IDM 7.3.0

Patch

To patch a resource, send an HTTP PATCH request with the following parameters:

  • operation

  • field

  • value

  • from (optional with copy and move operations)

You can include these parameters in the payload for a PATCH request, or in a JSON PATCH file. If successful, you’ll refer to a JSON response similar to:

PATCH /users/some-id HTTP/1.1
Host: example.com
Accept: application/json
Content-Length: ...
Content-Type: application/json
If-Match: _rev
{ JSON array of patch operations }

PATCH operations apply to three types of targets:

  • single-valued, such as an object, string, boolean, or number.

  • list semantics array, where the elements are ordered, and duplicates are allowed.

  • set semantics array, where the elements are not ordered, and duplicates are not allowed.

ForgeRock PATCH supports several different operations. The following sections show each of these operations, along with options for the field and value:

Patch Operation: Add

The add operation ensures that the target field contains the value provided, creating parent fields as necessary.

If the target field is single-valued, then the value you include in the PATCH replaces the value of the target. Examples of a single-valued field include: object, string, boolean, or number.

An add operation has different results on two standard types of arrays:

  • List semantic arrays: you can run any of these add operations on that type of array:

    • If you add an array of values, the PATCH operation appends it to the existing list of values.

    • If you add a single value, specify an ordinal element in the target array, or use the {-} special index to add that value to the end of the list.

  • Set semantic arrays: The value included in the patch is merged with the existing set of values. Any duplicates within the array are removed.

As an example, start with the following list semantic array resource:

{
    "fruits" : [ "orange", "apple" ]
}

The following add operation includes the pineapple to the end of the list of fruits, as indicated by the - at the end of the fruits array.

{
    "operation" : "add",
    "field" : "/fruits/-",
    "value" : "pineapple"
}

The following is the resulting resource:

{
    "fruits" : [ "orange", "apple", "pineapple" ]
}

Note that you can add only one array element one at a time, as per the corresponding JSON Patch specification. If you add an array of elements, for example:

{
    "operation" : "add",
    "field" : "/fruits/-",
    "value" : ["pineapple", "mango"]
}

The resulting resource would have the following invalid JSON structure:

{
    "fruits" : [ "orange", "apple", ["pineapple", "mango"]]
}

Patch Operation: Copy

The copy operation takes one or more existing values from the source field. It then adds those same values on the target field. Once the values are known, it is equivalent to performing an add operation on the target field.

The following copy operation takes the value from a field named mail, and then runs a replace operation on the target field, another_mail.

[
  {
     "operation":"copy",
     "from":"mail",
     "field":"another_mail"
  }
]

If the source field value and the target field value are configured as arrays, the result depends on whether the array has list semantics or set semantics, as described in Patch Operation: Add.

Patch Operation: Increment

The increment operation changes the value or values of the target field by the amount you specify. The value that you include must be one number, and may be positive or negative. The value of the target field must accept numbers. The following increment operation adds 1000 to the target value of /user/payment.

[
  {
    "operation" : "increment",
    "field" : "/user/payment",
    "value" : "1000"
  }
]

Since the value of the increment is a single number, arrays do not apply.

Patch Operation: Move

The move operation removes existing values on the source field. It then adds those same values on the target field. It is equivalent to performing a remove operation on the source, followed by an add operation with the same values, on the target.

The following move operation is equivalent to a remove operation on the source field, surname, followed by a replace operation on the target field value, lastName. If the target field does not exist, it is created.

[
  {
     "operation":"move",
     "from":"surname",
     "field":"lastName"
  }
]

To apply a move operation on an array, you need a compatible single-value, list semantic array, or set semantic array on both the source and the target. For details, refer to the criteria described in Patch Operation: Add.

Patch Operation: Remove

The remove operation ensures that the target field no longer contains the value provided. If the remove operation does not include a value, the operation removes the field. The following remove deletes the value of the phoneNumber, along with the field.

[
  {
    "operation" : "remove",
    "field" : "phoneNumber"
  }
]

If the object has more than one phoneNumber, those values are stored as an array.

A remove operation has different results on two standard types of arrays:

  • List semantic arrays: A remove operation deletes the specified element in the array. For example, the following operation removes the first phone number, based on its array index (zero-based):

    [
       {
          "operation" : "remove",
          "field" : "/phoneNumber/0"
       }
    ]
  • Set semantic arrays: The list of values included in a patch are removed from the existing array.

Patch Operation: Replace

The replace operation removes any existing value(s) of the targeted field, and replaces them with the provided value(s). It is essentially equivalent to a remove, followed by a add operation. If the arrays are used, the criteria is based on Patch Operation: Add. However, indexed updates are not allowed, even when the target is an array.

The following replace operation removes the existing telephoneNumber value for the user, and then adds the new value of +1 408 555 9999.

[
  {
    "operation" : "replace",
    "field" : "/telephoneNumber",
    "value" : "+1 408 555 9999"
  }
]

A PATCH replace operation on a list semantic array works in the same fashion as a PATCH remove operation. The following example demonstrates how the effect of both operations. Start with the following resource:

{
    "fruits" : [ "apple", "orange", "kiwi", "lime" ],
}

Apply the following operations on that resource:

[
  {
    "operation" : "remove",
    "field" : "/fruits/0",
    "value" : ""
  },
  {
    "operation" : "replace",
    "field" : "/fruits/1",
    "value" : "pineapple"
  }
]

The PATCH operations are applied sequentially. The remove operation removes the first member of that resource, based on its array index, (fruits/0), with the following result:

[
  {
    "fruits" : [ "orange", "kiwi", "lime" ],
  }
]

The second PATCH operation, a replace, is applied on the second member (fruits/1) of the intermediate resource, with the following result:

[
  {
    "fruits" : [ "orange", "pineapple", "lime" ],
  }
]

Patch Operation: Transform

The transform operation changes the value of a field based on a script or some other data transformation command. The following transform operation takes the value from the field named /objects, and applies the something.js script as shown:

[
  {
    "operation" : "transform",
    "field" : "/objects",
    "value" : {
      "script" : {
        "type" : "text/javascript",
        "file" : "something.js"
      }
    }
  }
]

Patch Operation Limitations

Some HTTP client libraries do not support the HTTP PATCH operation. Make sure that the library you use supports HTTP PATCH before using this REST operation.

For example, the Java Development Kit HTTP client does not support PATCH as a valid HTTP method. Instead, the method HttpURLConnection.setRequestMethod("PATCH") throws ProtocolException.

Parameters

You can use the following parameters. Other parameters might depend on the specific action implementation:

_prettyPrint=true

Format the body of the response.

_fields=field[,field...]

Return only the specified fields in the body of the response.

The field values are JSON pointers. For example if the resource is {"parent":{"child":"value"}}, parent/child refers to the "child":"value".

If the field is left blank, the server returns all default values.

Copyright © 2010-2023 ForgeRock, all rights reserved.