Sun/Oracle DSEE
Use these attributes when configuring data stores for Oracle DSEE or Sun DSEE using AM schema:
amster service name: IdRepository
ssoadm service name: sunIdentityRepositoryService
LDAP Server
host:port to contact the directory server,
with optional |serverID|siteID for deployments with multiple servers and sites.
AM uses the optional settings to determine which directory server to contact first. AM tries to contact directory servers in the following priority order, with highest priority first:
-
The first directory server in the list whose serverID matches the current AM server.
-
The first directory server in the list whose siteID matches the current AM server.
-
The first directory server in the remaining list.
If the directory server is not available, AM proceeds to the next directory server in the list.
|
XUI
Default: |
|
ssoadm
Default: You must add Example: sun-idrepo-ldapv3-config-ldap-server=[0]=localhost:51636|01 sun-idrepo-ldapv3-config-ldap-server=[1]=openam.example.com:52389|02 sun-idrepo-ldapv3-config-ldap-server=[2]=zzz.example.com:1636|01|02 sun-idrepo-ldapv3-config-ldap-server=[3]=xxx.example.com:1636|01|02 |
LDAP Bind DN
Bind DN of the service account AM uses to connect to the directory server. Some AM capabilities require write access to directory entries.
ssoadm attribute: sun-idrepo-ldapv3-config-authid
Default: cn=dsameuser,ou=DSAME Users,base-dn
LDAP Bind Password
Bind password for connecting to the directory server.
ssoadm attribute: sun-idrepo-ldapv3-config-authpw
LDAP Organization DN
The base DN under which to find user and group profiles.
Ensure that the identity store is setup with the specified DN before making any changes to this property in AM.
ssoadm attribute: sun-idrepo-ldapv3-config-organization_name
Default: base-dn
LDAP Connection Mode
Whether to use LDAP, LDAPS or StartTLS to connect to the directory server. When LDAPS or StartTLS are enabled, AM must be able to trust server certificates, either because the server certificates were signed by a CA whose certificate is already included in the trust store used by the container where AM runs, or because you imported the certificates into the trust store.
ssoadm attribute: sun-idrepo-ldapv3-config-connection-mode
Possible values: LDAP, LDAPS, and StartTLS
LDAP Connection Pool Maximum Size
Maximum number of connections to the directory server. Make sure the directory service can cope with the maximum number of client connections across all servers.
ssoadm attribute: sun-idrepo-ldapv3-config-connection_pool_max_size
Default: 10
LDAP Connection Heartbeat Interval
How often to send a heartbeat request to the directory server to ensure that the connection does not remain idle. Some network administrators configure firewalls and load balancers to drop connections that are idle for too long. You can turn this off by setting the value to 0. To set the units for the interval, use LDAP Connection Heartbeat Time Unit.
ssoadm attribute: openam-idrepo-ldapv3-heartbeat-interval
Default: 10
LDAP Connection Heartbeat Search Base
Defines the search base for:
-
The heartbeat request that checks connections to the LDAP server are alive and prevents idle timeouts (keepalive).
-
The load balancer availability check.
The keepalive and availability checks are only enabled if the heartbeat interval and timeout
are set to a value greater than 0.
The LDAP server connection pool will be marked as unavailable if the search fails with an error, returns no entries, or if more than one entry is returned.
If the search results in an error, AM fails to start up with an exception such as
org.forgerock.opendj.ldap.ConnectionException: Connect Error: No operational connection factories available.
ssoadm attribute: openam-idrepo-ldapv3-keepalive-searchbase
Default: [Empty]
LDAP Connection Heartbeat Search Filter
Defines the search filter for:
-
The heartbeat request that checks connections to the LDAP server are alive and prevents idle timeouts (keepalive).
-
The load balancer availability check.
You can also use the absolute True and False filter (&).
The LDAP server connection pool will be marked as unavailable if the search fails with an error, returns no entries, or if more than one entry is returned.
