A directory resembles a dictionary or a phone book. If you know a word, you can look up its entry in the dictionary to learn its definition or its pronunciation. If you know a name, you can look up its entry in the phone book to find the telephone number and street address associated with the name. If you are bored, curious, or have lots of time, you can also read through the dictionary, phone book, or directory, entry after entry.
Where a directory differs from a paper dictionary or phone book is in how entries are indexed. Dictionaries typically have one index, which is words in alphabetical order. Phone books, have one index as well, which is names in alphabetical order. Directories' entries, however, are often indexed for multiple attributes, including names, user identifiers, email addresses, and telephone numbers. This means you can look up a directory account by the user’s name, their user identifier, their email address, or their telephone number, for example.
ForgeRock Directory Services are based on the Lightweight Directory Access Protocol (LDAP). Nearly all of what follows is an introduction to LDAP.
ForgeRock Directory Services also provide RESTful HTTP access to directory data. As a directory user, you will find it useful to understand the underlying LDAP model even if most users are accessing the directory over HTTP rather than LDAP.
Phone companies have been managing directories for many decades. The Internet itself has relied on distributed directory services like DNS since the mid 1980s.
It was not until the late 1980s, however, that experts from what is now the International Telecommunications Union published the X.500 set of international standards, including Directory Access Protocol. The X.500 standards specify Open Systems Interconnect (OSI) protocols and data definitions for general purpose directory services. The X.500 standards were designed to meet the needs of systems built according to the X.400 standards, covering electronic mail services.
Lightweight Directory Access Protocol has been around since the early 1990s. LDAP was originally developed as an alternative protocol that would allow directory access over Internet protocols rather than OSI protocols, and be lightweight enough for desktop implementations. By the mid-1990s, LDAP directory servers became generally available and widely used.
Until the late 1990s, LDAP directory servers were designed primarily with quick lookups and high availability for lookups in mind. LDAP directory servers replicate data. When an update is made, that update is applied to other peer directory servers. Thus, if one directory server goes down, lookups can continue on other servers. Furthermore, if a directory service needs to support more lookups, the administrator can simply add another directory server to replicate with its peers.
As organizations rolled out larger and larger directories serving more and more applications, they discovered the need for high availability and fast updates. Around the year 2000, directories began to support multi-master replication; that is, replication with multiple read-write servers. The organizations with the very largest directories became concerned about replicating so many changes.
The DS code base began in the mid-2000s, when engineers solving the update performance issue decided that the cost of adapting the existing C-based directory technology for high-performance updates would be higher than the cost of building new, high-performance directory using Java technology.
LDAP directory data is organized into entries, similar to the entries for words in the dictionary, or for subscriber names in the phone book:
dn: uid=bjensen,ou=People,dc=example,dc=com uid: bjensen cn: Babs Jensen cn: Barbara Jensen facsimileTelephoneNumber: +1 408 555 1992 gidNumber: 1000 givenName: Barbara homeDirectory: /home/bjensen l: San Francisco mail: firstname.lastname@example.org objectClass: inetOrgPerson objectClass: organizationalPerson objectClass: person objectClass: posixAccount objectClass: top ou: People ou: Product Development roomNumber: 0209 sn: Jensen telephoneNumber: +1 408 555 1862 uidNumber: 1076
Barbara Jensen’s entry has a number of attributes, such as
telephoneNumber: +1 408 555 1862,
objectClass attribute type indicates which types of attributes are required and allowed for the entry.
As the entries object classes can be updated online, and even the definitions of object classes and attributes
are expressed as entries that can be updated online, directory data is extensible on the fly.)
When you look up her entry in the directory, you specify one or more attributes and values to match.
The directory server then returns entries with attribute values that match what you specified.
The attributes you search for are indexed in the directory, so the directory server can retrieve them more quickly. Attribute values are not necessarily strings. Some attribute values, like certificates and photos, are binary.
Each entry also has a unique identifier, shown at the top of the entry,
DN is an acronym for Distinguished Name.
No two entries in the directory have the same distinguished name.
DNs are typically composed of case-insensitive attributes.
