validates the SAML exchanges with the IDP, and sets the required session attributes, it redirects back to the login page of the protected application. This allows the filter used to HTTP POST a login form to finish the job by creating a login form to post to the application based on the credentials retrieved from the session attributes.

"secretsProvider": SecretsProvider reference, optional

The SecretsProvider object to query for keys when AM provides signed or encrypted SAML assertions.

When this property is not set, the keys are provided by direct keystore look-ups based on entries in the SP extended metadata file, sp-extended.xml.

For more information, refer to SecretsProvider.

Default: Empty.

"assertionConsumerEndpoint": configuration expression<string>, optional

Default: fedletapplication (same as the Fedlet)

If you modify this attribute, change the metadata to match.

"authnContext": configuration expression<string>, optional

Name of the session field to hold the value of the authentication context. Because the dot character (.) serves as a query separator in expressions, do not use dot characters in the field name.

Use this setting when protecting multiple service providers, as the different configurations must not map their data into the same fields of session. Otherwise different handlers can overwrite each others' data.

As an example, if you set "authnContext": "myAuthnContext", then IG sets session.myAuthnContext to the authentication context specified in the assertion. When the authentication context is password over protected transport, then this results in the session containing "myAuthnContext": "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport".

Default: map to session.authnContext

"authnContextDelimiter": configuration expression<string>, optional

The authentication context delimiter used when there are multiple authentication contexts in the assertion.

Default: |

"logoutURI": configuration expression<string>, optional

Set this to the URI to visit after the user is logged out of the protected application.

You only need to set this if the application uses the single logout feature of the Identity Provider.

"sessionIndexMapping": configuration expression<string>, optional

Name of the session field to hold the value of the session index. Because the dot character (.) serves as a query separator in expressions, do not use dot characters in the field name.

Use this setting when protecting multiple service providers, as the different configurations must not map their data into the same fields of session. Otherwise different handlers can overwrite each others' data.

As an example, if you set "sessionIndexMapping": "mySessionIndex", then IG sets session.mySessionIndex to the session index specified in the assertion. This results in the session containing something like "mySessionIndex": "s24ccbbffe2bfd761c32d42e1b7a9f60ea618f9801".

Default: map to session.sessionIndex

"singleLogoutEndpoint": configuration expression<string>, optional

Default: fedletSLORedirect (same as the Fedlet)

If you modify this attribute, change the metadata to match.

"singleLogoutEndpointSoap": configuration expression<string>, optional

Default: fedletSloSoap (same as the Fedlet)

If you modify this attribute, change the metadata to match.

"SPinitiatedSLOEndpoint": configuration expression<string>, optional

Default: SPInitiatedSLO

If you modify this attribute, change the metadata to match.

"SPinitiatedSSOEndpoint": configuration expression<string>, optional

Default: SPInitiatedSSO

If you modify this attribute, change the metadata to match.

"useOriginalUri": configuration expression<boolean>, optional

When true, use the original URI instead of a rebased URI when validating RelayState and Assertion Consumer Location URLs. Use this property if a baseUri decorator is used in the route or in config.json.

Default: false

"subjectMapping": configuration expression<string>, optional

Name of the session field to hold the value of the subject name. Because the dot character (.) serves as a query separator in expressions, do not use dot characters in the field name.

Use this setting when protecting multiple service providers, as the different configurations must not map their data into the same fields of session. Otherwise different handlers can overwrite each others' data.

As an example, if you set "subjectMapping": "mySubjectName", then IG sets session.mySubjectName to the subject name specified in the assertion. If the subject name is an opaque identifier, then this results in the session containing something like "mySubjectName": "vtOk+APj1s9Rr4yCka6V9pGUuzuL".

Default: map to session.subjectName

Example

For an example of how to set up IG as a SAML service provider, refer to SAML.

In the following example, IG receives a SAML 2.0 assertion from the IDP, and then logs the user in to the protected application using the username and password from the assertion:

{
    "name": "SamlFederationHandler",
    "type": "SamlFederationHandler",
    "config": {
        "assertionMapping": {
            "username": "mail",
            "password": "mailPassword"
        },
        "redirectURI": "/login",
        "logoutURI": "/logout"
    }
}

More information

org.forgerock.openig.handler.saml.SamlFederationHandler

ScriptableHandler

Creates a response to a request by executing a script.

Scripts must return either a Promise<Response, NeverThrowsException> or a Response.

This section describes the usage of ScriptableHandler. For information about script properties, available global objects, and automatically imported classes, see Scripts.

