rebuild-index
rebuild-index — rebuild index after configuration change
Options
The rebuild-index command takes the following options:
Command options:
-b | --baseDn {baseDN}-
Base DN of a backend supporting indexing. Rebuild is performed on indexes within the scope of the given base DN.
--clearDegradedState-
Indicates that indexes do not need rebuilding because they are known to be empty and forcefully marks them as valid. This is an advanced option which must only be used in cases where a degraded index is known to be empty and does not therefore need rebuilding. This situation typically arises when an index is created for an attribute which has just been added to the schema. Default: false
-i | --index {index}-
Names of index(es) to rebuild. For an attribute index this is simply an attribute name. At least one index must be specified for rebuild. Cannot be used with the "--rebuildAll" option.
--offline-
Indicates that the command must be run in offline mode. When using this option, the command writes to server files. Run the command as a user having the same filesystem permissions as the user running the server. Default: false
--rebuildAll-
Rebuild all indexes, including any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used with the "-i" option or the "--rebuildDegraded" option. Default: false
--rebuildDegraded-
Rebuild all degraded indexes, including any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used with the "-i" option or the "--rebuildAll" option. Default: false
--tmpDirectory {directory}-
Path to temporary directory for index scratch files during index rebuilding. Default: import-tmp
Task Scheduling Options
--completionNotify {emailAddress}-
Email address of a recipient to be notified when the task completes. This option may be specified more than once.
--dependency {taskID}-
ID of a task upon which this task depends. A task will not start execution until all its dependencies have completed execution.
--description {description}-
Gives a description to the task.
--errorNotify {emailAddress}-
Email address of a recipient to be notified if an error occurs when this task executes. This option may be specified more than once.
--failedDependencyAction {action}-
Action this task will take should one if its dependent tasks fail. The value must be one of PROCESS,CANCEL,DISABLE. If not specified defaults to CANCEL.
--recurringTask {schedulePattern}-
Indicates the task is recurring and will be scheduled according to the value argument expressed in crontab(5) compatible time/date pattern. The schedule pattern for a recurring task supports only the following
crontabfeatures:
| Field | Allowed Values |
|---|---|
minute |
0-59 |
hour |
0-23 |
day of month |
1-31 |
month |
1-12 (or names) |
day of week |
0-7 (0 or 7 is Sunday, or use names) |
A field can contain an asterisk, * . An asterisk stands for first-last .
Fields can include ranges of numbers. A range is two numbers separated by a hyphen, and is inclusive. For example, 8-10 for an "hour" field means execution at hours 8, 9, and 10.
Fields can include lists. A list is a set of numbers or ranges separated by commas. For example, 4,8-10 for an "hour" field means execution at hours 4, 8, 9, and 10.
When using names for in "month" or "day of week" fields, use the first three letters of the particular month or day of the week. Case does not matter. Ranges and lists of names are not supported.
-t | --start {startTime}-
Indicates the date/time at which this operation will start when scheduled as a server task expressed in YYYYMMDDhhmmssZ format for UTC time or YYYYMMDDhhmmss for local time. A value of '0' will cause the task to be scheduled for immediate execution. When this option is specified the operation will be scheduled to start at the specified time after which this utility will exit immediately.
--taskId {taskID}-
Gives an ID to the task.
Task Backend Connection Options
--connectTimeout {timeout}-
Maximum length of time (in milliseconds) that can be taken to establish a connection. Use '0' to specify no time out. Default: 30000
-D | --bindDn {bindDN}-
DN to use to bind to the server. Default: uid=admin
-E | --reportAuthzId-
Use the authorization identity control. Default: false
-h | --hostname {host}-
Fully-qualified server host name or IP address. Default: localhost.localdomain
-N | --certNickname {nickname}-
Nickname of the certificate that should be sent to the server for SSL client authentication.
-o | --saslOption {name=value}-
SASL bind options.
-p | --port {port}-
Directory server administration port number.
-T | --trustStorePassword {trustStorePassword}-
Truststore cleartext password.
--useJavaKeyStore {keyStorePath}-
JKS keystore containing the certificate which should be used for SSL client authentication.
--useJavaTrustStore {trustStorePath}-
Use a JKS truststore file for validating server certificate.
--useJceKeyStore {keyStorePath}-
JCEKS keystore containing the certificate which should be used for SSL client authentication.
--useJceTrustStore {trustStorePath}-
Use a JCEKS truststore file for validating server certificate.
--useJvmTrustStore-
Use the a JVM truststore for validating server certificate. Default: false
--usePasswordPolicyControl-
Use the password policy request control. Default: false
--usePkcs11KeyStore-
PKCS#11 keystore containing the certificate which should be used for SSL client authentication. Default: false
--usePkcs12KeyStore {keyStorePath}-
PKCS#12 keystore containing the certificate which should be used for SSL client authentication.
--usePkcs12TrustStore {trustStorePath}-
Use a PKCS#12 truststore file for validating server certificate.
-w | --bindPassword {bindPassword}-
Password to use to bind to the server. Omit this option while providing the bind DN to ensure that the command prompts for the password, rather than entering the password as a command argument.
-W | --keyStorePassword {keyStorePassword}-
Keystore cleartext password.
-X | --trustAll-
Trust all server SSL certificates. Default: false
Utility input/output options:
-n | --no-prompt-
Use non-interactive mode. If data in the command is missing, the user is not prompted and the tool will fail. Default: false
--noPropertiesFile-
No properties file will be used to get default command line argument values. Default: false
--propertiesFilePath {propertiesFilePath}-
Path to the file containing default property values used for command line arguments.
General options:
-V | --version-
Display Directory Server version information. Default: false
-H | --help-
Display this usage information. Default: false