Sometimes distinguished names include characters that you must escape. The following example shows an entry that includes escaped characters in the DN:
$ ldapsearch \ --hostname localhost \ --port 1636 \ --useSsl \ --usePkcs12TrustStore /path/to/opendj/config/keystore \ --trustStorePassword:file /path/to/opendj/config/keystore.pin \ --baseDN dc=example,dc=com \ "(uid=escape)" dn: cn=DN Escape Characters \" # \+ \, \; \< = \> \\,dc=example,dc=com objectClass: person objectClass: inetOrgPerson objectClass: organizationalPerson objectClass: top givenName: DN Escape Characters uid: escape cn: DN Escape Characters " # + , ; < = > \ sn: " # + , ; < = > \ mail: email@example.com
PS C:\path\to> ldapsearch ` --hostname localhost ` --port 1636 ` --useSsl ` --usePkcs12TrustStore /path/to/opendj/config/keystore ` --trustStorePassword:file /path/to/opendj/config/keystore.pin ` --baseDN dc=example,dc=com ` "(uid=escape)" dn: cn=DN Escape Characters \" # \+ \, \; \< = \> \\,dc=example,dc=com objectClass: person objectClass: inetOrgPerson objectClass: organizationalPerson objectClass: top givenName: DN Escape Characters uid: escape cn: DN Escape Characters " # + , ; < = > \ sn: " # + , ; < = > \ mail: firstname.lastname@example.org
LDAP entries are arranged hierarchically in the directory.
The hierarchical organization resembles a file system on a PC or a web server,
often imagined as an upside down tree structure, or a pyramid.
The distinguished name consists of components separated by commas,
The names are little-endian. The components reflect the hierarchy of directory entries.
Barbara Jensen’s entry is located under an entry with DN
an organizational unit and parent entry for the people at Example.com.
ou=People entry is located under the entry with DN
dc=example,dc=com, the base entry for Example.com.
DC is an acronym for Domain Component.
The directory has other base entries, such as
cn=config, under which the configuration is accessible through LDAP.
A directory can serve multiple organizations, too.
You might find
o=myOrganization in the same LDAP directory.
Therefore, when you look up entries, you specify the base DN to look under in the same way
you need to know whether to look in the New York, Paris, or Tokyo phone book to find a telephone number.
The root entry for the directory, technically the entry with DN
"" (the empty string), is called the root DSE.
It contains information about what the server supports, including the other base DNs it serves.
A directory server stores two kinds of attributes in a directory entry:
user attributes and operational attributes.
User attributes hold the information for users of the directory.
All attributes shown in the entry above are user attributes.
Operational attributes hold information used by the directory itself.
Examples of operational attributes include
When an LDAP search operation finds an entry in the directory, the directory server returns all the visible user attributes unless the search request restricts the list of attributes by specifying those attributes explicitly. The directory server does not, however, return any operational attributes unless the search request specifically asks for them.
Generally speaking, applications should change only user attributes,
and leave updates of operational attributes to the server,
relying on public directory server interfaces to change server behavior.
An exception is access control instruction (
which are operational attributes used to control access to directory data.
In some client/server applications, like web browsing, a connection is set up and torn down for each client request.
LDAP has a different model. In LDAP, the client application connects to the server and authenticates. The client then requests any number of operations, perhaps processing results in between requests. The client finally disconnects when done, potentially days later.
The standard operations are as follows:
- Bind (authenticate)
The first operation in an LDAP session usually involves the client binding to the LDAP server w ith the server authenticating the client. Authentication identifies the client’s identity in LDAP terms, the identity which is later used by the server to authorize (or not) access to directory data that the client wants to lookup or change.
If the client does not bind explicitly, the server treats the client as an anonymous client. An anonymous client is allowed to do anything that can be done anonymously. What can be done anonymously depends on access control and configuration settings. The client can also bind again on the same connection.
- Search (lookup)
After binding, the client can request that the server return entries based on an LDAP filter, which is an expression that the server uses to find entries that match the request, and a base DN under which to search. For example, to look up all entries for people with the email address
email@example.com data for Example.com, you would specify a base DN such as
ou=People,dc=example,dc=comand the filter
After binding, the client can request that the server compare an attribute value that the client specifies with the value stored on an entry in the directory.