If the search results in an error, AM fails to start up with an exception such as
org.forgerock.opendj.ldap.ConnectionException: Connect Error: No operational connection factories available.
ssoadm attribute: openam-idrepo-ldapv3-keepalive-searchfilter
Default: (objectClass=*)
LDAP Connection Heartbeat Time Unit
Time unit for the LDAP Connection Heartbeat Interval setting.
ssoadm attribute: openam-idrepo-ldapv3-heartbeat-timeunit
Default: second
Maximum Results Returned from Search
A cap for the number of search results to return, for example, when viewing profiles under Identities. Rather than raise this number, consider narrowing your search to match fewer directory entries.
ssoadm attribute: sun-idrepo-ldapv3-config-max-result
Default: 1000
Search Timeout
Maximum time to wait for search results in seconds. Does not apply to persistent searches.
ssoadm attribute: sun-idrepo-ldapv3-config-time-limit
Default: 10
LDAPv3 Plugin Search Scope
LDAP searches can apply to a single entry (SCOPE_BASE), entries directly below the search DN (SCOPE_ONE),
or all entries below the search DN (SEARCH_SUB).
ssoadm attribute: sun-idrepo-ldapv3-config-search-scope
Default: SCOPE_SUB
LDAPv3 Repository Plugin Class Name
AM identity repository implementation.
ssoadm attribute: sunIdRepoClass
Default: org.forgerock.openam.idrepo.ldap.DJLDAPv3Repo
Attribute Name Mapping
Map of AM profile attribute names to directory server attribute names.
ssoadm attribute: sunIdRepoAttributeMapping
LDAPv3 Plugin Supported Types and Operations
Specifies the identity types supported by the data store, such as user, group, or realm,
and which operations can be performed on them.
The following table illustrates the identity types supported by this data store, and the operations that can be performed on them:
Supported Identity Types and Operations
| read | create | edit | delete | service | |
|---|---|---|---|---|---|
|
✔ |
✔ |
✔ |
✔ |
|
|
✔ |
✔ |
✔ |
✔ |
✔ |
|
✔ |
✔ |
✔ |
✔ |
✔ |
|
✔ |
✔ |
✔ |
✔ |
|
filteredrole |
✔ |
✔ |
✔ |
✔ |
|
Read the identity type |
Create new identities of the given identity type |
Edit entities of the given identity type |
Delete entities of the given identity type |
Read and write service settings associated with the given identity type. |
You can remove permissions based on your data store needs.
For example, if the data store should not be written to,
you can set the operations to read only for the identity types.
The service operation is only relevant to the realm and the user identity types.
For example, the Session Service configuration can be stored by realm,
and a user can have specific session timeout settings.
ssoadm attribute: sunIdRepoSupportedOperations
Default:
filteredrole=read,create,edit,delete
group=read,create,edit,delete
realm=read,create,edit,delete,service
role=read,create,edit,delete
user=read,create,edit,delete,service
LDAP Users Search Attribute
When searching for a user by name, match values against this attribute.
ssoadm attribute: sun-idrepo-ldapv3-config-users-search-attribute
Default: uid
|
Do not modify the value of the search attribute in user profiles. Modifying this attribute value can result in incorrectly cached identity data. |
LDAP Users Search Filter
When searching for users, apply this LDAP search filter as well.
ssoadm attribute: sun-idrepo-ldapv3-config-users-search-filter
Default: (objectclass=inetorgperson)
LDAP People Container Naming Attribute
RDN attribute of the LDAP base DN which contains user profiles.
ssoadm attribute: sun-idrepo-ldapv3-config-people-container-name
Default: ou
LDAP People Container Value
RDN attribute value of the LDAP base DN which contains user profiles.
If specified, AM will limit searches for user profiles to the provided base DN. Otherwise, AM searches the entire directory.
ssoadm attribute: sun-idrepo-ldapv3-config-people-container-value
Default: people
LDAP User Object Class
User profiles have these LDAP object classes.
