About Web Agent

Web Agent is an AM add-on component that operates as a Policy Enforcement Point (PEP) or policy agent for applications deployed in a web server.

Web Agents intercept inbound requests to applications. Depending on the filter mode configuration, Web Agents interact with AM to:

Ensure that clients provide appropriate authentication.
Enforce AM resource-based policies.

For information about how to enforce user authentication only, refer to SSO-only mode.

This chapter covers how Web Agent works and how it protects applications.

Agent components

Web Agent includes the following main components:

Agent Modules: Intercepts and processes inbound requests to protected resources.
Native Shared Libraries: Enables agents to interact with AM.
Agent Profile: The agent profile is not strictly part of Web Agent, but plays an important part in the agent operation. It contains a set of configuration properties that define the agent behavior.

The following image shows the Web Agent components when the agent profile is stored in the AM configuration store:

Agent configuration

Web Agent configuration properties decide the behavior of the agent.

Configuration location

AM stores configuration properties either centrally or in local configuration files.

Centralized configuration

When the agent is operating in centralized configuration mode its configuration is stored in the AM configuration store. Storing the agent configuration centrally allows you to configure your agents using the AM admin UI, the ssoadm command, and the REST API.

To access the centralized web agent configuration, on the AM admin UI go to Realms > Realm Name > Applications > Agents > Web > Agent Name.

Configure properties that aren’t present in the AM admin UI as custom properties, on the Advanced tab of the console. For a list of property names, refer to the Properties reference.

When properties and value pairs are defined as custom properties, they take precedence for that property. To prevent configuration errors, if a property is present in the AM admin UI don’t configure it as a custom property.

For information about creating centrally-stored agent profiles, refer to Create agent profiles.

Local configuration

When the agent is operating in local configuration mode the agent bootstrap properties, configuration properties, and password are stored in local files created by the installer.

Configuration files

Web Agent uses the configuration files described in this section. For information about agent properties, refer to the Properties reference.

`agent-password.conf`

AES-256-GCM encrypted password properties, including the agent profile password, stored at /path/to/web_agents/agent_type/instances/agent_n/config/agent-password.conf.

#------------------------------------------------------------------------------
# Web Agents Passwords
...
#------------------------------------------------------------------------------
com.sun.identity.agents.config.password = AM_AGENT_PASSWORD
com.forgerock.agents.config.cert.key.password = AM_SSL_PASSWORD
com.sun.identity.agents.config.forward.proxy.password = AM_PROXY_PASSWORD

`agent-key.conf`

The key to decrypt the agent password in agent-password.conf, stored at /path/to/web_agents/agent_type/instances/agent_n/config/agent-key.conf.

#------------------------------------------------------------------------------
# Web Agents Encryption Key
...
#------------------------------------------------------------------------------
com.sun.identity.agents.config.key = AM_AGENT_KEY

`AgentConfiguration.properties`

Bootstrap and configuration settings, stored at /path/to/web_agents/agent_type/instances/agent_n/config/agent.conf.

To manage the configuration, edit AgentConfiguration.properties manually. The AgentConfiguration.properties file can’t be updated using the AM admin UI, the ssoadm command, or the REST API.

The AgentConfiguration.properties file must contain at least the following properties:

# Bootstrap properties
com.sun.identity.agents.config.organization.name = AM_AGENT_REALM
com.sun.identity.agents.config.username = AM_AGENT_NAME
com.sun.identity.agents.config.naming.url = AM_OPENAM_URL

# Configuration properties
com.sun.identity.agents.config.repository.location = local
org.forgerock.openam.agents.config.jwt.name = am-auth-jwt
com.sun.identity.agents.config.cdsso.redirect.uri = agent/cdsso-oauth2
org.forgerock.openam.agents.config.policy.evaluation.application = iPlanetAMWebAgentService
org.forgerock.openam.agents.config.policy.evaluation.realm = /
com.sun.identity.agents.config.polling.interval = 180
com.sun.identity.agents.config.sso.cache.polling.interval = 60
com.sun.identity.agents.config.policy.cache.polling.interval = 60
com.sun.identity.agents.config.cookie.name = iPlanetDirectoryPro
com.sun.identity.agents.config.debug.file.size = 0
com.sun.identity.agents.config.local.logfile = AM_DEBUG_FILE_PATHdebug.log
com.sun.identity.agents.config.local.audit.logfile = AM_AUDIT_FILE_PATHaudit.log
com.sun.identity.agents.config.debug.level = error

Request process flow

When a client requests access to an application resource, the Web Agent intercepts the request. AM then validates the identity of the client, and their authorization to access the protected resource.