After binding, the client can request that the server change one or more attribute values on an entry. Often administrators do not allow clients to change directory data, so allow appropriate access for client application if they have the right to update data.
After binding, the client can request to add one or more new LDAP entries to the server.
After binding, the client can request that the server delete one or more entries. To delete an entry with other entries underneath, first delete the children, then the parent.
- Modify DN
After binding, the client can request that the server change the distinguished name of the entry. In other words, this renames the entry or moves it to another location. For example, if Barbara changes her unique identifier from
bjensento something else, her DN would have to change. For another example, if you decide to consolidate
ou=Peopleinstead, all the entries underneath must change distinguished names.
Renaming entire branches of entries can be a major operation for the directory, so avoid moving entire branches if you can.
When done making requests, the client can request an unbind operation to end the LDAP session.
When a request seems to be taking too long to complete, or when a search request returns many more matches than desired, the client can send an abandon request to the server to drop the operation in progress.
LDAP has standardized two mechanisms for extending the operations directory servers can perform beyond the basic operations listed above. One mechanism involves using LDAP controls. The other mechanism involves using LDAP extended operations.
LDAP controls are information added to an LDAP message to further specify how an LDAP operation should be processed. For example, the Server-Side Sort request control modifies a search to request that the directory server return entries to the client in sorted order. The Subtree Delete request control modifies a delete request so the server also removes child entries of the entry targeted for deletion.
One special search operation that DS servers support is Persistent Search. The client application sets up a Persistent Search to continue receiving new results whenever changes are made to data that is in the scope of the search, using the search as a form of change notification. Persistent Searches are intended to remain connected permanently, though they can be idle for long periods of time.
The directory server can also send response controls in some cases to indicate that the response contains special information. Examples include responses for entry change notification, password policy, and paged results.
For the list of supported LDAP controls, see Supported LDAP controls.
LDAP extended operations are additional LDAP operations not included in the original standard list. For example, the Cancel Extended Operation works like an abandon operation, but finishes with a response from the server after the cancel is complete. The StartTLS Extended Operation allows a client to connect to a server on an unsecure port, then starts Transport Layer Security negotiations to protect communications.
For the list of supported LDAP extended operations, see Supported LDAP extended operations.
Directories have indexes for multiple attributes. By default, DS does not let normal users perform searches that are not indexed, because such searches mean DS servers have to scan an entire directory database when looking for matches.
As directory administrator, part of your responsibility is making sure directory data is properly indexed. DS software provides tools for building and rebuilding indexes, for verifying indexes, and for evaluating how well indexes are working.
For help better understanding and managing indexes, read Indexes.
Some databases are designed to hold huge amounts of data for a particular application. Although such databases can support multiple applications, data organization depends on the applications served.
In contrast, directories are designed for shared, centralized services. Although the first guides to deploying directory services suggested taking inventory of all the applications that would access the directory, today many directory administrators do not even know how many applications use their services. The shared, centralized nature of directory services fosters interoperability in practice. It has helped directory services be successful in the long term.
Part of what makes this possible is the shared model of directory user information, in particular the LDAP schema. LDAP schema defines what the directory can contain. This means that directory entries are not arbitrary data, but tightly codified objects whose attributes are completely predictable from publicly readable definitions. Many schema definitions are in fact standard. They are the same not just across a directory service but across different directory services.
At the same time, unlike some databases, LDAP schema and the data it defines
can be extended on the fly while the service is running.
LDAP schema is accessible over LDAP.
One attribute of every entry is its set of
This gives you as administrator great flexibility in adapting your directory service
to store new data without losing or changing the structure of existing data,
and without ever stopping your directory service.
For a closer look, see LDAP schema.
Directory services support fine-grained access control.
As directory administrator, you can control who has access to what data when, how, where and under what conditions by using access control instructions (ACI). You can allow some directory operations and not others. You can scope access control from the whole directory service down to individual attributes on directory entries. You can specify when, from what host or IP address, and the encryption strength required for an operation.