AM handles only those attributes listed in this setting. AM discards any unlisted attributes from requests and the request proceeds without the attribute.
For example, with default settings, if you request that AM execute a search that asks
for the mailAlternateAddress attribute, AM does the search, but does not request mailAlternateAddress.
In the same way, AM does perform an update operation with a request
to set the value of an unlisted attribute like mailAlternateAddress,
but it drops the unlisted attribute from the update request.
ssoadm attribute: sun-idrepo-ldapv3-config-user-objectclass
Default:
devicePrintProfilesContainer
forgerock-am-dashboard-service
iPlanetPreferences
inetadmin
inetorgperson
inetuser
iplanet-am-auth-configuration-service
iplanet-am-managed-person
iplanet-am-user-service
kbaInfoContainer
oathDeviceProfilesContainer
organizationalperson
person
pushDeviceProfilesContainer
sunAMAuthAccountLockout
sunFMSAML2NameIdentifier
sunFederationManagerDataStore
sunIdentityServerLibertyPPService
top
LDAP User Attributes
User profiles have these LDAP attributes.
AM handles only those attributes listed in this setting. AM discards any unlisted attributes from requests and the request proceeds without the attribute.
ssoadm attribute: sun-idrepo-ldapv3-config-user-attributes
Default:
assignedDashboard
authorityRevocationList
caCertificate
cn
createTimestamp
devicePrintProfiles
distinguishedName
adminRole
dn
employeeNumber
givenName
inetUserHttpURL
inetUserStatus
iplanet-am-auth-configuration
iplanet-am-session-destroy-sessions
iplanet-am-session-get-valid-sessions
iplanet-am-session-max-caching-time
iplanet-am-session-max-idle-time
iplanet-am-session-max-session-time
iplanet-am-session-quota-limit
iplanet-am-session-service-status
iplanet-am-static-group-dn
iplanet-am-user-account-life
iplanet-am-user-admin-start-dn
iplanet-am-user-alias-list
iplanet-am-user-auth-config
iplanet-am-user-auth-modules
iplanet-am-user-failure-url
iplanet-am-user-federation-info
iplanet-am-user-federation-info-key
iplanet-am-user-login-status
iplanet-am-user-password-reset-force-reset
iplanet-am-user-password-reset-options
iplanet-am-user-password-reset-question-answer
iplanet-am-user-success-url
kbaActiveIndex
kbaInfo
mail
manager
memberOf
modifyTimestamp
oath2faEnabled
oathDeviceProfiles
objectClass
postalAddress
preferredLocale
preferredlanguage
preferredtimezone
pushDeviceProfiles
sn
sun-fm-saml2-nameid-info
sun-fm-saml2-nameid-infokey
sunAMAuthInvalidAttemptsData
sunIdentityMSISDNNumber
sunIdentityServerDiscoEntries
sunIdentityServerPPAddressCard
sunIdentityServerPPCommonNameAltCN
sunIdentityServerPPCommonNameCN
sunIdentityServerPPCommonNameFN
sunIdentityServerPPCommonNameMN
sunIdentityServerPPCommonNamePT
sunIdentityServerPPCommonNameSN
sunIdentityServerPPDemographicsAge
sunIdentityServerPPDemographicsBirthDay
sunIdentityServerPPDemographicsDisplayLanguage
sunIdentityServerPPDemographicsLanguage
sunIdentityServerPPDemographicsTimeZone
sunIdentityServerPPEmergencyContact
sunIdentityServerPPEmploymentIdentityAltO
sunIdentityServerPPEmploymentIdentityJobTitle
sunIdentityServerPPEmploymentIdentityOrg
sunIdentityServerPPEncryPTKey
sunIdentityServerPPFacadeGreetSound
sunIdentityServerPPFacadeMugShot
sunIdentityServerPPFacadeNamePronounced
sunIdentityServerPPFacadeWebSite
sunIdentityServerPPFacadegreetmesound
sunIdentityServerPPInformalName
sunIdentityServerPPLegalIdentityAltIdType
sunIdentityServerPPLegalIdentityAltIdValue
sunIdentityServerPPLegalIdentityDOB
sunIdentityServerPPLegalIdentityGender
sunIdentityServerPPLegalIdentityLegalName
sunIdentityServerPPLegalIdentityMaritalStatus
sunIdentityServerPPLegalIdentityVATIdType
sunIdentityServerPPLegalIdentityVATIdValue
sunIdentityServerPPMsgContact
sunIdentityServerPPSignKey
telephoneNumber
uid
userCertificate
userPassword
Create User Attribute Mapping
When creating a user profile, apply this map of AM profile attribute names to directory server attribute names.