The following simplified data flow occurs when an unauthenticated client requests a resource protected by a Web Agent and AM. The flow assumes that requests must meet the requirements of an AM policy. For a detailed diagram, refer to Single sign-on in AM’s Authentication and SSO guide.

FQDN check

When FQDN checking is enabled, the agent can redirect requests to different domains, depending on the hostname of the request. Learn more from FQDN checks.

Not-enforced rules check

The agent evaluates whether the requested resource or the client IP address matches a not-enforced rule.

Alternate flow. The requested resource or the client IP address matches a not-enforced rule. The agent allows access to the resource.
Alternate flow. The client receives a response from www.example.com. The flow ends.
The requested resource or the client IP address does not match a not-enforced rule. The agent redirects the client to log in to AM.

Learn more from Not-enforced rules.

Authentication

1-2: The client authenticates to AM.

During client authentication, and to protect against reply attacks, the agent issues a pre-authentication cookie, named agent-authn-tx. The agent uses the cookie to track the authentication request to AM, and deletes it immediately after authentication.

Depending on the configuration, the agent can either issue a single cookie to track all concurrent authentication requests, or one cookie for each request.

The pre-authentication cookie expires after 5 minutes, or after the time specified in Profile Attributes Cookie Maxage.

If POST data preservation is enabled, the request expires after the time specified in POST Data Entries Cache Period, which is by default 10 minutes. In this case, consider increasing Profile Attributes Cookie Maxage to at least 10 minutes.

3: AM’s authentication service verifies the client credentials and creates a valid OIDC JWT, with session information.

4: AM sends the client a self-submitting form with the OIDC JWT.

5: The client posts the self-submitting form to the agent endpoint, and the Web Agent consumes it.

6: The agent contacts AM to validate the session contained in the ID token.

7: AM validates the session.

Authorization

1: The agent contacts AM’s policy service, requesting a decision about whether the client is authorized to access the resource.

2: AM’s policy service returns ALLOW.

3: The agent writes the policy decision to the audit log.

4: The agent enforces the policy decision. Because the Policy Service returned ALLOW, the agent performs a pass-through operation to return the resource to the client.

5: The client accesses the resource.

Realms

Agent profile realm

The agent profile realm is the AM realm in which the agent profile is stored. The agent profile stores a set of configuration properties that define the behavior of the agent.

During agent installation, the installer prompts for the agent profile realm, and populates the property Agent Profile Realm in the bootstrap properties file. By default, the agent profile realm is set to the top-level realm.

The agent profile realm can be different to the user realm and policy evaluation realm. Groups of agents can use the same agent profile realm, which can be separate from the user realm and policy evaluation realm.

For information about creating agent profiles in the top-level realm or other realms, refer to Create agent profiles.

Policy evaluation realm

The policy evaluation realm is the realm that the agent uses to request policy decisions from AM. In most circumstances, the policy evaluation realm is the same as the user realm.

The policy evaluation realm is configured by Policy Evaluation Realm, and defaults to the top-level realm. The policy set to use is configured by Policy Set.

In AM, only the top-level realm has a default policy set, called iPlanetAMWebAgentService. If you use a policy evaluation realm that is in a subrealm of the top-level realm, you must also define a policy set and policies in the equivalent realm in AM.

User realm

The user realm is the realm in which a user is authenticated. In most circumstances, the user evaluation realm is the same as the policy evaluation realm.

By default, users authenticate to AM in the top-level realm, however, the agent can authenticate users in different realms depending on the request domain, path, or resource.

When a user logs out, the agent maintains the user realm. The agent obtains the realm info from the JWT, if one is available, or by calling sessioninfo. When the user logs out, the stored realm is passed to the logout endpoint automatically.

The first time an authenticated user requests a resource from the agent, the agent establishes the user realm from the session. It permanently associates the realm with the session in the session cache. When the session ends, the agent automatically passes the realm to the logout endpoint.

For more information about changing the user realm, refer to Login redirect.

Sessions

On startup, Web Agent uses the following properties to obtain a session from AM:

The agent session lifetime is defined by the AM version and configuration, and is essentially indefinite.

For the security of your deployment, set the agent session lifetime as described in Manage Web Agent sessions.

If you clear agent sessions in the AM admin UI, you can accidentally kill an active agent session. If this happens, the agent detects that its session has expired and automatically obtains a new one.

Web Agents 2024.6