Usage

{
    "name": string,
    "type": "ScriptableHandler",
    "config": {
        "type": configuration expression<string>,
        "file": configuration expression<string>, // Use either "file"
        "source": [ string, ... ],                // or "source", but not both
        "args": map,
        "clientHandler": Handler reference
    }
}

Properties

For information about properties for ScriptableHandler, see Scripts.

More information

org.forgerock.openig.handler.ScriptableHandler

SequenceHandler

Processes a request through a sequence of handlers and post conditions, as follows:

  • A request is treated by handler1, and then postcondition1 is evaluated.

  • If postcondition1 is true, the request is then treated by handler2, and so on.

{
  "handler": handler1,
  "postcondition": expression1
},
{
  "handler": handler2,
  "postcondition": expression2
},
...

Use this handler for multi-request processing, such as retrieving a form, extracting form content (for example, a nonce), and then submitting it in a subsequent request.

Usage

{
    "name": string,
    "type": "SequenceHandler",
    "config": {
        "bindings": [
            {
                "handler": Handler reference,
                "postcondition": runtime expression<boolean>
            }
        ]
    }
}

Properties

"bindings": array of objects, required

A list of handler and postcondition bindings.

"handler": Handler reference, required

The handler to dispatch the request to when it is the first handler in the bindings, or for subsequent handlers when their previous postcondition yields true.

Provide the name of a handler heap object, or an inline handler configuration object.

"postcondition": runtime expression<boolean>, optional

A flag to indicate that a post condition is met:

  • true: The request is dispatched to the next handler in bindings.

  • false: The sequence stops.

Postconditions are defined using IG expressions, as described in Expressions.

Default: ${true}

More information

org.forgerock.openig.handler.SequenceHandler

StaticResponseHandler

Creates a response to a request statically, or based on something in the context.

Usage

{
  "name": string,
  "type": "StaticResponseHandler",
  "config": {
    "status": configuration expression<number>,
    "reason": configuration expression<string>,
    "headers": {
       configuration expression<string>: [ runtime expression<string>, ... ], ...
    },
    "trailers": {
       configuration expression<string>: [ runtime expression<string>, ... ], ...
    },
    "entity": runtime expression<string>
  }
}

Properties

"status": Status object

The response status. For more information, refer to Status.

"reason": configuration expression<string>, optional

Used only for custom HTTP status codes. For more information, refer to Response Status Codes and Status Code Registry.

"headers": map, optional

One or more headers to set for a response, with the format name: [ value, …​ ], where:

  • name is a configuration expression<string> for a header name. If multiple expressions resolve to the same final string, name has multiple values.

  • value one or more a runtime expression<strings> for header values.

When the property entity is used, set a Content-Type header with the correct content type value. The following example sets the content type of a message entity in the response:

"headers": {
  "Content-Type": [ "text/html; charset=UTF-8" ]
}

The following example is used in 05-federate.json to redirect the original URI from the request:

"headers": {
  "Location": [
     "http://sp.example.com:8080/saml/SPInitiatedSSO"
  ]
}

Default: Empty

"trailers": map, optional

One or more trailers to set for a response, with the format name: [ value, …​ ], where:

  • name is a configuration expression<string> for a trailer name. If multiple expressions resolve to the same string, name has multiple values.

    The following trailer names are not allowed:

    • Message framing headers (for example, Transfer-Encoding and Content-Length)

    • Routing headers (for example, Host)

    • Request modifiers (for example, controls and conditionals such as Cache-Control, Max-Forwards, and TE)

    • Authentication headers (for example, Authorization and Set-Cookie)

    • Content-Encoding

    • Content-Type

    • Content-Range

    • Trailer

  • value is one or more runtime expression<strings> for trailer values.

Default: Empty

"entity": runtime expression<string>, optional

The message entity body to include in a response.

If a Content-Type header is present, the entity must conform to the header and set the content length header automatically.

Methods are provided for accessing the entity as byte, string, or JSON content. For information, refer to Entity.

Attackers during reconnaissance can use response messages to identify information about a deployment. For security, limit the amount of information in messages, and avoid using words that help identify IG.

Default: Empty

Example

{
  "name": "ErrorHandler",
  "type":"StaticResponseHandler",
  "config": {
    "status": 500,
    "headers": {
      "Content-Type": [ "text/html; charset=UTF-8" ]
    },
    "entity": "<html><h2>Epic #FAIL</h2></html>"
  }
}

More information

org.forgerock.openig.handler.StaticResponseHandler

Copyright © 2010-2023 ForgeRock, all rights reserved.