Attributes not mapped to another attribute (for example, cn) and attributes mapped to themselves
(for example, cn=cn) take the value of the username unless the attribute values
are provided when creating the profile.
The object classes for user profile LDAP entries generally require Common Name (cn) and Surname (sn) attributes,
so this prevents an LDAP constraint violation when performing the add operation.
ssoadm attribute: sun-idrepo-ldapv3-config-createuser-attr-mapping
Default: cn, sn
Attribute Name of User Status
Attribute to check/set user status.
ssoadm attribute: sun-idrepo-ldapv3-config-isactive
Default: inetuserstatus
User Status Active Value
Active users have the user status attribute set to this value.
ssoadm attribute: sun-idrepo-ldapv3-config-active
Default: Active
User Status Inactive Value
Inactive users have the user status attribute set to this value.
ssoadm attribute: sun-idrepo-ldapv3-config-inactive
Default: Inactive
Authentication Naming Attribute
RDN attribute for building the bind DN when given a username and password to authenticate a user against the directory server.
|
If you change this value after you have deployed and configured AM, you must update or recreate all existing identities to refresh user DNs. Failure to do so could result in unsuccessful authentication or risk of impersonation attacks. |
ssoadm attribute: sun-idrepo-ldapv3-config-auth-naming-attr
Default: uid
LDAP Groups Search Attribute
When searching for a group by name, match values against this attribute.
ssoadm attribute: sun-idrepo-ldapv3-config-groups-search-attribute
Default: cn
LDAP Groups Search Filter
When searching for groups, apply this LDAP search filter as well.
ssoadm attribute: sun-idrepo-ldapv3-config-groups-search-filter
Default: (objectclass=groupOfUniqueNames)
LDAP Groups Container Naming Attribute
RDN attribute of the LDAP base DN which contains group profiles.
ssoadm attribute: sun-idrepo-ldapv3-config-group-container-name
Default: ou
LDAP Groups Container Value
RDN attribute value of the LDAP base DN which contains group profiles.
If specified, AM will limit searches for group profiles to the provided base DN. Otherwise, AM searches the entire directory.
ssoadm attribute: sun-idrepo-ldapv3-config-group-container-value
Default: groups
LDAP Groups Object Class
Group profiles have these LDAP object classes.
ssoadm attribute: sun-idrepo-ldapv3-config-group-objectclass
Default: groupofuniquenames, iplanet-am-managed-group, iplanet-am-managed-static-group, groupofurls, top
LDAP Groups Attributes
Group profiles have these LDAP attributes.
ssoadm attribute: sun-idrepo-ldapv3-config-group-attributes
Default: cn, iplanet-am-group-subscribable, dn, objectclass, uniqueMember
Attribute Name for Group Membership
LDAP attribute in the member’s LDAP entry whose values are the groups to which a member belongs.
ssoadm attribute: sun-idrepo-ldapv3-config-memberof
Attribute Name of Unique Member
Attribute in the group’s LDAP entry whose values are the members of the group.