As ACIs are stored on entries in the directory, you can update access controls while the service is running, and even delegate that control to client applications. DS software combines the strengths of ACIs with separate administrative privileges to help you secure access to directory data.
For more information, read Access control.
DS replication consists of copying each update to the directory service to multiple directory servers. This brings both redundancy, in the case of network partitions or of crashes, and scalability for read operations. Most directory deployments involve multiple servers replicating together.
When you have replicated servers, all of which are writable, you can have replication conflicts. What if, for example, there is a network outage between two replicas, and meanwhile two different values are written to the same attribute on the same entry on the two replicas?
In nearly all cases, DS replication can resolve these situations automatically without involving you, the directory administrator. This makes your directory service resilient and safe even in the unpredictable real world.
One counterintuitive aspect of replication is that although you add directory read capacity by adding replicas to your deployment, you do not add directory write capacity by adding replicas. Each write operation must be replayed everywhere. As a result, if you have N servers, you have N write operations to replay.
Replication is also loosely consistent. Loosely consistent means that directory data will eventually converge to be the same everywhere, but it will not necessarily be the same everywhere at all times, or even at any time. Client applications sometimes get this wrong when they write to a pool of load balanced directory servers, immediately read back what they wrote, and are surprised that it is not the same. If your users are complaining about this, consider using a directory proxy server to mitigate their poor practices.
Directory Services Markup Language (DSMLv2) v2.0 became a standard in 2001. DSMLv2 describes directory data and basic directory operations in XML format, so they can be carried in Simple Object Access Protocol (SOAP) messages. DSMLv2 further allows clients to batch multiple operations together in a single request, to be processed either in sequential order or in parallel.
DS software provides support for DSMLv2 as a DSML gateway, which is a servlet that connects to any standard LDAPv3 directory. DSMLv2 opens basic directory services to SOAP-based web services and service oriented architectures.
To set up DSMLv2 access, see Install a DSML gateway.
DS software can expose directory data as JSON resources over HTTP to REST clients, providing easy access to directory data for developers who are not familiar with LDAP. RESTful access depends on a configuration that describes how the JSON representation maps to LDAP entries.
Although client applications have no need to understand LDAP, the underlying implementation still uses the LDAP model for its operations. The mapping adds some overhead.
Furthermore, depending on the configuration, individual JSON resources can require multiple LDAP operations.
For example, an LDAP user entry represents
manager as a DN (of the manager’s entry).
The same manager might be represented in JSON as an object holding the manager’s user ID and full name,
in which case the software must look up the manager’s entry
to resolve the mapping for the manager portion of the JSON resource, in addition to looking up the user’s entry.
As another example, suppose a large group is represented in LDAP as a set of 100,000 DNs.
If the JSON resource is configured so that a member is represented by its name,
then listing that resource would involve 100,000 LDAP searches to translate DNs to names.
A primary distinction between LDAP entries and JSON resources is that LDAP entries hold sets of attributes values,
whereas JSON resources are documents containing arbitrarily nested objects.
As LDAP data is governed by schema, almost no LDAP objects are arbitrary collections of data.
(LDAP has the object class
extensibleObject, but its should be used sparingly.)
JSON resources can hold arrays, ordered collections that can contain duplicates.
LDAP attributes are sets, unordered collections without duplicates.
For most directory and identity data, these distinctions do not matter.
You are likely to run into them, however,
if you try to turn your directory into a document store for arbitrary JSON resources.
Despite some extra cost in terms of system resources, exposing directory data over HTTP can unlock directory services for a new generation of applications. The configuration provides flexible mapping, so that you can configure views that correspond to how client applications need to see directory data.
DS software also give you a deployment choice for HTTP access. You can deploy the REST to LDAP gateway, which is a servlet that connects to any standard LDAPv3 directory, or you can activate the HTTP connection handler on a server to allow direct and more efficient HTTP and HTTPS access.
This page serves as an introduction. When you have understood enough of the concepts to build the directory services that you want to deploy, you must still build a prototype and test it before you roll out shared, centralized services for your organization.
Start with Deployment when beginning your project.