ssoadm attribute: sun-idrepo-ldapv3-config-uniquemember
Default: uniqueMember
Attribute Name of Group Member URL
Attribute in the dynamic group’s LDAP entry whose values are LDAP URLs specifying members of the group.
ssoadm attribute: sun-idrepo-ldapv3-config-memberurl
Default: memberUrl
LDAP Roles Search Attribute
When searching for a role by name, match values against this attribute.
ssoadm attribute: sun-idrepo-ldapv3-config-roles-search-attribute
Default: cn
LDAP Roles Search Filter
When searching for roles, apply this LDAP search filter as well.
ssoadm attribute: sun-idrepo-ldapv3-config-roles-search-filter
Default: (&(objectclass=ldapsubentry)(objectclass=nsmanagedroledefinition))
LDAP Roles Object Class
Role profiles have these LDAP object classes.
ssoadm attribute: sun-idrepo-ldapv3-config-role-objectclass
Default: ldapsubentry, nsmanagedroledefinition, nsroledefinition, nssimpleroledefinition, top
LDAP Filter Roles Search Attribute
When searching for a filtered role by name, match values against this attribute.
ssoadm attribute: sun-idrepo-ldapv3-config-filterroles-search-attribute
Default: cn
LDAP Filter Roles Search Filter
When searching for filtered roles, apply this LDAP search filter as well.
ssoadm attribute: sun-idrepo-ldapv3-config-filterroles-search-filter
Default: (&(objectclass=ldapsubentry)(objectclass=nsfilteredroledefinition))
LDAP Filter Roles Object Class
Filtered role profiles have these LDAP object classes.
ssoadm attribute: sun-idrepo-ldapv3-config-filterrole-objectclass
Default: ldapsubentry, nscomplexroledefinition, nsfilteredroledefinition, nsroledefinition
LDAP Filter Roles Attributes
Filtered role profiles have these LDAP attributes.
ssoadm attribute: sun-idrepo-ldapv3-config-filterrole-attributes
Default: nsRoleFilter
Attribute Name for Filtered Role Membership
LDAP attribute in the member’s LDAP entry whose values are the filtered roles to which a member belongs.
ssoadm attribute: sun-idrepo-ldapv3-config-nsrole
Default: nsrole
Attribute Name of Role Membership
LDAP attribute in the member’s LDAP entry whose values are the roles to which a member belongs.
ssoadm attribute: sun-idrepo-ldapv3-config-nsroledn
Default: nsRoleDN
Attribute Name of Filtered Role Filter
LDAP attribute whose values are the filters for filtered roles.
ssoadm attribute: sun-idrepo-ldapv3-config-nsrolefilter
Default: nsRoleFilter
Persistent Search Base DN
Base DN for LDAP-persistent searches used to receive notification of changes in directory server data.
ssoadm attribute: sun-idrepo-ldapv3-config-psearchbase
Default: base-dn
Persistent Search Filter
LDAP filter to apply when performing persistent searches.
ssoadm attribute: sun-idrepo-ldapv3-config-psearch-filter
Default: (objectclass=*)
Persistent Search Scope
LDAP searches can apply to a single entry (SCOPE_BASE), entries directly below the search DN (SCOPE_ONE),
or all entries below the search DN (SEARCH_SUB).
ssoadm attribute: sun-idrepo-ldapv3-config-psearch-scope
Default: SCOPE_SUB
The Delay Time Between Retries
How long to wait after receiving an error result that indicates AM should try the LDAP operation again.
ssoadm attribute: com.iplanet.am.ldap.connection.delay.between.retries
Default: 1000 milliseconds
DN Cache Enabled
Whether to enable the DN cache, which is used to cache DN lookups that can happen in bursts during authentication. As the cache can become stale when a user is moved or renamed, enable DN caching when the directory service allows move/rename operations (Mod DN), and when AM uses persistent searches to obtain notification of such updates.
ssoadm attribute: sun-idrepo-ldapv3-dncache-enabled
Default: true